JaLCDOI 10.18926/15441
フルテキストURL Mem_Fac_Eng_OU_26_2_93.pdf
著者 福山 淳| Kasai Takashi| 古谷 洋一郎|
抄録 A one-dimensional tokamak transport code (TASK/TR) has been developed to analyze the evolution of a burning plasma accompanied with fusion reaction. This code deals with the electrons, deuterons, tritons, thermalized α particles, fast α particles and beam ions, separately, in order to describe the dependence of the reaction rate on the ion mixture ratio. As an energy transport model, the drift wave turbulence mode is employed. The heating and current drive by the neutral beam injection as well as the pellet injection for fuelling are also included. This code is applied to a reactor-grade plasma aimed at in the ITER project. The cases of an ignited plasma and a current-driven plasma are examined. The required power for full current drive is estimated. The effect of pellet injection, both fuel and impurity ions, is also studied.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1992-03-28
26巻
2号
開始ページ 93
終了ページ 109
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307699
JaLCDOI 10.18926/15444
フルテキストURL Mem_Fac_Eng_OU_26_2_129.pdf
著者 東辻 浩夫|
抄録 The spectrum of Schottky noise in ion storage rings is analyzed as density fluctuations in effectively one-dimensional plasmas. Strong coupling effects in these plasmas are discussed in relation to experimental observations.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1992-03-28
26巻
2号
開始ページ 129
終了ページ 138
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307668
JaLCDOI 10.18926/15445
フルテキストURL Mem_Fac_Eng_OU_26_2_139.pdf
著者 廣瀬 壮一|
抄録 Scattering problems by a penny-shaped crack are solved using a time-domain boundary integral equation method, The crack is located in an infinite homogeneous, isotropic, linearly elastic solid, and is subjected to an oblique incident wave of either P-, SV-, or SH-wave, The hypersingular integral equation is solved to obtain near-field solutions as well as scattered far-fields. The accuracy of the present method is confirmed by comparing the near-field solutions for different arrangement of elements, Scattered far-fields are calculated for various incident waves, and their usefulness in quantitative non-destructive evaluation is discussed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1992-03-28
26巻
2号
開始ページ 139
終了ページ 150
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307492
JaLCDOI 10.18926/15447
フルテキストURL Mem_Fac_Eng_OU_28_1_129.pdf
著者 谷口 健男| 廣瀬 壮一| Ouchterlony Finn| Nakagawa Kohji| Miyaji Akihiko| Fukuoka Yasufumi|
抄録 The testing method of rock toughness is proposed by the international society of rock mechanics (ISRM), but the results may be influenced by the test pieces, and the details of the crack propagation and the stress intensity factors are not clarified through the testing. Also the experimental test requires tedious works for the preparation of test specimen and economical responsibility. The present study aims to simulate numerically the rock toughness testing which is proposed by ISRM. For this purpose, the authors propose a numerical method which can simulate the experimental testing, and they show the propriety of the proposed method by comparing the results with the experimental and other numerical methods. At the same time, they clarify the details of crack propagation behaviors in rocks, and show the change of the stress intensity factors. The proposed method is based on the displacement-type finite element method, and several techniques are introduced to obtain accurate solution of the mechanical behavior near the crack-tip area.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1993-11-30
28巻
1号
開始ページ 129
終了ページ 138
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307126
JaLCDOI 10.18926/15449
フルテキストURL Mem_Fac_Eng_OU_22_15.pdf
著者 古谷 洋一郎| 東辻 浩夫| Komaki Kunitaka| Tanabe Masahiro|
抄録 An effective potential of an isolated partially ionized high-Z ion, calculated within the framework of the statistical models of atoms, is injected into the one-electron Schrödinger equation, in view of evaluating the electron density and comparing it with the results of statistical models. Starting from this initial value, a self-consistent electron density is obtained on the basis of the density functional theory, where quantum natures of electrons are fully taken into account.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-03-31
22巻
開始ページ 15
終了ページ 34
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307361
JaLCDOI 10.18926/15450
フルテキストURL Mem_Fac_Eng_OU_22_35.pdf
著者 東辻 浩夫|
