JaLCDOI 10.18926/17833
FullText URL Mem_Fac_Eng_OU_43_27.pdf
Author Totsuji, Hiroo|
Abstract When the Coulomb coupling between fine particles becomes sufficiently strong in fine particle plasmas, the isothermal compressibility of the whole system diverges and we have a phase separation and an associated critical point. Experimental conditions of fine particle plasmas, densities and temperatures of components and the fine particle size, are obtained corresponding to characteristic parameters around the critical point and the dependency on ion species and other factors is discussed.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 27
End Page 31
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308947
JaLCDOI 10.18926/17831
FullText URL Mem_Fac_Eng_OU_43_22.pdf
Author Totsuji, Hiroo| Chai Hong| Totsuji, Chieko| Tsuruta, Kenji|
Abstract For the transfer of quantum information and the creation of entangled states, the application of tuned spin chains, systems of spins with the nearest-neighbor coupling tuned so as to give high efficiency, has been proposed and some examples of high performance have been given by several authors. In this article, the effect of deviations from tuned values and the effect of resultant asymmetry are investigated through numerical simulations and theoretical analyses. It is shown that there exists a system where the transfer efficiency is comparable with exactly tuned ones and, at the same time, robust to noises in the coupling constants. It is also shown that the effect of asymmetry on the efficiency of entanglement creation is of the second order when the asymmetry is small.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 22
End Page 26
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308966
JaLCDOI 10.18926/17829
FullText URL Mem_Fac_Eng_OU_43_16.pdf
Author Kurose Tomoyuki| Tsuruta, Kenji| Totsuji, Chieko| Totsuji, Hiroo|
Abstract The finite-difference time-domain (FDTD) method has been applied to the calculation of the phonon band structure of two-dimensional (2D) phononic crystals, consisting of metal cylinders placed periodically in liquid. By comparing several combinations of materials for metal cylinder and liquid, we analyze the dependence of the band structures on sound speed and density of liquid media. Moreover, the negative refraction of the acoustic waves is observed at the interfaces between phononic crystal slab and the liquid. We find that an acoustic“lens effect”with the slab appears due to the negative refractions. The relationship between the focal intensity in the lens effect and the band structure is discussed.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 16
End Page 21
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308928
JaLCDOI 10.18926/17826
FullText URL Mem_Fac_Eng_OU_43_8.pdf
Author Umeda Ryosuke| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo|
Abstract Metamaterial which has negative permittivity and permeability is investigated via computer simulations. Effects of the nanostructure on dielectric and magnetic properties of the material are taken into account by introducing the Drude-Lorentz model in the materials dispersion. We include multi-band process in the dielectric response in order to reproduce accurately experimental values of bulk Au thin film. Size effect on the dispersion is examined by comparing the model with that of a noble metal particle. Based on the dispersion model constructed, we analyze the electromagnetic response of nanostructured metamaterials to evanescent waves at microwave and optical frequencies via finite-difference time-domain simulatioins on parallel computer. A re- focusing and an amplification of the evanescent waves propagating through a metamaterial, consisting of metal slab/vacuum stacking, is demonstrated for the frequencies of 30GHz and 744THz.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 8
End Page 15
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308833
JaLCDOI 10.18926/17822
FullText URL Mem_Fac_Eng_OU_43_1.pdf
Author Shimizu, Kenichi| Torii, Tashiyuki| Ishida, Koki|
