JaLCDOI 10.18926/15454
フルテキストURL Mem_Fac_Eng_OU_22_63.pdf
著者 Myojin Syo| Kishino Keiichi| Yamada Masahito|
抄録 The paper is a case study mode choice in interregional occupational person trips. Disagregate behavioral model of logit type is applied to the occupational person trips from Tsuyama area in Okayama Prefecture to Osaka area. The model turned out to give asignificant explanation of the interregional mode choice characteristics. Travel time, travelling expenses and " with or wi thout heavy baggage " were found to be significant.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-03-31
22巻
開始ページ 63
終了ページ 70
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307421
JaLCDOI 10.18926/15455
フルテキストURL Mem_Fac_Eng_OU_23_1_1.pdf
著者 松田 正明| 大崎 紘一|
抄録 Display equipment has been used as communication media in the factory, office, and home. In order to communicate effectively, it is necessary to clarify the characteristics of eye movement in the case of looking at the display. The development of Eye Camera enables us to measure eye movement during work, so that we can collect the many data of eye movement during work. In this study, we proposed a method to evaluate the visual work using the distribution of visual points in X and Y axis. The cumulative distribution is approximated by the logistic curve which shows the symmetry and kurtosis by the parameter. The proposed method was applied to the three typical display models, that is, the digital meter model, reading model, and game model. In the digital meter model, the visual points were distributed symmetrically along the meters, and the symmetry and kurtosis of the distribution varied by the arranged direction of the meter. In the reading model, the visual points were distributed nearly symmetrically and uniformly in each axis and they were moved around the character and line from the period of spectrum analysis. In the game model, the visual points moved according to the target and were distributed symmetrically in the Y axis. And whether the target moved vertically or horizontally, the kurtosis of the distribution became equal in each axis.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-11-22
23巻
1号
開始ページ 1
終了ページ 12
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307354
JaLCDOI 10.18926/15456
フルテキストURL Mem_Fac_Eng_OU_28_2_21.pdf
著者 山本 恭二| Jiao Xuezhen|
抄録 An experimental investigation has been made of the cyclone dust collector with a perforated internal rotating cylinder. The size of the rotating cylinder is of 0.5D, where D is the diameter of the cyclone body, and is the same size as the outlet tube. The dust collection efficiency as well as the pressure loss has been measured when the inlet flow speed is 9 ~ 21 m/s and the rotating speed of the cylinder is 37 ~ 63 m/s. The velocity and pressure distributions were also measured. It is found that the collection efficiency decreases and the pressure loss increases as the rotating speed increases. It is also shown that both the inward radial velocity and the upward vertical velocity become large as the rotating cylinder increases its speed. As a whole, the rotation of the internal cylinder makes worse performance of the cyclone dust collector.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 21
終了ページ 31
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307575
JaLCDOI 10.18926/15458
フルテキストURL Mem_Fac_Eng_OU_28_2_33.pdf
著者 Wang, Ming| Ahmed, Anis| 和田 修己| 古賀 隆治|
抄録 Proposed here is a convenient optical system to collimate the crescent shaped blue laser beam radiated from a Cerenkov SHG in channel waveguide configuration. This collimation system is consisted of a parabolic mirror and has a very large tolerance to the mirror displacement. The anisotropy of the nonlinear crystal on which the waveguide is fabricated has been taken into account. The optimum mirror location is given to obtain a collimated blue laser beam with an aberration less than 0.07λ. By using an objective lens, the collimated beam can be focused down to a thin beam with the spot size less than 1μm.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 33
終了ページ 44
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307149
JaLCDOI 10.18926/15461
フルテキストURL Mem_Fac_Eng_OU_28_2_53.pdf
著者 東辻 千枝子| Matsubara Takeo| Miyata Satoru|
抄録 One of the best known solid solution of perovskites is the PbTiO(3)-PbZrO(3) system which is usually abbreviated as PZT. In the phase diagram of this system, there is a drastic phase change from tetragonal to rhombohedral at the molar ratio around 50:50. The PZT crystals are widely used as a practical piezoelectric material because of its very strong piezoelectric effect near this morphotropic phase boundary. We try to explain this anomaly in piezoelectric constant by a phenomenological theory.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 53
終了ページ 58
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307223
JaLCDOI 10.18926/15467
フルテキストURL Mem_Fac_Eng_OU_23_1_61.pdf
著者 山本 尚武| 山本 辰馬|
