| 著者 | Faculty of Engineering, Okayama University| |
|---|---|
| 発行日 | 2002-11 |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 巻 | 37巻 |
| 号 | 1号 |
| 資料タイプ | その他 |
| JaLCDOI | 10.18926/46975 |
|---|---|
| フルテキストURL | mfe_37_2_001_004.pdf |
| 著者 | Sakakibara, Akira| Kanadani, Teruto| |
| 抄録 | Effect of addition of Fe on the occurrence of serration in Al-12mass%Zn alloys was investigated. Specimens aged at 293K for various periods after quenching from various temperatures (T(Q)), 398K to 823K, were tensile-tested at room temperature. Serration occurred more easily and more remarkably with decreasing T(Q) for as-quenched specimens: in the case that T(Q)=448K serration was observed both for the binary and Fe added alloys, while in the case that T(Q)=573K none of the three alloys showed serration. For the binary alloy serration was observed only when the aging period was short enough, but addition of Fe to the binary alloy prolonged the aging period where serration could be recognized. Aging rate measured by hardness was remarkably retarded with the increase of Fe addition. These results confirm the interpretation that the serration in Al-Zn alloy occurs in the early stage of aging where small GP zones or solute clusters are formed. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 1 |
| 終了ページ | 4 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016019142 |
| 著者 | Faculty of Engineering, Okayama University| |
|---|---|
| 発行日 | 2003-03 |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 巻 | 37巻 |
| 号 | 2号 |
| 資料タイプ | その他 |
| 著者 | Faculty of Engineering, Okayama University| |
|---|---|
| 発行日 | 2003-03 |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 巻 | 37巻 |
| 号 | 2号 |
| 資料タイプ | その他 |
| JaLCDOI | 10.18926/46983 |
|---|---|
| フルテキストURL | mfe_37_2_089_097.pdf |
| 著者 | Iokibe, Kengo| Toyota, Yoshitaka| Wada, Osami| Koga, Ryuji| |
| 抄録 | Aerosol extinction coefficients of clouds and dust were continuously measured in the year of 2002 with a polarized Mie-scattering lidar controlled by an automatic and remotely operating system utilizing internet services. Measured cloud extinctions were greater than 1.0 km(-1) below the altitude 6 km, 0.17 - 1.0 km(-1) between 6 and 10 km, and 0.091 - 0.3 km(-1) beyond 10km. Extinction of dust were 0.10 and 0.20 km(-1) for Asian dust and 0.057 km(-1) for urban dust. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 89 |
| 終了ページ | 97 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 120003457336 |
| JaLCDOI | 10.18926/46982 |
|---|---|
| フルテキストURL | mfe_37_2_073_087.pdf |
| 著者 | Nogami, Yasuyuki| Morikawa, Yoshitaka| |
| 抄録 | Public key cryptosystem has many uses, such as to sign digitally, to realize electronic commerce. Especially, RSA public key cryptosystem has been the most widely used, but its key for ensuring sufficient security reaches about 2000 bits long. On the other hand, elliptic curve cryptosystem(ECC) has the same security level with about 7-fold smaller length key. Accordingly, ECC has been received much attention and implemented on various processors even with scarce computation resources. In this paper, we deal with an elliptic curve which is defined over extension field F(p2c) and has a prime order, where p is the characteristic and c is a non negative integer. In order to realize a fast software implementation of ECC adopting such an elliptic curve, a fast implementation method of definition field F(p2c) especially F(p8) is proposed by using a technique called successive extension. First, five fast implementation methods of base field F(p2) are introduced. In each base field implementation, calculation costs of F(p2)-arithmetic operations are evaluated by counting the numbers of F(p)-arithmetic operations. Next, a successive extension method which adopts a polynomial basis and a binomial as the modular polynomial is proposed with comparing to a conventional method. Finally, we choose two prime numbers as the characteristic, and consider several implementations for definition field F(p8) by using five base fields and two successive extension methods. Then, one of these implementations is especially selected and implemented on Toshiba 32-bit micro controller TMP94C251(20MHz) by using C language. By evaluating calculation times with comparing to previous works, we conclude that proposed method can achieve a fast implementation of ECC with a prime order. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 73 |
