JaLCDOI | 10.18926/46947 |
---|---|
フルテキストURL | mfe_38_1-2_005_014.pdf |
著者 | Ishimaru, Kazuhito| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |
抄録 | Temperature distribution in the reactor furnace is mainly operated by gas blowing from multiple tuyeres and material charge distribution. The objective of our research is obtain the optimal profile of gas flow to control temperature distribution in the reactor furnace in the shortest possible time. We formulated the optimization problem to reduce deviation of temperature distribution from its desired one in the reactor furnace. Based on the formulation, gas blow conditions are optimized by a sequential quadratic programming method to realize the desired temperature distribution. The validity of the method was checked through numerical experiments. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2004-03 |
巻 | 38巻 |
号 | 1-2号 |
開始ページ | 5 |
終了ページ | 14 |
ISSN | 0475-0071 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 80016785933 |
JaLCDOI | 10.18926/46946 |
---|---|
フルテキストURL | mfe_38_1-2_001_004.pdf |
著者 | Sakakibara, Akira| Kanadani, Teruto| |
抄録 | The relationship between occurrence of serration and reversion heat treatment was studied by tensile test on Al-10mass%Zn alloy. Serration was observed for the furnace cooled specimen, but not for the as-quenched one and the shortly aged one, which result is difficult to be interpreted by the Cottrell theory. The stress amplitude in the serration increased with increasing the time of annealing for reversion up to 10ks and then stayed at a constant value which might be interpreted by the Cottrell theory. The stress amplitude in the serration decreased with increasing the annealing temperature, which is contrary to the prediction by the Cottrell theory. The specimen directly annealed without aging and the one annealed after aging agreed well with each other in the tensile strength and the stress amplitude in the serration, which suggests solute clusters as the cause of serration. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2004-03 |
巻 | 38巻 |
号 | 1-2号 |
開始ページ | 1 |
終了ページ | 4 |
ISSN | 0475-0071 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 80016785932 |
著者 | Faculty of Engineering, Okayama University| |
---|---|
発行日 | 2004-03 |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
巻 | 38巻 |
号 | 1-2号 |
資料タイプ | その他 |
JaLCDOI | 10.18926/44500 |
---|---|
フルテキストURL | mfe_045_054_059.pdf |
著者 | Nekado, Kenta| Takai, Yusuke| Nogami, Yasuyuki| Morikawa, Yoshitaka| |
抄録 | Recently, pairing–based cryptographies have attracted much attention. For fast pairing calculation, not only pairing algorithms but also arithmetic operations in extension field should be efficient. Especially for final exponentiation included in pairing calculation, squaring is more important than multiplication. This paper considers squaring algorithms efficient for cubic extension field which is often used for pairing implementaions. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2011-01 |
巻 | 45巻 |
開始ページ | 54 |
終了ページ | 59 |
ISSN | 1349-6115 |
言語 | 英語 |
著作権者 | Copyright © by the authors |
論文のバージョン | publisher |
NAID | 80021759252 |
JaLCDOI | 10.18926/44499 |
---|---|
フルテキストURL | mfe_045_046_053.pdf |
著者 | Nogami, Yasuyuki| Yanagi, Erika| Izuta, Tetsuya| Morikawa, Yoshitaka| |
抄録 | Recently, composite order pairing–based cryptographies have received much attention. The composite order needs to be as large as the RSA modulus. Thus, they require a certain pairing–friendly elliptic curve that has such a large composite order. This paper proposes an efficient algorithm for generating an ordinary pairing–friendly elliptic curve of the embedding degree 1 whose order has two large prime factors as the RSA modulus. In addition, the generated pairing–friendly curve has an efficient structure for the Gallant–Lambert–Vanstone (GLV) method. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2011-01 |
巻 | 45巻 |
開始ページ | 46 |
終了ページ | 53 |
ISSN | 1349-6115 |
言語 | 英語 |
著作権者 | Copyright © by the authors |
論文のバージョン | publisher |
NAID | 120002905955 |
JaLCDOI | 10.18926/44498 |
---|---|
フルテキストURL | mfe_045_036_045.pdf |
著者 | Kanatani, Kenichi| Niitsuma, Hirotaka| |
抄録 | We present a new method for optimally computing the 3-D rotation from two sets of 3-D data. Unlike 2-D data, the noise in 3-D data is inherently inhomogeneous and anisotropic, reflecting the characteristics of the 3-D sensing used. To cope with this, Ohta and Kanatani introduced a technique called “renormalization”. Following them, we represent a 3-D rotation in terms of a quaternion and compute an exact maximum likelihood solution using the FNS of Chojnacki et al. As an example, we consider 3-D data obtained by stereo vision and optimally compute the 3-D rotation by analyzing the noise characteristics of stereo reconstruction. We show that the widely used method is not suitable for 3-D data. We confirm that the renormalization of Ohta and Kanatani indeed computes almost an optimal solution and that, although the difference is small, the proposed method can compute an even better solution. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2011-01 |
巻 | 45巻 |
開始ページ | 36 |
終了ページ | 45 |
ISSN | 1349-6115 |
言語 | 英語 |
著作権者 | Copyright © by the authors |
論文のバージョン | publisher |
NAID | 80021759250 |
JaLCDOI | 10.18926/44497 |
---|---|
フルテキストURL | mfe_045_027_036.pdf |
著者 | Kanatani, Kenichi| Sugaya, Yasuyuki| |
