| JaLCDOI | 10.18926/15387 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_30_2_9.pdf |
| 著者 | 榊原 精| Kanadani, Teruto| |
| 抄録 | Fatigue strength of Al-Cu alloy was examined by a repeated tensile mode when the specimens were aged and reversion annealed. The specimen quenched from 723K and aged fully around room temperature showed fatigue strength which depended on the existence of soft layer, while the specimen quenched from 723K and aged in the same way showed fatigue strength independent of the existence of the soft layer. Fatigue strength of the specimen, of which the soft surface layer was removed, was the same for either quenching temperature. Fatigue strength became higher when the soft surface layer was thickened with reversion annealing for 600s at 323K after aging. The soft surface layer was thought to increase fatigue strength of the aged Al-Cu alloy as well as Al-Zn alloy. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1996-03-29 |
| 巻 | 30巻 |
| 号 | 2号 |
| 開始ページ | 9 |
| 終了ページ | 13 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307694 |
| JaLCDOI | 10.18926/15407 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_26_1_1.pdf |
| 著者 | 榊原 精| Kanadani, Teruto| |
| 抄録 | Reversion of the age-hardened Al-15mass % Zn alloy, in which ellipsoidal GP zones were formed, was investigated by hardness test. Ellipsoidal zones were reverted more quickly near the surface and grain boundary than in the interior, as spherical zones did. The results confirm their role as sources for vacancies in reversion. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1991-11-30 |
| 巻 | 26巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 7 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002308003 |
| JaLCDOI | 10.18926/15356 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_34_13.pdf |
| 著者 | 榊原 精| Tanimoto, Tadashi| Matsushima, Takahisa| Hosokawa, Norio| Kanadani, Teruto| |
| 抄録 | Repeated tensile fatigue strength of the low temperature age-hardened Al-Zn alloys is investigated varying the specimen thickness. Fatigue strength of the age-hardened specimens decreases with the specimen thickness when the specimen is thinner than a certain thickness, whereas fatigue strength of non age-hardened specimens, i.e., pure aluminum and dilute Al-Zn alloy, does not depend the specimen thickness. The dependence of fatigue strength on the thickness of age-hardened specimen is considered to be caused by the decrease of the strength of specimen as a whole, as a result of increase in volume ratio of the soft surface layer formed after age-hardening with decreasing specimen thickness. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2000-03-27 |
| 巻 | 34巻 |
| 号 | 1-2号 |
| 開始ページ | 13 |
| 終了ページ | 17 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307815 |
| JaLCDOI | 10.18926/19604 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_33_1_1.pdf |
| 著者 | 榊原 精| Kanadani, Teruto| |
| 抄録 | Aging of diolute Al-Ag alloys after quenching from low temperatures were studied mainly by electrical resistometry. Maximum resistivity observed in the aging curve of specimens quenched from high temeperature disappeared when the quenching temperature was lowered to 473 or 453K. When the quenching temperature was lowered further to 423K or lower, however, maximum resistivity reappeared. At the temperature lower than or equal to 423K but higher than the GP zone solvus, the alloys were not homogeneous but had clusters of solute atoms or fluctuation of solute concentration. Inhomogeneous distribution of solute atoms may affect the aging behavior after quenching from that temperature. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1998-11-30 |
| 巻 | 33巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 4 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002309092 |
| JaLCDOI | 10.18926/15484 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_25_1_15.pdf |
| 著者 | 榊原 精| Kanadani, Teruto| |
| 抄録 | Aging of Al-lmass % Ag alloy at 273K after quenching under various conditions was studied by measurement of electrical resistivity. Scattering of the quasi-equilibrium value of resistivity (p(e)) was not random but closely related to the as-quenched value (p(o)); P(e) increased with increasing p(o)' When the quenching temperature (T(q)) was lower than or equal to 773K, the state at p(e) was controlled substantially by the concentration of quenched vacancy. On the other hand, when T(q)>823K, GP zones formed during quenching played an important role, instead of quenched vacancies, in determining the state. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1990-12-14 |
| 巻 | 25巻 |
| 号 | 1号 |
| 開始ページ | 15 |
| 終了ページ | 21 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307255 |
| JaLCDOI | 10.18926/47021 |
|---|---|
| フルテキストURL | mfe_36_2_001_006.pdf |
| 著者 | Sakakibara, Akira| Kanadani, Teruto| Tashiro, Tsutomu| Yoshioka, Kazumi| |
