Determination of trace heavy metals by sequential injection-anodic stripping voltammetry using bismuth film screen-printed carbon electrode

A sequential injection-square-wave anodic stripping voltammetry (SIA-SWASV) is proposed for the simultaneous determination of Pb(II), Cd(II) and Zn(II), employing an in situ plated bismuth film screen-printed carbon electrode (Bi-SPCE) as a working electrode and hydrochloric acid as a supporting electrolyte. Bi(III) and analyte metal ions were on-line deposited onto a SPCE at -1.4 V vs. Ag/AgCl for 180 s. At a stopped flow, a square-wave voltammogram was recorded from -1.3 to 0 V vs. Ag/AgCl. The experimental conditions were optimized. Under the optimum conditions, the linear ranges were 0 - 70 mu g L-1 for Pb(II) and Cd(II), and 75 - 200 mu g L-1 for Zn(II). The limits of detection (S/N = 3) were obtained at concentrations as low as 0.89 mu g L-1 for Pb(II) and 0.69 mu g L-1 for Cd(II) for a 180-s deposition time. The proposed method was applied to the determination of Pb(II), Cd(II) and Zn(II) in water samples with satisfactory results.

Published with permission from the copyright holder.
This is published in Analytical Sciences, 2008 Vol.24 Issue.5 pp.589-594
Publisher URL: http://dx.doi.org/10.2116/analsci.24.589
Direct access to Thomson Web of Science record
(C)2008 by The Japan Society for Analytical Chemistry