抄録 Several methods to derive thermodynamic sum rules for a system including charged particle are proposed and applied to charged mixtures as well as one-component systems. The validity of the statements is examined carefully with respect to the ordering in the powers of the wave number. As for the mixture of electrons and ions, it is shown how the aspect of the one-component plasma or the ionic mixture appears when electrons become strongly degenerate.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-03-31
22巻
開始ページ 35
終了ページ 44
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307661
JaLCDOI 10.18926/15452
フルテキストURL Mem_Fac_Eng_OU_28_2_9.pdf
著者 榊原 精| Kanadani, Teruto| Nakagawa, K.| Yokota, Y.|
抄録 The state above the solubility temperature of GP zones of Al-3mass % Mg alloy, which has a tendency for precipitation and preprecipitation at low temperature, was studied by resistivity measurement. Homogenization treatment at high temperature reduced Mg atoms in the surface layer. After quenching from 623K, the specimen was annealed sequentially at various temperatures above the GP zone solvus. The stationary resistivity obtained in annealing at a temperature was the same irrespective of the starting state and increased with decreasing annealing temperature. No precipitation was observed in the annealing. The results are not in favor of the segregation of Mg atoms to the dislocation loops but of the short range clustering.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 9
終了ページ 12
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307581
JaLCDOI 10.18926/15454
フルテキストURL Mem_Fac_Eng_OU_22_63.pdf
著者 Myojin Syo| Kishino Keiichi| Yamada Masahito|
抄録 The paper is a case study mode choice in interregional occupational person trips. Disagregate behavioral model of logit type is applied to the occupational person trips from Tsuyama area in Okayama Prefecture to Osaka area. The model turned out to give asignificant explanation of the interregional mode choice characteristics. Travel time, travelling expenses and " with or wi thout heavy baggage " were found to be significant.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-03-31
22巻
開始ページ 63
終了ページ 70
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307421
JaLCDOI 10.18926/15455
フルテキストURL Mem_Fac_Eng_OU_23_1_1.pdf
著者 松田 正明| 大崎 紘一|
抄録 Display equipment has been used as communication media in the factory, office, and home. In order to communicate effectively, it is necessary to clarify the characteristics of eye movement in the case of looking at the display. The development of Eye Camera enables us to measure eye movement during work, so that we can collect the many data of eye movement during work. In this study, we proposed a method to evaluate the visual work using the distribution of visual points in X and Y axis. The cumulative distribution is approximated by the logistic curve which shows the symmetry and kurtosis by the parameter. The proposed method was applied to the three typical display models, that is, the digital meter model, reading model, and game model. In the digital meter model, the visual points were distributed symmetrically along the meters, and the symmetry and kurtosis of the distribution varied by the arranged direction of the meter. In the reading model, the visual points were distributed nearly symmetrically and uniformly in each axis and they were moved around the character and line from the period of spectrum analysis. In the game model, the visual points moved according to the target and were distributed symmetrically in the Y axis. And whether the target moved vertically or horizontally, the kurtosis of the distribution became equal in each axis.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-11-22
23巻
1号
開始ページ 1
終了ページ 12
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307354
JaLCDOI 10.18926/15456
フルテキストURL Mem_Fac_Eng_OU_28_2_21.pdf
著者 山本 恭二| Jiao Xuezhen|
抄録 An experimental investigation has been made of the cyclone dust collector with a perforated internal rotating cylinder. The size of the rotating cylinder is of 0.5D, where D is the diameter of the cyclone body, and is the same size as the outlet tube. The dust collection efficiency as well as the pressure loss has been measured when the inlet flow speed is 9 ~ 21 m/s and the rotating speed of the cylinder is 37 ~ 63 m/s. The velocity and pressure distributions were also measured. It is found that the collection efficiency decreases and the pressure loss increases as the rotating speed increases. It is also shown that both the inward radial velocity and the upward vertical velocity become large as the rotating cylinder increases its speed. As a whole, the rotation of the internal cylinder makes worse performance of the cyclone dust collector.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 21
