JaLCDOI 10.18926/15492
フルテキストURL Mem_Fac_Eng_OU_25_1_59.pdf
著者 河野 伊一郎| 西垣 誠| Okada Junji|
抄録 In this paper, we propose a method to determine the coefficients of permeability of the unconfined aquifer consisted of two different permeability layers. With mixing the conventional pumping test and falling head permeability test, the coefficients of permeabilitiy k(1) and k(2) were obtained. The validity of the proposed method is investigated by using the numerical simulation. As the results, it becomes apparent that the proposed method is applicable to real hydarulic problems.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 59
終了ページ 69
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307472
JaLCDOI 10.18926/15491
フルテキストURL Mem_Fac_Eng_OU_24_2_11.pdf
著者 榊原 精| Kanadani, Teruto|
抄録 Aging behavior of Al-0.23mass % Si alloy was studied by measurements of elecrical resistivity. Resistvity maximum was observed in the aging curves at 273K after quenching from various temperatures. Appearance of maximum and its dependence on the quenching temperature were attributed to the formation of GP zones. Even in a more dilute alloy as 0.01mass % Si, the maximum of resistivity was also recognized.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-03-29
24巻
2号
開始ページ 11
終了ページ 16
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307615
JaLCDOI 10.18926/15490
フルテキストURL Mem_Fac_Eng_OU_25_1_51.pdf
著者 東辻 浩夫|
抄録 The superconductivity proximity effect in the dirty limit is revisited and equations and boundary conditions are obtained for the case of inhomogeneous media with continuously varying characteristic parameters.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 51
終了ページ 57
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307188
JaLCDOI 10.18926/15489
フルテキストURL Mem_Fac_Eng_OU_24_2_1.pdf
著者 Umemoto, Masayuki| 竹元 嘉利| 榊原 精| 飛田 守孝|
抄録 Fine particles of Ti-Mo alloy were prepared by evaporation. When Ti-40at % Mo alloy was evaporated on tungsten filament, fine particles of Ti contaminated with W were obtained. These particles were polyhedron in shape and 10~250nm in diameter. Average diameter and size distribution increased with pressure of argon gas (100~600 Torr). When pure Ti was placed on the Mo filament and evaporated from melt down of heated Mo filament in helium gas, fine particles of pure Ti and of Ti-Mo alloy were obtained. In this case, Ti particles were of indeterminate form and of several tens nm in diameter, and their diffraction pattern was of common α-Ti. On the other hand, composition of the Ti-Mo particles was determined to be 18at % Mo by an analysis of EDX. Structure of Ti-Mo particles could not be determined because their diameters were more than 600nm. The temperature of Mo filament, for the most part, was about 1800℃, and there pure Ti particles were produced. The temperature of the fused part of the filament was locally higher than 2600℃, and there Ti-Mo particles were produced. Fine structures of contact region among some Ti particles were observed with HRTEM.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-03-29
24巻
2号
開始ページ 1
終了ページ 9
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307765
JaLCDOI 10.18926/15488
フルテキストURL Mem_Fac_Eng_OU_25_1_37.pdf
著者 Bouzidi, Moncef| 古賀 隆治| 和田 修己| 香川 直己| Hai, Xu| 小坂 恵| Sano, Hiroya|
抄録 Is proposed a tunable diode laser absorption spectrometer system which employs a pulsed current to drive the diode laser still implementing a second-harmonic detection methods enhancing a signal to noise up to 104 times that the case without it. This system affords the lead-salt diode laser a higher operating temperature which allows a more compact deep cooling system. A principle is based on employing a gated integrator between the preamplifier and the lock-in amplifier. Investigations are made on the optimum selection of the gating aperture time interval as determined by response time of the infrared detector and the pulse width of the laser driving current.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 37
終了ページ 50
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307549
JaLCDOI 10.18926/15487
フルテキストURL Mem_Fac_Eng_OU_24_1_135.pdf
著者 谷口 健男| 末次 剛| Iwasaki Masaki|
抄録 This paper describes the numerical simulation method of the multi-crack propagation behaviour which appear in a part of civil engineering structures with complex geometrical configuration like steel bridges. Proposed method can treat the interaction of several cracks which locate in a short distance each other, and the process of their growth can be grasped. The method is based on the finite element method, and the linear fracture mechanics is assumed. Proposed method includes following tools for the simulation of the crack propagation behaviour: Automatic Mesh Generators for 3-D, 2-D structural analysis, and 2-D crack propagation analysis, Multi-level Structural Analysis Technique, Estimation Method of the crack growth and the angle of cracks and the modelling method of traffic loadings. The validity of the method is investigated by comparing the result to the experimental one.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 135