抄録 | We describe in detail the algorithm of bundle adjustment for 3-D reconstruction from multiple images based on our latest research results. The main focus of this paper is on the handling of camera rotations and the efficiency of computation and memory usage when the number of variables is very large; an appropriate consideration of this is the core of the implementation of bundle adjustment. Computing the fundamental matrix from two views and reconstructing the 3-D structure from multiple views, we evaluate the performance of our algorithm and discuses technical issues of bundle adjustment implementation. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2011-01 |
巻 | 45巻 |
開始ページ | 27 |
終了ページ | 35 |
ISSN | 1349-6115 |
言語 | 英語 |
著作権者 | Copyright © by the authors |
論文のバージョン | publisher |
NAID | 80021759249 |
JaLCDOI | 10.18926/44496 |
---|---|
フルテキストURL | mfe_045_015_026.pdf |
著者 | Kanatani, Kenichi| Rangrajan, Prasanna| Sugaya, Yasuyuki| Niitsuma, Hirotaka| |
抄録 | We present a new least squares (LS) estimator, called “HyperLS”, specifically designed for parameter estimation in computer vision applications. It minimizes the algebraic distance under a special scale normalization, which is derived by rigorous error analysis in such a way that statistical bias is removed up to second order noise terms. Numerical experiments suggest that our HyperLS is far superior to the standard LS and comparable in accuracy to maximum likelihood (ML), which is known to produce highly accurate results in image applications but may fail to converge if poorly initialized. Our HyperLS is a perfect candidate for ML initialization. In addition, we discuss how image-based inference problems have different characteristics form conventional statistical applications, with a view to serving as a bridge between mathematicians and computer engineers. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2011-01 |
巻 | 45巻 |
開始ページ | 15 |
終了ページ | 26 |
ISSN | 1349-6115 |
言語 | 英語 |
著作権者 | Copyright © by the authors |
論文のバージョン | publisher |
NAID | 120002905952 |
JaLCDOI | 10.18926/44495 |
---|---|
フルテキストURL | mfe_045_001_014.pdf |
著者 | Akiyoshi, Tatsuro| Imai, Jun| Konishi, Masami| |
抄録 | This paper presents a method of the controller design for the handling machine by using dsPIC(Digital Signal Processor + Peripheral Interface Controller). Recently, many manufacturing robots are operated in manufacturing facilities, with the aim of labor, cost saving, and improvement of the productivity. Such robots need to have positioning performance of high precision and simultaneously to save cost. In this paper, a digital optimal servo controller is designed, and it is implemented into our barebones controller which involves dsPIC. We have designed and manufactured the controller which is added suitable peripherals to improve the consistency between the mechanical machine operating in continuous time and controller in discrete time. The significance of this research is that digital implementation of the embedded system which has performance-limitation has ensured a comparable result, against the one with PC which has broad utility. When it is used as a controller, it is possible to restrain product prices greatly equivalent PC precision. We demonstrate potential that good control can be achieved even with low cost. Our research has lead to the viability of lower cost and higher performance system for the production process at factories. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2011-01 |
巻 | 45巻 |
開始ページ | 1 |
終了ページ | 14 |
ISSN | 1349-6115 |
言語 | 英語 |
著作権者 | Copyright © by the authors |
論文のバージョン | publisher |
NAID | 120002905951 |
著者 | Faculty of Engineering, Okayama University| |
---|---|
発行日 | 2011-01 |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
巻 | 45巻 |
資料タイプ | その他 |
JaLCDOI | 10.18926/20012 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_29_1_15.pdf |
著者 | 東辻 千枝子| Matsubara, Takeo| Obuchi, Masumi| |
抄録 | A molecular orbital approach to the electronic structure of C(60) molecule is formulated on the basis of optimized bond orbital model and the stability of the truncated icosahedron structure is examined. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 1994-11-30 |
巻 | 29巻 |
号 | 1号 |
開始ページ | 15 |
終了ページ | 22 |
ISSN | 0475-0071 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002310919 |
JaLCDOI | 10.18926/20011 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_29_1_7.pdf |
著者 | Hiroyuki Tachibana| 東辻 浩夫| 奈良 重俊| 東辻 千枝子| |
抄録 | Effects of interface fluctuations on the electronic states in semiconductor quantum dots are analyzed on the basis of numerical solutions for ground state wave functions and energy eigenvalues. It is shown that the effective volume of confinement becomes smaller than the real volume of quantum dots due to fluctuation. This effect comes from the fact that the wave functions with larger characteristic wavelength are not able to deform themselves following the fluctuation of interfaces exactly. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 1994-11-30 |
巻 | 29巻 |
号 | 1号 |
開始ページ | 7 |
終了ページ | 14 |
ISSN | 0475-0071 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002310741 |
JaLCDOI | 10.18926/19962 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_73.pdf |
著者 | Imanaka, Hiroyuki| Tanaka, Soukichi| Feng, Bin| Imamura, Koreyoshi| Nakanishi, Kazuhiro| |