| 抄録 | The effect of heat-treatment conditions on occurrence of serration in Al-Zn alloys was investigated. Specimens were aged for various times up to 2.6Ms at 293K or 273K after quenching from various temperatures (T(Q)), 473K to 853K, and tensile-tested at room temperature. Serration occurred more easily according as T(Q) became lower and the aging time became shorter: in the case that T(Q)=473K serration was observed even after aging for 2.6Ms, while in the case that T(Q)=773K serration did not occur irrespective of aging conditions. Serration was also recognized when the specimens were furnace-cooled from 773K to room temperature. These results together with those obtained by the electrical resistometry suggest that the serration in the low'concentrated Al-Zn alloy is caused by the formation of small GP zones whose Guinier radius is less than 1nm or some sort of solute clusters. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2002-03 |
| 巻 | 36巻 |
| 号 | 2号 |
| 開始ページ | 1 |
| 終了ページ | 6 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 80015497758 |
| JaLCDOI | 10.18926/15428 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_29_2_83.pdf |
| 著者 | 都留 寛治| Nishiyama Chikako| 大槻 主税| 尾坂 明義| |
| 抄録 | One of the CaO,SiO(2)-based bioactive glasses(5OCaO･ 5OSiO (2) in mol%) were soaked for various periods in a simulated body fluid(SBF) with or without containing alcohols such as methanol, ethanol, and 1-propanol. Effect of the alcohols was investigated on the apatite formation on the glass surface with thin-film X-ray diffraction, FT-IR reflection spectroscopy and scanning electron microscopy. Under the presence of alcohols up to 0.1mol/l in the SBF an apatite layer was formed on the glass, while it consisted of crystallites similar in morphology but larger in size than that found for the SBF without the alcohols. It was concluded that the alcohols little influenced the the apatite forming ability of the CaO,SiO(2)-based glasses. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1995-03-27 |
| 巻 | 29巻 |
| 号 | 2号 |
| 開始ページ | 83 |
| 終了ページ | 88 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307301 |
| JaLCDOI | 10.18926/19961 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_44_69.pdf |
| 著者 | Nekado, Kenta| Kato, Hidehiro| Nogami, Yasuyuki| Morikawa, Yoshitaka| |
| 抄録 | Recently, pairing–based cryptographies have attracted much attention. For fast pairing calculation, not only pairing algorithms but also arithmetic operations in extension field should be efficient. Especially for final exponentiation included in pairing calculation, squaring is more important than multiplication. This paper proposes an efficient squaring algorithm in extension field for Freeman curve. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2010-01 |
| 巻 | 44巻 |
| 開始ページ | 69 |
| 終了ページ | 72 |
| ISSN | 1349-6115 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002309070 |
| JaLCDOI | 10.18926/46950 |
|---|---|
| フルテキストURL | mfe_38_1-2_033_037.pdf |
| 著者 | Liman, M. Sanusi| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo| |
| 抄録 | The dynamic structure factor and the spectrum of the momentum-density fluctuations of 2D Yukawa liquids are analyzed in the domain of weak and intermediate coupling and screenlng parameters. The dispersion relations of the longitudinal and transverse collective excitations are obtained and compared with the random phase approximation (RPA) and harmonic approximation for triangular lattice. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 33 |
| 終了ページ | 37 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 80016863329 |
| JaLCDOI | 10.18926/15442 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_28_1_87.pdf |
| 著者 | Motojima Isao| 河野 伊一郎| 西垣 誠| |
| 抄録 | In recent years, construction or planning of large-scale underground structures, such as underground power plants, underground oil storage plants and nuclear power plants have been coming into consideration in Japan. To construct such as large-scale underground structures, one of the most important problems is to make clear beforehand the behavior of groundwater around these structures and the other is to carry out proper countermeasure of groundwater, so that these structures can be constructed safely and maintained stability over a long time period. This report describes the results of theoretical studies on the drain systems and at the same time, discusses the drain systems around the underground cavern for the practical underground power stations. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-11-30 |
| 巻 | 28巻 |
| 号 | 1号 |
| 開始ページ | 87 |
| 終了ページ | 128 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307220 |
| JaLCDOI | 10.18926/14121 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_40_1_40.pdf |
| 著者 | 三宅 隆| 東辻 千枝子| 鶴田 健二| 東辻 浩夫| |