Abstract Using a fatigue testing method by which fatigue cracks can be initiated and propagated in a film adhered to cover an elliptical through-hole in a base plate subjected to push-pull cyclic loads, annealed copper films with the thickness of 100μm and those reduced the thickness from the 100μm to 50μm by an electro-polishing were fatigued under a constant stress amplitude with a stress ratio of zero. The crystal rotation behavior with the fatigue crack propagation was investigated by measuring the crystal orientation around the fatigue crack initiated from the notch root before and after fatigue testing, using EBSD (Electron Back-scatter Diffraction) method. Then, the change of crystal orientation with fatigue testing was evaluated quantitatively from the misorientation between the crystal orientation matrix on the same point obtained before and after fatigue testing. As a result, the angle of the crystal rotation obtained from the region showing the high fatigue crack propagation rate was larger than that obtained from the region showing the low fatigue crack propagation rate for the film with the thickness of 100μm, while the fatigue crack propagated faster in the film with the thickness of 50μm than that with the thickness of 100μm regardless of the small crystal rotation angles with the fatigue testing for the film with the thickness of 50μm.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 1
End Page 7
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308710
JaLCDOI 10.18926/15517
FullText URL Mem_Fac_Eng_OU_25_2_123.pdf
Author Taniguchi, Takeo| Ohta, Chikashi|
Abstract The aim of this investigation is the proposal of 3D mesh generation method based on the Delaunay triangulation. The method is valid for the finite element modelling of any convex 3D domain into tetrahedra with optimum geometrical configuration. This paper includes the mathematical background of the mesh generation method, its detail, proposal of some efficient tools for faster and more rigorous computations, and some examples of the mesh generation.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 123
End Page 133
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307904
JaLCDOI 10.18926/15516
FullText URL Mem_Fac_Eng_OU_25_2_115.pdf
Author Taniguchi, Takeo| Irie Hirotsugu|
Abstract Nested dissection method is an elimination method for a set of linear algebraic equations with minimum fillins. Physically it divides a domain into four subdomains, and each subdomain is again divided into four. This procedure is repeated till all nodes are included in some subdomains. Using this characteristic, the authors examine the efficiency of the method on the transputer.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 115
End Page 122
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307316
JaLCDOI 10.18926/15515
FullText URL Mem_Fac_Eng_OU_25_2_95.pdf
Author Totsuji, Hiroo| Ishikura Satoshi| Takayama Norihisa|
Abstract Critical temperatures of two-dimensional microstructures with superconducting proximity effect in the dirty limit are evaluated for various geometrical constructions. As a numerical method, the finite element method is applied. Guidelines in estimating critical temperatures are given for the case where the decay of superconducting order parameter is either sufficiently slow or fast in comparison with the scale length of the structure.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 95
End Page 113
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307413
JaLCDOI 10.18926/15513
FullText URL Mem_Fac_Eng_OU_25_2_81.pdf
Author Totsuji, Hiroo|
Abstract Numerical methods for the analysis of the proximity effect in superconducting microstructures in the dirty limit are formulated on the basis of the finite element method. One- and two-dimensional cases are considered and third order Hermite shape functions are used. The results are also applicable to investigations of electronic states in semiconductor superlattice structures.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 81
End Page 93
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307242
JaLCDOI 10.18926/15512
FullText URL Mem_Fac_Eng_OU_25_2_69.pdf
Author Tsuchiya Takao| Kagawa, Yukio|
Abstract A finite element approach to the calculation of nonlinear sound propagation is proposed. Under the assumption of a weak nonlinearity, a linearized one-dimensional equation is considered. The equation is discretized in space, and is then solved for time by using Newmark-β integration scheme, in which a numerical damping is devised. Some numerical demonstrations are made for the nonlinear sound propagation of a single-shot pulse in air. It is shown that the shock wave propagation is stably and accurately simulated by the introduction of the numerical damping.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 69
End Page 80
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307747
JaLCDOI 10.18926/15507
FullText URL Mem_Fac_Eng_OU_24_2_99.pdf
Author Taniguchi, Takeo| Fujiwara Kohji|
Abstract This paper presents an effective solver for a large sparse set of linear algebraic equations, which appears at the application of the finite element and the finite difference methods in engineering field. Proposed method is a family of SKYLINE METHOD, and for faster computation on the vector processors the original skyline is modified with respect to following three items; the use of inner products of matrix operations, the removal of unnecessary numerical operations and the introduction of two-dimensional array for storing the data of coefficient matrix.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-03-29