| 終了ページ | 87 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80015999992 |
| JaLCDOI | 10.18926/46981 |
|---|---|
| フルテキストURL | mfe_37_2_067_072.pdf |
| 著者 | Yamagiwa, Masashi| Sakai, Hiroshi| |
| 抄録 | An active form of Cry4A is a heterodimer of the 20- and 45-kDa fragments that are derived from the 130-kDa Cry4A protoxin. To investigate the function of these two fragments, several deletion mutants were constructed and expressed in E.coli as the GST (glutathione-S-transferase) fusion proteins. The results of the bioassay against Culex pipiens larvae showed that the interaction of two fragments of Cry4A was necessary for the toxicity, and that the C-terminal 67 amino acids of the 20-kDa fragment corresponding to the helices α4 and α5 were involved in determining the insecticidal activity. Surprisingly the lack of helix α5 did not affect the toxicity to C. pipiens, suggesting that the role of helix α5 of Cry4A was different from that postulated in the case of Cry4A toxins. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 67 |
| 終了ページ | 72 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016019143 |
| JaLCDOI | 10.18926/46980 |
|---|---|
| フルテキストURL | mfe_37_2_061_066.pdf |
| 著者 | Vaillancourt, Chico| |
| 抄録 | In this case study, I will analyse and discuss the results of a survey concerning motivation towards learning a second language conducted in one Danish high school. The students surveyed were between the ages of 13-18. This section, part two of the study, was conducted in Copenhagen, Denmark. This region of the world was chosen because bilingualism is quite common there and a large portion of the school-aged community is learning a second language and often a third and even a fourth. Denmark, a European country, is different than Canada (Case Study-Part 1.) because it neighbours many countries, which use different mother tongues. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 61 |
| 終了ページ | 66 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 120003457333 |
| JaLCDOI | 10.18926/46979 |
|---|---|
| フルテキストURL | mfe_37_2_045_060.pdf |
| 著者 | Xu, Wei| Zhao, Y.| Horikane, T.| Hayata, T.| Tosuji, H.| Kagawa, Y.| |
| 抄録 | Resistivity distribution sounding of the non-homogeneous earth is important for electrical ground system design, geophysical prospecting and survey or monitoring the groundwater flow level. The previous paper presented that the direct inversion of the electric resistivity distribution in a domain is possible from the impedance data measured over the domain boundary using the dual reciprocity boundary element modelling in two-dimentional field [1]. The proposed inversion technique is extended to the distribution in three-dimensional space [2]. This technique is capable of inversion without iteration and meshing of the domain. Electric field with spatially varying conductivity is governed by Laplace equation, which is transformed into a Poisson-type expression with an inhomogeneous term involving the conductivity difference as a source term. Dual reciprocity method (DRM) is a technique for transforming the domain integral associated with the inhomogeneous term in Poisson equation into the boundary integral expression. The resistivity distribution in the field can thus be identified from the data observed over its boundary, for which some examples are demonstrated [2]. In this paper, the examination is extended to the case where only the data measured over the single surface is used for the inversion. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 45 |
| 終了ページ | 60 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016037881 |
| JaLCDOI | 10.18926/46978 |
|---|---|
| フルテキストURL | mfe_37_2_029_044.pdf |
| 著者 | Imajo, Shuya| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |
| 抄録 | In hot strip rolling mills, the looper control system is automated. However, the looper's behavior tends to be unstable in threading. Therefore, human expert always intervenes and stabilizes the looper's behavior by tuning PID gains and interposing manipulation variable of looper control system. In this paper, we propose a method based on the recurrent neural network to express PID gains tuning action by human. Furthermore, we propose two methods to update the model by learning. To check the effectiveness of the proposed learning methods, numerical simulation applied to the looper height control is carried out. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 29 |