| 抄録 | The electron system of arbitrary degeneracy can be mapped onto a classical system where electrons of the same spin are assigned an additional interaction and the effect of degeneracy is taken into account through an imaginative temperature. We apply this method to electrons in quantum dots modeled as two-dimensional electron liquid confined in a finite domain by a harmonic potential. We analyze distribution functions by molecular dynamics instead of solving integral equations which are not so useful in the case without translational invariance. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2006-01 |
| 巻 | 40巻 |
| 号 | 1号 |
| 開始ページ | 40 |
| 終了ページ | 43 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002308268 |
| JaLCDOI | 10.18926/17826 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_43_8.pdf |
| 著者 | Umeda Ryosuke| 東辻 千枝子| 鶴田 健二| 東辻 浩夫| |
| 抄録 | Metamaterial which has negative permittivity and permeability is investigated via computer simulations. Effects of the nanostructure on dielectric and magnetic properties of the material are taken into account by introducing the Drude-Lorentz model in the materials dispersion. We include multi-band process in the dielectric response in order to reproduce accurately experimental values of bulk Au thin film. Size effect on the dispersion is examined by comparing the model with that of a noble metal particle. Based on the dispersion model constructed, we analyze the electromagnetic response of nanostructured metamaterials to evanescent waves at microwave and optical frequencies via finite-difference time-domain simulatioins on parallel computer. A re- focusing and an amplification of the evanescent waves propagating through a metamaterial, consisting of metal slab/vacuum stacking, is demonstrated for the frequencies of 30GHz and 744THz. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2009-01 |
| 巻 | 43巻 |
| 開始ページ | 8 |
| 終了ページ | 15 |
| ISSN | 1349-6115 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002308833 |
| JaLCDOI | 10.18926/15378 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_35_191.pdf |
| 著者 | Yoshida Takanobu| 宗澤 良臣| 大崎 紘一| 梶原 康博| Ohta Kazuharu| |
| 抄録 | We developed the disassembly system that uses the impulsive load and disassembly tools to disassemble used appliances economically. The main components of this system are impulse hammer, a lift table and developed disassembly tools. Several types of disassembly tools are developed to punch out fastened portion on a part and cut off the shaft of screw or connection pin of IC-chip. A simulation model is proposed to explain and formulate how the fastening point of product is broken and cut. Three kinds of disassembly tools are designed. The actual disassembly system is developed by using proposed simulation models and disassembly tools. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2001-03-27 |
| 巻 | 35巻 |
| 号 | 1-2号 |
| 開始ページ | 191 |
| 終了ページ | 196 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307328 |
| JaLCDOI | 10.18926/15385 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_1_1.pdf |
| 著者 | Uno, Yoshiyuki| Kubota, Shin-ichiro| Nakajima, Toshikatsu| Ogata, Kojiro| Tada, Nobuhiko| |
| 抄録 | Direct patterning of copper coated ceramic circuit board is experimentally investigated with Q-switched Nd:YAG laser in order to shorten the time of the trial manufacture of electronic circuit board and to adapt the flexible design change. It is pointed out that the fast direct patterning the speed of which reaches about 100 mm/s is possible if the repetition frequency and the average power are selected properly. Furthermore cutting off and/or drilling of ceramic board are also possible under the condition that the repetition frequency is less than 3kHz. This technique makes it possible the mask1ess patterning of ceramic circuit board which has been widely used recently in place of conventional glass-epoxy or phenolic resin circuit board, and it leads to the shorter time limit of delivery as compared with the conventional end-milling method. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1992-11-25 |
| 巻 | 27巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 10 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307702 |
| JaLCDOI | 10.18926/15269 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_35_47.pdf |
| 著者 | 堂前 行宏| 小西 正躬| 今井 純| Asada, Hideki| Kitamura, Akira| |
| 抄録 | In this paper, an identification method of motor parameters for the diagnosis of rotor bar defects in the squirrel cage induction motor is proposed. It is difficult to distinguish the degree of deterioration by a conventional diagnostic method such as Fourier analysis. To overcome the difficulty, a motor simulator is used to identify the degree of deterioration of rotors in the squirrel cage induction motor. Using this method, the deterioration of rotor bars in the motor can be estimated quantitatively. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2001-03-27 |