Volume volume24
Issue issue2
Start Page 99
End Page 112
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307515
JaLCDOI 10.18926/15506
FullText URL Mem_Fac_Eng_OU_25_2_17.pdf
Author Sakakibara, Akira| Kanadani, Teruto| Kaneeda, Toshiaki| Hosokawa, Norio|
Abstract Effect of the soft surface layer that was formed on low temperature aging of Al-Zn alloy on fatigue strength was studied under repeated tensile loading. Vickers microhardness test revealed that there existed less hardened region in the vicinity of grain boundary and surface, and that the region extends 50 to 100μm from the surface inward. From the plot of the stress amplitude against the number of cycles to failure, it is concluded that the presence of less hardened surface layer strengthens fatigue resistance of the age hardened Al-Zn alloys containing 8 to 16mass % Zn under the repeated tensile loading.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 17
End Page 23
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307685
JaLCDOI 10.18926/15503
FullText URL Mem_Fac_Eng_OU_25_2_9.pdf
Author Mikuni, Masato| Hida, Moritaka| Nishida, Norihide| Sakakibara, Akira| Yamada, Masuo|
Abstract Strains induced in the Si substrates by TiN film were observed with X-ray topography. The image of the sample with TiN film 0.45μm thick was like that of a dislocation loop observed with transmission electron microscope. The images of the samples with TiN films 1.65, and 1.9μm thick were different; blackening spreaded in the <112> and <110> direction from the ring contrast in shape of four-lobed rosette pattern. Spreading extended 1.6 times longer than the radius of the ring contrast along the <112> direction. The strain field extended 0.1μm in depth from the top surface where TiN was plated. From the topographs of bent Si beam, it was found that the blackness was almost proportional to the strain. The strains induced by TiN film locally ion-plated were smaller than those observed previously when TiN was ion-plated on the whole top surface of the substrate. Fine structures were observed in the topographs which could not be explained by the kinematical theory.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-03-28
Volume volume25
Issue issue2
Start Page 9
End Page 15
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307429
JaLCDOI 10.18926/15502
FullText URL Mem_Fac_Eng_OU_24_2_79.pdf
Author Sato, Yoichiro|
Abstract In asynchronous arbiters, failures may happen, caused by metastable operations. The purpose of this study is to derive a formula to estimate such failures in a ring arbiter as mean time between failures (MTBF), under the condition that incidences of requests issued in all devices are different from each other. The operation of the arbiter is formularized by a markov chain. This chain is used to decide the probability at which each of possible failures contributes to MTBF. The sum of such probabilities gives the MTBF which can be represented as a sum of a finite number of terms. As an example, MTBF of a ring arbiter composed of 3 cells is shown.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-03-29
Volume volume24
Issue issue2
Start Page 79
End Page 87
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307486
JaLCDOI 10.18926/15499
FullText URL Mem_Fac_Eng_OU_24_2_49.pdf
Author Mori, Chuji| Machida Ken-ichi|
Abstract Distance measurements have been more and more easy and accurate to carry out, and it is expected that distance mesurements may provide rather accurate results than angle measurements. Under these circumstances, caracteritics of errors in typical trilateration nets are investigated. The nets investigated are as follows: From single row of chains to pranimetrically extended nets in figure, open and closed networks with respect to external constraint, and with and without as to internal constraint. Computations are performed by use of the method of condition equations, and behaviours of error propagation and errors of coordinates of stations in the nets are shown in case of typical nets. For example, effects for decrease in error by composing a double row of chains and by enforcing external constraints are explained.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-03-29
Volume volume24
Issue issue2
Start Page 49
End Page 65
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307544
JaLCDOI 10.18926/15497
FullText URL Mem_Fac_Eng_OU_24_2_41.pdf