| 終了ページ | 44 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016037880 |
| JaLCDOI | 10.18926/46977 |
|---|---|
| フルテキストURL | mfe_37_2_013_027.pdf |
| 著者 | Shibuta, Taizo| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |
| 抄録 | Nowadays, various kind of reactor furnaces are widely used for the production in industry. The raw materials charged into the furnace generate reaction heat produced by blowing gas. Generally speaking, the reaction heat generated in the furnace is remarkably high. Therefore the occurrence of an inappropriate temperature distribution in the furnace may make damege or serious accident of the furnace. This is the motivation of furnace control. The author is considering the application of studied results to the furnace control of Blast Furnace in steel industry. To the propose, the approximated and simplified Macro Model of the Blast Furnace is constructed which has the function of representation of qualitative characteristics of the furnace in dynamical sense. The furnace temperature, distribution greatly effects both on the producting and the product quality of the furnace. Needless to say, stable furnace operation is indispensable for the economical prosperity of the industry. In this paper, macro simulation of the furnace is developed to support the analysis and design of the furnace control. Using the simulator, the stability and the control characteristics for inner furnace temperature distribtion are analised quantitatively. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 13 |
| 終了ページ | 27 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80015999991 |
| JaLCDOI | 10.18926/46976 |
|---|---|
| フルテキストURL | mfe_37_2_005_012.pdf |
| 著者 | Abe, Takeji| Sato, Takashi| |
| 抄録 | Cork is a material that has many characteristics, for instance, light weight, elasticity, insulation against heat, impermeability for liquid, and so forth. There are two types of cork, the natural and the agglomerated corks. In the present paper, compression tests of the natural and the agglomerated cork specimens were carried out. The compression test were done in various directions. Compressive stress was measured by a original compression apparatus, and stress-strain curves were obtained in various directions of the cork specimens. In the natural cork, there are differences between the radial and the non-radial direction. The recovery of dimensions after compression was also studied in respective directions. The structure of the deformed surface was observed by a scanning electron microscope. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2003-03 |
| 巻 | 37巻 |
| 号 | 2号 |
| 開始ページ | 5 |
| 終了ページ | 12 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80015999990 |
| JaLCDOI | 10.18926/46955 |
|---|---|
| フルテキストURL | mfe_38_1-2_091_096.pdf |
| 著者 | Kanayama, Naoki| Yamakoshi, Kimi| Kiyomi, Masaaki| Magari, Masaki| Ohmori, Hitoshi| |
| 抄録 | Generally, IgM antibodies (Abs) produced in a primary immune response show lower affinity for an inducing antigen (Ag) compared with the corresponding IgG Abs that are major switched isotypes formed in the secondary response. An IgM molecule is a pentamer with 10 Ag-binding sites that will contribute to an increase of avidity for an Ag. To estimate the contribution of the pentameric structure to the avidity of an IgM Ab, we generated IgM and IgG1 monoclonal Abs (mAbs) with identical V regions that are specific for 4-hydroxy-3-nitrophenylacetyl (NP) by in vitro class switching of B cells followed by the cell fusion with a mouse myeloma cell line. Compared with an anti-NP IgG1 mAb, the corresponding IgM mAb showed much higher avidity for NP-conjugated bovine serum albumin, which was drastically reduced after being dissociated into monomers. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 91 |
| 終了ページ | 96 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80017001822 |
| JaLCDOI | 10.18926/46946 |
|---|---|
| フルテキストURL | mfe_38_1-2_001_004.pdf |
| 著者 | Sakakibara, Akira| Kanadani, Teruto| |
| 抄録 | The relationship between occurrence of serration and reversion heat treatment was studied by tensile test on Al-10mass%Zn alloy. Serration was observed for the furnace cooled specimen, but not for the as-quenched one and the shortly aged one, which result is difficult to be interpreted by the Cottrell theory. The stress amplitude in the serration increased with increasing the time of annealing for reversion up to 10ks and then stayed at a constant value which might be interpreted by the Cottrell theory. The stress amplitude in the serration decreased with increasing the annealing temperature, which is contrary to the prediction by the Cottrell theory. The specimen directly annealed without aging and the one annealed after aging agreed well with each other in the tensile strength and the stress amplitude in the serration, which suggests solute clusters as the cause of serration. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 1 |