抄録 Skin impedance satisfies the Cole-Cole arc's law. The change of skin impedance during GSR (Galvanic Skin Reflex) can be expressed by the change of equivalent parallel resistance approximately. Using these characteristics, the complicated change of skin impedance during GSR can be determined continuously from the measurement value in one frequency point.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-11-22
23巻
1号
開始ページ 61
終了ページ 68
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307322
JaLCDOI 10.18926/15468
フルテキストURL Mem_Fac_Eng_OU_23_1_69.pdf
著者 東辻 浩夫| Takei Makoto|
抄録 The statistical properties of two-dimensional systems of charges in semiconductor superlattices are analyzed and the dispersion relation of the plasma oscillation is calculated. The possibility to excite these oscillations by applying the electric field parallel to the structure is discussed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-11-22
23巻
1号
開始ページ 69
終了ページ 82
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307988
JaLCDOI 10.18926/15469
フルテキストURL Mem_Fac_Eng_OU_23_2_1.pdf
著者 Kamiyabu, Hideto| 榊原 精| Maeda, Hironobu| 飛田 守孝|
抄録 Surface tension (γ(L)) and contact angle (θ) of gallium related to wettability on Teflon and other substrates (Al(2)O(3), SiO(2), glass, graphite, BN, AI, Ni, As etc.) were investigated. The values of Teflon were 0.70(6)N/m and 158° in pure argon atmosphere, and the ones of other substrates were listed in a table in this text. We were interested especially in the relative values, γ(L)'s, on the substrates as compared with γ(L) on Teflon substrate. Liquid Ga showed spreading wetting on pure Ni metal and adhesional wetting on Al (supposed to be covered by A1(2)O(3)) and on metallic polycrystal As. Surface tension of Ga was remarkably decreased by a kind of oxide contamination due to oxygen in air. The surface layer coated by the contamination was of amorphous state nearly same as liquid Ga. The amorphous coat caused liquid Ga rather high supercooling of △T~35K. It seems that the contamination layer (oxide fi1m) smeared the crystal nucleation sites on the free surface of liquid Ga
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 1
終了ページ 8
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307294
JaLCDOI 10.18926/15470
フルテキストURL Mem_Fac_Eng_OU_24_1_13.pdf
著者 Uno, Yoshiyuki| Nakajima, Toshikatsu| Endo, Osamu|
抄録 The generation mechanism of crater in electrical discharge machining is analyzed with a single pulse discharge device for alloy tool steel, black alumina ceramics, cermet and cemented carbide, investigating the gap voltage, the discharge current, the shape of crater, the wear of electrode and so on. The experimental analysis makes it clear that the shape of crater has a characteristic feature for the kind of workpiece. The shape of electrode, which changes with the wear by an electric spark, has a significant effect on the shape of crater. The diameter and the depth of crater have a close relation to the discharge energy for alloy tool steel, black alumina ceramics and cermet, while those for cemented carbide are related to the discharge current. The shape factor which is the ratio of the depth to the diameter of crater is different for the work material.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 13
終了ページ 24
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307269
JaLCDOI 10.18926/15471
フルテキストURL Mem_Fac_Eng_OU_24_1_25.pdf
著者 梶原 康博| 大崎 紘一|
抄録 An expert system, in which preconditions and rules are expressed in logical formulas, is developed to support the scheduling of an automated job shop type multi-item assembly line. This system has the foIIowing characteristics to apply any case of schedulings: (1)Forward scheduling orbackward scheduling can be made. (2)The criterion on the input order of products, the dispatching process at each assembly station, and the selection of products from a buffer can be selected from several priority criteria. (3)Layout, number and velocity of vehicles, and the capacity of each buffer can be changed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 25
終了ページ 39
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307454
JaLCDOI 10.18926/15472
フルテキストURL Mem_Fac_Eng_OU_23_2_9.pdf
著者 Kuroda Tsutomu| 大崎 紘一| 松田 正明| Fujisawa Keita|
抄録 Multi-item flexible manufacturing systems have been spread to correspond the short life-cycle and the diversification of products. Part handling plays an important role to operate multi-functional robot efficiently in these systems, and many jigs are widely used to hold a part. They should be exchanged at once according to changing products. In this paper, we propose a pin jig which holds a part with two pins, and design method of the position, length and diameter of those pins for a cylindrical part. This jig has the following characteristics. As a surface of the jig is inclined to use gravity, the part can be fixed without any external forces. Therefore the structure of jig becomes simple, and loading and unloading of a part becomes easy for a robot hand.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 9