終了ページ 152
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307854
JaLCDOI 10.18926/15486
フルテキストURL Mem_Fac_Eng_OU_25_1_23.pdf
著者 三浦 嘉也| 高田 潤| 尾坂 明義| 河村 利夫|
抄録 Zinc oxide films were prepared on silica glass substrates by the use of an r.f. activated reactive evaporation (ARE) method, and were examined by X-ray diffraction (XRD) and scanning electron micrograph (SEM). XRD measurements indicate that the films were c-axis oriented and that an r.f. plasma of Zn and O was necessary for the ZnO film deposition. Substrate temperature, oxygen gas pressure, evaporation rate, r.f. power and inlet position of oxygen gas effect the c-axis orientation, the growth rate and the microstructure of the films. Optimum conditions for a dense film with a fine texture of the surface and having good crystallinity were as follows: the substrate temperature;400℃, the evaporation rate;5.0(A)/s, the oxygen pressure;2.0x10(-4) Torr, the r.f. power;150 to 200W, and the oxygen gas inlet near the substrate. For the film prepared under the optimum conditions, the standard deviation σ of the rocking curve for the (002) diffraction was 1.9deg, smaller than that of the film prepared by using an r.f. sputtering method.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 23
終了ページ 35
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307600
JaLCDOI 10.18926/15485
フルテキストURL Mem_Fac_Eng_OU_24_1_115.pdf
著者 阿部 宏史| Nogata Mikio|
抄録 The rapid economic growth of Japan in the postwar period has brought about the over-concentration of activities in a few large cities, and local regions have been losing their economic vitality due to the regional differentials and the population loss. Regional development planning in Japan has sought to achieve a balanced growth of the nation through the development of industries in local regions. This paper aims to examine the regional structure of manufacturing industries in the postwar period and to identify its current problems. Three methods, namely the analysis of coefficient of variation, the rateshare analysis and the shift-share analysis are applied using employment data of manufacturing industries for the years 1955 to 1985. Findings show that while the employment of manufacturing industries has been markedly decentralized from metropolitan to local regions, the disparities in growth rates still exist among regions.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 115
終了ページ 133
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307659
JaLCDOI 10.18926/15484
フルテキストURL Mem_Fac_Eng_OU_25_1_15.pdf
著者 榊原 精| Kanadani, Teruto|
抄録 Aging of Al-lmass % Ag alloy at 273K after quenching under various conditions was studied by measurement of electrical resistivity. Scattering of the quasi-equilibrium value of resistivity (p(e)) was not random but closely related to the as-quenched value (p(o)); P(e) increased with increasing p(o)' When the quenching temperature (T(q)) was lower than or equal to 773K, the state at p(e) was controlled substantially by the concentration of quenched vacancy. On the other hand, when T(q)>823K, GP zones formed during quenching played an important role, instead of quenched vacancies, in determining the state.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 15
終了ページ 21
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307255
JaLCDOI 10.18926/15483
フルテキストURL Mem_Fac_Eng_OU_24_1_107.pdf
著者 河野 伊一郎| 西垣 誠| 竹下 祐二|
抄録 The numerical feasibility of determining soil water retention and hydraulic conductivity functions simultaneously from one-dimensional transient flow experiments in the laboratory by parameter estimation method is evaluated. Soil hydraulic properties are assumed to be represented by van Genuchten's closed-form expressions involving two unknown parameters: coefficients α and n . These parameters are evaluated by nonlinear least-squares fitting of predicted and observed pressure head with time. Gravity drainage experiments are performed for Toyoura standard sand to evaluate the adequacy of this proposed method.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 107
終了ページ 114
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307749
JaLCDOI 10.18926/15482
フルテキストURL Mem_Fac_Eng_OU_24_1_93.pdf
著者 東辻 浩夫| 畑谷 光輝|
抄録 Propagation of charged carriers in semiconductor superlattices is analyzed on the basis of the effective mass approximation with appropriate boundary conditions at heterojunctions taken into account. Applying the finite element method, clarified are the effects of details of the potential profile, such as linear and smooth gradings and random fluctuations, on characteristics of superlattices which are expected to work as collector barriers and energy filters in electronic devices.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 93
終了ページ 105
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307513
JaLCDOI 10.18926/15481
フルテキストURL Mem_Fac_Eng_OU_24_1_81.pdf
著者 和田 修己|