| 終了ページ | 4 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016785932 |
| 著者 | Faculty of Engineering, Okayama University| |
|---|---|
| 発行日 | 2004-03 |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 資料タイプ | その他 |
| 著者 | Faculty of Engineering, Okayama University| |
|---|---|
| 発行日 | 2004-03 |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 資料タイプ | その他 |
| JaLCDOI | 10.18926/46947 |
|---|---|
| フルテキストURL | mfe_38_1-2_005_014.pdf |
| 著者 | Ishimaru, Kazuhito| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |
| 抄録 | Temperature distribution in the reactor furnace is mainly operated by gas blowing from multiple tuyeres and material charge distribution. The objective of our research is obtain the optimal profile of gas flow to control temperature distribution in the reactor furnace in the shortest possible time. We formulated the optimization problem to reduce deviation of temperature distribution from its desired one in the reactor furnace. Based on the formulation, gas blow conditions are optimized by a sequential quadratic programming method to realize the desired temperature distribution. The validity of the method was checked through numerical experiments. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 5 |
| 終了ページ | 14 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016785933 |
| JaLCDOI | 10.18926/46948 |
|---|---|
| フルテキストURL | mfe_38_1-2_015_027.pdf |
| 著者 | Torigoe, Takashi| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |
| 抄録 | In these days, mechanical systems are becoming more complex and highly automated. So, there exist wide variety of demands for reliable diagnostic technology. A reliable data analysis and quantitative diagnosis method of mechanical system is necessary for the purpose. In this paper a quantitative diagnosis method for looper height control system has been developed based on neural network technologies. The wavelet transformation is used for pre-processing to analyze characteristics of looper height control system. And, self organizing map neural network is used for the purpose of classification based on the pre-processed data. After that, the classified results are used for quantitative diagnosis in hierarchical neural network. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 15 |
| 終了ページ | 27 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016785934 |
| JaLCDOI | 10.18926/46949 |
|---|---|
| フルテキストURL | mfe_38_1-2_029_032.pdf |
| 著者 | Totsuji, Hiroo| Totsuji, Chieko| Ogawa, Takafumi| Tsuruta, Kenji| |
| 抄録 | The structure of dust particles in dusty plasmas under microgravity has been analyzed by molecular dynamics simulation. The charge neutrality condition satisfied by the system composed of dust particles and ambient plasma is properly taken into account. It is shown that dust particles form shell structures at low temperatures and the number of shells are obtained as a phase diagram in the plane of two parameters characterizing the system: the number of particles and the strength of screening. It is also shown that these structures are almost independent of the strength of screening. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 29 |
| 終了ページ | 32 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016863328 |
| JaLCDOI | 10.18926/46950 |
|---|---|
| フルテキストURL | mfe_38_1-2_033_037.pdf |
| 著者 | Liman, M. Sanusi| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo| |
| 抄録 | The dynamic structure factor and the spectrum of the momentum-density fluctuations of 2D Yukawa liquids are analyzed in the domain of weak and intermediate coupling and screenlng parameters. The dispersion relations of the longitudinal and transverse collective excitations are obtained and compared with the random phase approximation (RPA) and harmonic approximation for triangular lattice. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 2004-03 |
| 巻 | 38巻 |
| 号 | 1-2号 |
| 開始ページ | 33 |
| 終了ページ | 37 |
| ISSN | 0475-0071 |
| 言語 | English |
| 論文のバージョン | publisher |
| NAID | 80016863329 |