Author Totsuji, Hiroo|
Abstract A possibility to control the microscopic superconducting channel based on the proximity effect is theoretically shown by a simple one-dimensional analysis of de Gennes' equation for the order parameter.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-03-29
Volume volume24
Issue issue2
Start Page 41
End Page 47
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307289
JaLCDOI 10.18926/15496
FullText URL Mem_Fac_Eng_OU_25_1_89.pdf
Author Abe, Hirofumi| Oishi Manabu|
Abstract Multidimensional scaling (MDS) has been used in a wide variety of research fields; psychology, political science, anthropology, marketing research, urban and regional planning, and so on. In practical terms, MDS is a statistical method to make a picture of the information in the data. It enables us to examine the "hidden structure" of a set of data. When the set of data is large, MDS is extremely useful, since it is easier and more informative to look at a picture than the data themselves. In this paper, MDS is applied to the interregional migration data of Japanese regions for the years 1960-85. Findings show that the two-dimensional configuration of regions estimated by MDS generally corresponds with the geographical locations of regions, and the structure of interregional migration was very stable over the study years 1960-85. It is also suggested that MDS is a useful tool to identify the relationships between regions using the spatial interaction data.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-12-14
Volume volume25
Issue issue1
Start Page 89
End Page 98
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307404
JaLCDOI 10.18926/15494
FullText URL Mem_Fac_Eng_OU_25_1_71.pdf
Author Myojin Sho| Yamada Masahito| Fujii Naoto|
Abstract A transportation planning way of approach is applied to optimal pricing and planning of urban expressway network. Two kinds of network are investigated ; four radials with one ring system and four radials with two rings system. The model is composed of three submodels ; road systell, trip generation-attraction and traffic diversion. Some iaplicative aspects are shown of the optimal solutions that maximize the aggregate number of the trips diverted to expressway under constraints ; equilibrium of revenue and expenditure and traffic capacity constraint. (1) traffic flow has the peaks at junctions on radial expressway that are adjusted to be equal to the traffic capacity. (2) two rings system realizes the larger aggregate number of diverted trips by lower toll rate than one ring system does. (3) well-located second ring has a remarkable effect on improvement in accessibility to expressway and (4) some parameters in the model have curious effects on the optimal system.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-12-14
Volume volume25
Issue issue1
Start Page 71
End Page 87
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307618
JaLCDOI 10.18926/15493
FullText URL Mem_Fac_Eng_OU_24_2_17.pdf
Author Konishi, Tadataka| Baba, Mitsuru|
Abstract Pressure distribution has been measured and analyzed to clarify the fundamental characteristics of "continuous oil-film" formed in a transparent journal bearing, into which oil in general use is supplied. Measured pressure mostly shows quasi-Sommerfeld distribution, which is characterized by downstream shift of pressure profile and underdevelopment of pressure trough compared with Sommerfeld distribution for perfect oil-film. Sommerfeld distribution is approximately observed only under limited conditions : low eccentricity and low speed. Quasi-Sommerfeld state is rather common in "continuous oil-film", unruptured film formed by using practical lubricants, than Sommerfeld state. Continuous oil-film is accompanied by fine bubbles and is controlled by the growing up or down of the bubbles.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-03-29
Volume volume24
Issue issue2
Start Page 17
End Page 30
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307431
JaLCDOI 10.18926/15491
FullText URL Mem_Fac_Eng_OU_24_2_11.pdf
Author Sakakibara, Akira| Kanadani, Teruto|
Abstract Aging behavior of Al-0.23mass % Si alloy was studied by measurements of elecrical resistivity. Resistvity maximum was observed in the aging curves at 273K after quenching from various temperatures. Appearance of maximum and its dependence on the quenching temperature were attributed to the formation of GP zones. Even in a more dilute alloy as 0.01mass % Si, the maximum of resistivity was also recognized.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1990-03-29
Volume volume24
Issue issue2
Start Page 11
End Page 16
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307615