終了ページ 31
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307575
JaLCDOI 10.18926/15458
フルテキストURL Mem_Fac_Eng_OU_28_2_33.pdf
著者 Wang, Ming| Ahmed, Anis| 和田 修己| 古賀 隆治|
抄録 Proposed here is a convenient optical system to collimate the crescent shaped blue laser beam radiated from a Cerenkov SHG in channel waveguide configuration. This collimation system is consisted of a parabolic mirror and has a very large tolerance to the mirror displacement. The anisotropy of the nonlinear crystal on which the waveguide is fabricated has been taken into account. The optimum mirror location is given to obtain a collimated blue laser beam with an aberration less than 0.07λ. By using an objective lens, the collimated beam can be focused down to a thin beam with the spot size less than 1μm.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 33
終了ページ 44
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307149
JaLCDOI 10.18926/15461
フルテキストURL Mem_Fac_Eng_OU_28_2_53.pdf
著者 東辻 千枝子| Matsubara Takeo| Miyata Satoru|
抄録 One of the best known solid solution of perovskites is the PbTiO(3)-PbZrO(3) system which is usually abbreviated as PZT. In the phase diagram of this system, there is a drastic phase change from tetragonal to rhombohedral at the molar ratio around 50:50. The PZT crystals are widely used as a practical piezoelectric material because of its very strong piezoelectric effect near this morphotropic phase boundary. We try to explain this anomaly in piezoelectric constant by a phenomenological theory.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1994-03-15
28巻
2号
開始ページ 53
終了ページ 58
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307223
JaLCDOI 10.18926/15467
フルテキストURL Mem_Fac_Eng_OU_23_1_61.pdf
著者 山本 尚武| 山本 辰馬|
抄録 Skin impedance satisfies the Cole-Cole arc's law. The change of skin impedance during GSR (Galvanic Skin Reflex) can be expressed by the change of equivalent parallel resistance approximately. Using these characteristics, the complicated change of skin impedance during GSR can be determined continuously from the measurement value in one frequency point.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-11-22
23巻
1号
開始ページ 61
終了ページ 68
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307322
JaLCDOI 10.18926/15468
フルテキストURL Mem_Fac_Eng_OU_23_1_69.pdf
著者 東辻 浩夫| Takei Makoto|
抄録 The statistical properties of two-dimensional systems of charges in semiconductor superlattices are analyzed and the dispersion relation of the plasma oscillation is calculated. The possibility to excite these oscillations by applying the electric field parallel to the structure is discussed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1988-11-22
23巻
1号
開始ページ 69
終了ページ 82
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307988
JaLCDOI 10.18926/15469
フルテキストURL Mem_Fac_Eng_OU_23_2_1.pdf
著者 Kamiyabu, Hideto| 榊原 精| Maeda, Hironobu| 飛田 守孝|
抄録 Surface tension (γ(L)) and contact angle (θ) of gallium related to wettability on Teflon and other substrates (Al(2)O(3), SiO(2), glass, graphite, BN, AI, Ni, As etc.) were investigated. The values of Teflon were 0.70(6)N/m and 158° in pure argon atmosphere, and the ones of other substrates were listed in a table in this text. We were interested especially in the relative values, γ(L)'s, on the substrates as compared with γ(L) on Teflon substrate. Liquid Ga showed spreading wetting on pure Ni metal and adhesional wetting on Al (supposed to be covered by A1(2)O(3)) and on metallic polycrystal As. Surface tension of Ga was remarkably decreased by a kind of oxide contamination due to oxygen in air. The surface layer coated by the contamination was of amorphous state nearly same as liquid Ga. The amorphous coat caused liquid Ga rather high supercooling of △T~35K. It seems that the contamination layer (oxide fi1m) smeared the crystal nucleation sites on the free surface of liquid Ga
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 1
終了ページ 8
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307294
JaLCDOI 10.18926/15470
フルテキストURL Mem_Fac_Eng_OU_24_1_13.pdf
著者 Uno, Yoshiyuki| Nakajima, Toshikatsu| Endo, Osamu|