| 巻 | 35巻 |
| 号 | 1-2号 |
| 開始ページ | 47 |
| 終了ページ | 51 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307181 |
| JaLCDOI | 10.18926/15371 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_35_163.pdf |
| 著者 | Uchiyama Hiromitsu| Miyazaki Satoshi| 大崎 紘一| 梶原 康博| 宗澤 良臣| Matsuki Katsunori| |
| 抄録 | We develop an assembly robot system for assembling the flexible belt-shaped subject. An image processing method is developed to recognize the belt-shaped subject. This method is able to determine the grasping point and grasping angle for piking up a subject by a multiple hands unit. CAD information is used to determine the grasping point. The multiple hands unit is developed, which is able to grasp all grasping points of a subject at a time. In addition, the image processing method is used to judge whether a subject is fastened accurately at right position or not during the assembly. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2001-03-27 |
| 巻 | 35巻 |
| 号 | 1-2号 |
| 開始ページ | 163 |
| 終了ページ | 168 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307229 |
| JaLCDOI | 10.18926/15380 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_35_197.pdf |
| 著者 | Nogami, Yasuyuki| Morikawa, Yoshitaka| |
| 抄録 | Modern communication engineerings, such as elliptic curve cryptographies, often requires algebra on finite extension field defined by modulus arithmetic with an irreducible polynomial. This paper provides a new method to detemine the minimal (irreducible) polynomial of a given proper element in finite extension field. In the conventional determination method, as we have to solve the simultaneous equations, the computation is very involved. In this paper, the well known "trace" is extended to higher degree traces. Using the new traces, we yield the coefficient formula of the desired minimal polynomial. The new method becomes very simple without solving the simultaneous equations, and about twice faster than the conventional method in computation speed. |
| キーワード | finite field minimal polynomial irreducible polynomial higher degree trace trace cryptography |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2001-03-27 |
| 巻 | 35巻 |
| 号 | 1-2号 |
| 開始ページ | 197 |
| 終了ページ | 205 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307992 |
| JaLCDOI | 10.18926/15498 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_25_1_99.pdf |
| 著者 | 西垣 誠| 竹下 祐二| 河野 伊一郎| |
| 抄録 | In this paper, a numerical procedure of determining hydraulic properties in multilayered aquifers are presented. From pumping test data in multilayered aquifers, the coefficient of permeability and specific storage for each aquifer are determined by using a combination of finite element analysis and nonlinear least-squares optimization technique. This study especially points out necessity of stress-flow coupling analysis to explain the behaviors of pressure head in multilayered aquifer during pumping test. As a example, practical pumping test data were evaluate and the coefficients of permeability and specific storage of aquifers and aquitard were obtained. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1990-12-14 |
| 巻 | 25巻 |
| 号 | 1号 |
| 開始ページ | 99 |
| 終了ページ | 109 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307452 |
| JaLCDOI | 10.18926/15483 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_24_1_107.pdf |
| 著者 | 河野 伊一郎| 西垣 誠| 竹下 祐二| |
| 抄録 | The numerical feasibility of determining soil water retention and hydraulic conductivity functions simultaneously from one-dimensional transient flow experiments in the laboratory by parameter estimation method is evaluated. Soil hydraulic properties are assumed to be represented by van Genuchten's closed-form expressions involving two unknown parameters: coefficients α and n . These parameters are evaluated by nonlinear least-squares fitting of predicted and observed pressure head with time. Gravity drainage experiments are performed for Toyoura standard sand to evaluate the adequacy of this proposed method. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1989-11-29 |
| 巻 | 24巻 |
| 号 | 1号 |
| 開始ページ | 107 |
| 終了ページ | 114 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307749 |
| JaLCDOI | 10.18926/15467 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_23_1_61.pdf |
| 著者 | 山本 尚武| 山本 辰馬| |
| 抄録 | Skin impedance satisfies the Cole-Cole arc's law. The change of skin impedance during GSR (Galvanic Skin Reflex) can be expressed by the change of equivalent parallel resistance approximately. Using these characteristics, the complicated change of skin impedance during GSR can be determined continuously from the measurement value in one frequency point. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1988-11-22 |
| 巻 | 23巻 |
| 号 | 1号 |
| 開始ページ | 61 |
| 終了ページ | 68 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307322 |