終了ページ 19
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307693
JaLCDOI 10.18926/15475
フルテキストURL Mem_Fac_Eng_OU_23_2_21.pdf
著者 Myojin Sho| Yamada Masahito| Fujii Naoto|
抄録 Diversion model and disaggregate behavioral model of logit type are adopted as aggregate and disaggregate estimates, respectively. Diversion model is assumed as a binary choice process including diversion ratio function at each step in the process. Diversion ratio is assumed as a function of generalized-travel-time ratio. The function is identified with each of the two steps of diversion; diverson from rail and bus to car at first and from the rest undiverted to bus at second. The data used are those on inter-regional occupational person trips. Each function are found enough and/or critically significant in the statistical sense. At the begginning, sixteen characteristics variables are enrolled in disaggregate model, which are identified by use of the above data. Six variables are reached finally and are all reasonable. A brief comparison of goodness of fit to the data are made between two models.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 21
終了ページ 32
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307168
JaLCDOI 10.18926/15477
フルテキストURL Mem_Fac_Eng_OU_23_2_33.pdf
著者 Ishihara Yuji| 山本 恭二|
抄録 This paper deals with the low Mach numbers flow of a rarefied vapour past a liquid sphere accompanied with condensation and evaporation at its surface. The linearized Bhatnager-Gross-Krook(B-G-K} equation is used for the analysis, and from it the integral equations of the density, temperature and flow velocities are derived. These integral equations are solved numerically over a wide range of the Knudsen number covering from the slip flow to the nearly free molecular flow. The drag on the sphere is also calculated and is compared with that of previous work.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 33
終了ページ 44
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307401
JaLCDOI 10.18926/15478
フルテキストURL Mem_Fac_Eng_OU_23_2_45.pdf
著者 谷口 健男| Fujiwara, Kohji|
抄録 This paper includes a solver for a large sparse set of linear algebraic equations which are obtained by the application of the finite element method to static structural problems. Proposed method is a modification of Robust Incomplete Choleski-Conjugate Gradient Method, which belongs to Preconditioned Conjugate Gradient Method suitable for supercomputers. Through a number of numerical experiments the authors show that Robust Incomplete Choleski-Conjugate Gradient Method sometimes fails in to obtain the solutions, secondly they clarify the reason of the failures from the theoretical viewpoint, and finally they propose a modification of the robust method by the introduction of the theoretical result. Proposed method is as effective as the original, and it can overcome the demerit of Robust Method which is clarified through numerical experiments.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 45
終了ページ 55
ISSN 0475-0071
言語 Japanese
論文のバージョン publisher
NAID 120002307820
JaLCDOI 10.18926/15480
フルテキストURL Mem_Fac_Eng_OU_25_1_1.pdf
著者 Gao Hong| 和田 力| 則次 俊郎|
抄録 How to reduce and simplify the calculation for image recognition is a very attractive and important issue in order to realize the real time control of a robot based on the image recognition results. This paper describes a method of extracting 2 - dimensional geometrical features of cubic objects based on the normal vector distributions from the visual information obtained with the laser range finder to reduce the calculation of the image recognition. In this research a laser beam is scanned in the horizontal plane to which the cubic objects stand vertically and the laser spot is detected with a TV camera every sampling time. These spots make an intermittent locus which includes some special lines corresponding to the cubic objects. To extract the features of the cubic objects, we utilize the normal vectors formed on the locus. If some normal vectors distribute in the same direction and the origin of the normal vectors are very close to their neighbor's, these normal vectors can be classified into the same class, -the straight line class. Because the normal vectors on the neighbor surfaces of the cubic objects are vertical to each other, we use this property to determine the pair of straight lines which belong to the cubic objects. Making the histogram based on the normal vectors with the same direction, we obtain the peaks which are supported by the points on the cubic object surfaces. Then, the points can be extracted from the set of points on the whole locus inversely according to the relations with the peaks and the features of the cubic object can be extracted by applying method of least square to these extracted points. The experiments proved the availability of the proposed processing algorithm.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 1