抄録 Are calculated the radiation characteristics of two types of primary-feed waveguides of millimeter wave quasi-optical antennas, which transform circular TE(On) mode into a linearly polarized beam. These antennas are utilized for heating and diagnostics of fusion plasma. Analysis is based on the Huygens-Fresnel principle, which takes the diffraction effect into account. For Convenience in analysis, a feed waveguide is divided into two sections, an uniform waveguide section and a visor section. Assuming that the diameter of the waveguide is several times as large as the wavelength and that the structure of the visor is open, the radiation field is approximated by superposition of direct radiation, and first and second reflection on the visor. Numerical results are presented and compared with experimental results. In these types of waveguides, the shadow section on the visor has a great influence on the radiation field. The results of calculation show that the length of the visor should be longer than that obtained by the geometrical optics, and the longer visor reduces the side-lobe level in the direction of the waveguide axis. The results agree well with those in experiments.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 81
終了ページ 92
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307974
JaLCDOI 10.18926/15480
フルテキストURL Mem_Fac_Eng_OU_25_1_1.pdf
著者 Gao Hong| 和田 力| 則次 俊郎|
抄録 How to reduce and simplify the calculation for image recognition is a very attractive and important issue in order to realize the real time control of a robot based on the image recognition results. This paper describes a method of extracting 2 - dimensional geometrical features of cubic objects based on the normal vector distributions from the visual information obtained with the laser range finder to reduce the calculation of the image recognition. In this research a laser beam is scanned in the horizontal plane to which the cubic objects stand vertically and the laser spot is detected with a TV camera every sampling time. These spots make an intermittent locus which includes some special lines corresponding to the cubic objects. To extract the features of the cubic objects, we utilize the normal vectors formed on the locus. If some normal vectors distribute in the same direction and the origin of the normal vectors are very close to their neighbor's, these normal vectors can be classified into the same class, -the straight line class. Because the normal vectors on the neighbor surfaces of the cubic objects are vertical to each other, we use this property to determine the pair of straight lines which belong to the cubic objects. Making the histogram based on the normal vectors with the same direction, we obtain the peaks which are supported by the points on the cubic object surfaces. Then, the points can be extracted from the set of points on the whole locus inversely according to the relations with the peaks and the features of the cubic object can be extracted by applying method of least square to these extracted points. The experiments proved the availability of the proposed processing algorithm.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1990-12-14
25巻
1号
開始ページ 1
終了ページ 13
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308010
JaLCDOI 10.18926/15479
フルテキストURL Mem_Fac_Eng_OU_24_1_73.pdf
著者 岡 久雄| Isayama Yoshiharu| 山本 尚武| 山本 辰馬|
抄録 There is a small vibration which goes undetected by the naked eyes. It is called a microvibration (MV) or a minor tremor (MT). The MV on the body surface is expected to apply to a clinical examination of the autonomic nervous system. It is not cleared why and how the MV occurs, but there are many papers about its occurrence and clinical application. In this study, MV measuring system, its estimation and basic characteristics are examined. The difference between head MV and thenar MV, individual MV and diurnal and seasonal change are discussed. The power spectrum of MV is obtained using an autoregressive model.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 73
終了ページ 80
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307633
JaLCDOI 10.18926/15478
フルテキストURL Mem_Fac_Eng_OU_23_2_45.pdf
著者 谷口 健男| Fujiwara, Kohji|
抄録 This paper includes a solver for a large sparse set of linear algebraic equations which are obtained by the application of the finite element method to static structural problems. Proposed method is a modification of Robust Incomplete Choleski-Conjugate Gradient Method, which belongs to Preconditioned Conjugate Gradient Method suitable for supercomputers. Through a number of numerical experiments the authors show that Robust Incomplete Choleski-Conjugate Gradient Method sometimes fails in to obtain the solutions, secondly they clarify the reason of the failures from the theoretical viewpoint, and finally they propose a modification of the robust method by the introduction of the theoretical result. Proposed method is as effective as the original, and it can overcome the demerit of Robust Method which is clarified through numerical experiments.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 45
終了ページ 55
ISSN 0475-0071
言語 日本語
論文のバージョン publisher
NAID 120002307820
JaLCDOI 10.18926/15477
フルテキストURL Mem_Fac_Eng_OU_23_2_33.pdf
