| ID | 65512 |
| フルテキストURL | |
| 著者 |
Shinonaga, Togo
Okayama University
Ochi, Akihiro
Okayama University
Kishimoto, Ryuya
Okayama University
Pityana, Sisa
National Laser Centre, CSIR
Arthur, Nana
National Laser Centre, CSIR
Omoniyi, Peter
University of Johannesburg
Mahamood, Rasheedat
University of Johannesburg
Maina, Martin
Jomo Kenyatta University of Agriculture and Technology
Akinlabi, Esther
University of Johannesburg
|
| 抄録 | Titanium alloy Ti6Al4V has been widely applied to medical, automotive, and aerospace industries due to its excellent properties such as high strength and excellent corrosion resistance. On the other hand, additive manufacturing (AM) technology can give the freedom of design of the products. In order to spread the AMed products, the joining of AMed and wrought products are required, and it is important to understand the joint characteristics. In this study, butt welding of Ti6Al4V plate was conducted by fiber laser in argon shielding, and the joint characteristics of laser weld wrought/wrought, AMed/AMed, and AMed/wrought Ti6Al4V plates were experimentally investigated. The AMed plate has higher tensile strength than wrought plate but the elongation of AMed plate is smaller, since AMed plate has α’ martensite due to rapid cooling during laser irradiation in AM process. Then, the laser weld joint of AMed/AMed plates has higher tensile strength, but smaller elongation than that of wrought/wrought plates. The weld joint of AMed/wrought plates shows good welding state, since small heat input leads to formation of small weld bead with higher hardness between wrought and AMed plates.
|
| キーワード | Ti6Al4V
Joint characteristics
Laser welding
Butt welding
Additive manufacturing
|
| 備考 | The version of record of this article, first published in Welding in the World, is available online at Publisher’s website: http://dx.doi.org/10.1007/s40194-023-01533-3
|
| 発行日 | 2023-06-08
|
| 出版物タイトル |
Welding in the World
|
| 巻 | 67巻
|
| 号 | 8号
|
| 出版者 | Springer Science and Business Media LLC
|
| 開始ページ | 1997
|
| 終了ページ | 2005
|
| ISSN | 0043-2288
|
| 資料タイプ |
学術雑誌論文
|
| 言語 |
英語
|
| OAI-PMH Set |
岡山大学
|
| 著作権者 | © The Author(s) 2023
|
| 論文のバージョン | publisher
|
| DOI | |
| Web of Science KeyUT | |
| 関連URL | isVersionOf https://doi.org/10.1007/s40194-023-01533-3
|
| ライセンス | http://creativecommons.org/licenses/by/4.0/
|
| Citation | Okamoto, Y., Shinonaga, T., Takemoto, Y. et al. Study on joint characteristics in laser butt welding of AMed and wrought Ti6Al4V plates. Weld World 67, 1997–2005 (2023). https://doi.org/10.1007/s40194-023-01533-3
|