終了ページ 13
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308010
JaLCDOI 10.18926/15481
フルテキストURL Mem_Fac_Eng_OU_24_1_81.pdf
著者 和田 修己|
抄録 Are calculated the radiation characteristics of two types of primary-feed waveguides of millimeter wave quasi-optical antennas, which transform circular TE(On) mode into a linearly polarized beam. These antennas are utilized for heating and diagnostics of fusion plasma. Analysis is based on the Huygens-Fresnel principle, which takes the diffraction effect into account. For Convenience in analysis, a feed waveguide is divided into two sections, an uniform waveguide section and a visor section. Assuming that the diameter of the waveguide is several times as large as the wavelength and that the structure of the visor is open, the radiation field is approximated by superposition of direct radiation, and first and second reflection on the visor. Numerical results are presented and compared with experimental results. In these types of waveguides, the shadow section on the visor has a great influence on the radiation field. The results of calculation show that the length of the visor should be longer than that obtained by the geometrical optics, and the longer visor reduces the side-lobe level in the direction of the waveguide axis. The results agree well with those in experiments.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 81
終了ページ 92
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307974
JaLCDOI 10.18926/15482
フルテキストURL Mem_Fac_Eng_OU_24_1_93.pdf
著者 東辻 浩夫| 畑谷 光輝|
抄録 Propagation of charged carriers in semiconductor superlattices is analyzed on the basis of the effective mass approximation with appropriate boundary conditions at heterojunctions taken into account. Applying the finite element method, clarified are the effects of details of the potential profile, such as linear and smooth gradings and random fluctuations, on characteristics of superlattices which are expected to work as collector barriers and energy filters in electronic devices.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 93
終了ページ 105
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307513
JaLCDOI 10.18926/15484
フルテキストURL Mem_Fac_Eng_OU_25_1_15.pdf
著者 榊原 精| Kanadani, Teruto|
抄録 Aging of Al-lmass % Ag alloy at 273K after quenching under various conditions was studied by measurement of electrical resistivity. Scattering of the quasi-equilibrium value of resistivity (p(e)) was not random but closely related to the as-quenched value (p(o)); P(e) increased with increasing p(o)' When the quenching temperature (T(q)) was lower than or equal to 773K, the state at p(e) was controlled substantially by the concentration of quenched vacancy. On the other hand, when T(q)>823K, GP zones formed during quenching played an important role, instead of quenched vacancies, in determining the state.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 15
終了ページ 21
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307255
JaLCDOI 10.18926/15485
フルテキストURL Mem_Fac_Eng_OU_24_1_115.pdf
著者 阿部 宏史| Nogata Mikio|
抄録 The rapid economic growth of Japan in the postwar period has brought about the over-concentration of activities in a few large cities, and local regions have been losing their economic vitality due to the regional differentials and the population loss. Regional development planning in Japan has sought to achieve a balanced growth of the nation through the development of industries in local regions. This paper aims to examine the regional structure of manufacturing industries in the postwar period and to identify its current problems. Three methods, namely the analysis of coefficient of variation, the rateshare analysis and the shift-share analysis are applied using employment data of manufacturing industries for the years 1955 to 1985. Findings show that while the employment of manufacturing industries has been markedly decentralized from metropolitan to local regions, the disparities in growth rates still exist among regions.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 115
終了ページ 133
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307659
JaLCDOI 10.18926/15381
フルテキストURL Mem_Fac_Eng_OU_30_1_75.pdf
著者 東辻 浩夫| 井上 嘉彦| 岸本 篤也| 東辻 千枝子| 奈良 重俊|
抄録 Molecular dynamics of the Yukawa system, the system of particles interacting via the Yukawa or the screened Coulomb potential, are formulated for various statistical ensembles and external conditions. The Yukawa potential smoothly interpolates the long-range Coulomb and the short-range interactions by adjusting a single parameter, the screening length. In order to reduce the effect of boundaries, the periodic boundary conditions are imposed and the deformations of the fundamental vectors of periodicity are taken into account. Ewald-type expressions for interaction energy, force, and kinematic pressure are given explicitly.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1995-12-28
30巻
1号
開始ページ 75
終了ページ 87
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307479