抄録 The generation mechanism of crater in electrical discharge machining is analyzed with a single pulse discharge device for alloy tool steel, black alumina ceramics, cermet and cemented carbide, investigating the gap voltage, the discharge current, the shape of crater, the wear of electrode and so on. The experimental analysis makes it clear that the shape of crater has a characteristic feature for the kind of workpiece. The shape of electrode, which changes with the wear by an electric spark, has a significant effect on the shape of crater. The diameter and the depth of crater have a close relation to the discharge energy for alloy tool steel, black alumina ceramics and cermet, while those for cemented carbide are related to the discharge current. The shape factor which is the ratio of the depth to the diameter of crater is different for the work material.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 13
終了ページ 24
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307269
JaLCDOI 10.18926/15471
フルテキストURL Mem_Fac_Eng_OU_24_1_25.pdf
著者 梶原 康博| 大崎 紘一|
抄録 An expert system, in which preconditions and rules are expressed in logical formulas, is developed to support the scheduling of an automated job shop type multi-item assembly line. This system has the foIIowing characteristics to apply any case of schedulings: (1)Forward scheduling orbackward scheduling can be made. (2)The criterion on the input order of products, the dispatching process at each assembly station, and the selection of products from a buffer can be selected from several priority criteria. (3)Layout, number and velocity of vehicles, and the capacity of each buffer can be changed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 25
終了ページ 39
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307454
JaLCDOI 10.18926/15472
フルテキストURL Mem_Fac_Eng_OU_23_2_9.pdf
著者 Kuroda Tsutomu| 大崎 紘一| 松田 正明| Fujisawa Keita|
抄録 Multi-item flexible manufacturing systems have been spread to correspond the short life-cycle and the diversification of products. Part handling plays an important role to operate multi-functional robot efficiently in these systems, and many jigs are widely used to hold a part. They should be exchanged at once according to changing products. In this paper, we propose a pin jig which holds a part with two pins, and design method of the position, length and diameter of those pins for a cylindrical part. This jig has the following characteristics. As a surface of the jig is inclined to use gravity, the part can be fixed without any external forces. Therefore the structure of jig becomes simple, and loading and unloading of a part becomes easy for a robot hand.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 9
終了ページ 19
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307693
JaLCDOI 10.18926/15475
フルテキストURL Mem_Fac_Eng_OU_23_2_21.pdf
著者 Myojin Sho| Yamada Masahito| Fujii Naoto|
抄録 Diversion model and disaggregate behavioral model of logit type are adopted as aggregate and disaggregate estimates, respectively. Diversion model is assumed as a binary choice process including diversion ratio function at each step in the process. Diversion ratio is assumed as a function of generalized-travel-time ratio. The function is identified with each of the two steps of diversion; diverson from rail and bus to car at first and from the rest undiverted to bus at second. The data used are those on inter-regional occupational person trips. Each function are found enough and/or critically significant in the statistical sense. At the begginning, sixteen characteristics variables are enrolled in disaggregate model, which are identified by use of the above data. Six variables are reached finally and are all reasonable. A brief comparison of goodness of fit to the data are made between two models.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 21
終了ページ 32
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307168
JaLCDOI 10.18926/15381
フルテキストURL Mem_Fac_Eng_OU_30_1_75.pdf
著者 東辻 浩夫| 井上 嘉彦| 岸本 篤也| 東辻 千枝子| 奈良 重俊|
抄録 Molecular dynamics of the Yukawa system, the system of particles interacting via the Yukawa or the screened Coulomb potential, are formulated for various statistical ensembles and external conditions. The Yukawa potential smoothly interpolates the long-range Coulomb and the short-range interactions by adjusting a single parameter, the screening length. In order to reduce the effect of boundaries, the periodic boundary conditions are imposed and the deformations of the fundamental vectors of periodicity are taken into account. Ewald-type expressions for interaction energy, force, and kinematic pressure are given explicitly.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1995-12-28
30巻
1号
開始ページ 75
終了ページ 87
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002307479