著者 Ishihara Yuji| 山本 恭二|
抄録 This paper deals with the low Mach numbers flow of a rarefied vapour past a liquid sphere accompanied with condensation and evaporation at its surface. The linearized Bhatnager-Gross-Krook(B-G-K} equation is used for the analysis, and from it the integral equations of the density, temperature and flow velocities are derived. These integral equations are solved numerically over a wide range of the Knudsen number covering from the slip flow to the nearly free molecular flow. The drag on the sphere is also calculated and is compared with that of previous work.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 33
終了ページ 44
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307401
JaLCDOI 10.18926/15476
フルテキストURL Mem_Fac_Eng_OU_24_1_63.pdf
著者 山本 尚武| Isshiki Hiromi| 岡 久雄| 山本 辰馬|
抄録 There is no doubt that many people feel the peace of mind or the pleasures of senses in appreciating music. But the estimation of the effect is very difficult and the objective estimation can be hardly done. This study proposed the objective estimating method of human emotion utilizing galvanic skin reflex (GSR) which reflects a human psychological activity. In this method, not by individual response, but by the series of response and pattern of appearance of GSR, the emotional response under appreciating music was investigated. In the case of appreciation of the same classic music to several subjects, the individual GSR responses are random and remarkable characteristic could not be find on the results. However, on the patterns of appearance of GSR, the patterns obtaining from the same generation are much similar each other and the patterns obtaining from different generation are less similar. It was cleared that the same music gave different effect on different generations.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 63
終了ページ 72
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307670
JaLCDOI 10.18926/15475
フルテキストURL Mem_Fac_Eng_OU_23_2_21.pdf
著者 Myojin Sho| Yamada Masahito| Fujii Naoto|
抄録 Diversion model and disaggregate behavioral model of logit type are adopted as aggregate and disaggregate estimates, respectively. Diversion model is assumed as a binary choice process including diversion ratio function at each step in the process. Diversion ratio is assumed as a function of generalized-travel-time ratio. The function is identified with each of the two steps of diversion; diverson from rail and bus to car at first and from the rest undiverted to bus at second. The data used are those on inter-regional occupational person trips. Each function are found enough and/or critically significant in the statistical sense. At the begginning, sixteen characteristics variables are enrolled in disaggregate model, which are identified by use of the above data. Six variables are reached finally and are all reasonable. A brief comparison of goodness of fit to the data are made between two models.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-03-30
23巻
2号
開始ページ 21
終了ページ 32
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307168
JaLCDOI 10.18926/15474
フルテキストURL Mem_Fac_Eng_OU_24_1_53.pdf
著者 尾坂 明義| Takao Seiji| 小田 喜一| 高田 潤| 三浦 嘉也|
抄録 Electrical resistance and X-ray photoelectron depth profile analysis are studied for antimony doped tin oxide films developed on silica, alkali-free and sodalime slide glass substrates. The sodium ions diffused from the substrates to the films prevented the crystal growth of rutile type tin oxide in the film, resulting in the high electrical resistance. A diffusion layer has been detected for each film with diffuse profiles of multi valent cations (Sn, Si or Ca) at the interface of the tin oxide film and substrate. A greater amount of sodium atoms have been detected in the film developed on the soda-lime glass while almost no sodium atoms have been found in those on the other substrates. This can be explained by the diffusion of the sodium ions in the substrate due to a drastic hydronium-sodium exchange mechanism under highly acidic conditions during the dipping and drying processes.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1989-11-29
24巻
1号
開始ページ 53
終了ページ 61
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307279
JaLCDOI 10.18926/15473
フルテキストURL Mem_Fac_Eng_OU_26_2_61.pdf
著者 Osaka, Akiyoshi| Kawabata Kouji| Nanba, Tokuro| Takada, Jun| Miura, Yoshinari|
抄録 Mullite-dispersed silica ceramics were prepared through sol-gel processing by the use of tetraethoxy silane, aluminium nitrate and aluminium isopropoxide as the Si and Al sources where HCl and HN0(3) were the catalyst. Effect of the starting materials, solvents and catalysts was examined on the gelation time or temperature of mullite precipitation. Apparent activation energy of gelation ranged from 80 to 95kJ/mol. The presence of AI in the sols elongated the gelling time suggesting the formation of chelate bonds between AI and Si-OR or Si-OH bonds.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 1992-03-28
26巻
2号
開始ページ 61
終了ページ 67
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002307416