抄録 | We used modified Czapek-Dox (mCD) or dextrin-peptone-yeast extract (DPY) media to cultivate a filamentous fungus, Aspergillus oryzae IAM 2706 by three different cultivation methods, i.e., shaking-flask culture (SFC), agar-plate culture (APC), and membrane-surface liquid culture (MSLC), to identify the differences in cultivation behaviors and gene transcriptional profiles. The fungi cultivated by APC or MSLC secreted a greater number of different proteins/enzymes in larger quantities compared with fungi cultivated by SFC, particularly when DPY medium was used. In particular, the amounts of protease secreted by fungi cultivated via MSLC or APC were much greater compared with SFC. When mCD medium was used, α-amylase activity was barely detectable in all cultures while the activity was detected in MSLC and APC in a quantity that was several times higher than that in SFC using DPY medium. SDS-PAGE analysis and N-terminal amino acid sequences confirmed 6 proteins in the culture supernatants when DPY medium was used. Among these proteins oryzin (an alkaline protease) and α-amylase were detected at much higher levels in APC and MSLC compared with SFC, which was consistent with the measured activity of the secreted enzymes. However, when mCD medium was used, only oryzin was detected in significant amounts in MSLC and APC. Microarray analyses of the fungi cultivated by SFC, APC or MSLC using either mCD or DPY media indicated that the gene transcriptional profile of the MSLC sample was similar to that of the APC sample but different from that of the SFC sample. When mCD medium was used, most of the genes that were up-regulated 10-folds or greater in the MSLC sample relative to the SFC sample were unknown or predicted proteins. Transcription of the oryzin gene was only slightly up-regulated in the MSLC sample while transcription of the α-amylase gene was slightly down-regulated. On the other hand, when DPY medium was used, many known genes including the oryzin gene were up-regulated in the MSLC sample versus the SFC sample. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 73 |
終了ページ | 83 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309053 |
JaLCDOI | 10.18926/19961 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_69.pdf |
著者 | Nekado, Kenta| Kato, Hidehiro| Nogami, Yasuyuki| Morikawa, Yoshitaka| |
抄録 | Recently, pairing–based cryptographies have attracted much attention. For fast pairing calculation, not only pairing algorithms but also arithmetic operations in extension field should be efficient. Especially for final exponentiation included in pairing calculation, squaring is more important than multiplication. This paper proposes an efficient squaring algorithm in extension field for Freeman curve. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 69 |
終了ページ | 72 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309070 |
JaLCDOI | 10.18926/19960 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_60.pdf |
著者 | Nogami, Yasuyuki| Morikawa, Yoshitaka| |
抄録 | This paper proposes a method for generating a certain composite order ordinary pairing–friendly elliptic curve of embedding degree 3. In detail, the order has two large prime factors such as the modulus of RSA cryptography. The method is based on the property that the order of the target pairing–friendly curve is given by a polynomial as r(X) of degree 2 with respect to the integer variable X. When the bit size of the prime factors is about 500 bits, the proposed method averagely takes about 15 minutes on Core 2 Quad (2.66Hz) for generating one. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 60 |
終了ページ | 68 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309063 |
JaLCDOI | 10.18926/19959 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_50.pdf |
著者 | 金谷 健一| Niitsuma Hirotaka| Rangrajan Prasanna| |
抄録 | We present highly accurate least-squares (LS) alternatives to the theoretically optimal maximum likelihood (ML) estimator for homographies between two images. Unlike ML, our estimators are non-iterative and yield solutions even in the presence of large noise. By rigorous error analysis, we derive a “hyperaccurate” estimator which is unbiased up to second order noise terms. Then, we introduce a computational simplification, which we call “Taubin approximation”, without incurring a loss in accuracy. We experimentally demonstrate that our estimators have accuracy surpassing the traditional LS estimator and comparable to the ML estimator. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 50 |
終了ページ | 59 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002308986 |
JaLCDOI | 10.18926/19958 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_42.pdf |
著者 | 金谷 健一| Rangrajan Prasanna| |
抄録 | This paper presents a new method for fitting an ellipse to a point sequence extracted from images. It is widely known that the best fit is obtained by maximum likelihood. However, it requires iterations, which may not converge in the presence of large noise. Our approach is algebraic distance minimization; no iterations are required. Exploiting the fact that the solution depends on the way the scale is normalized, we analyze the accuracy to high order error terms with the scale normalization weight unspecified and determine it so that the bias is zero up to the second order. We demonstrate by experiments that our method is superior to the Taubin method, also algebraic and known to be highly accurate. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 42 |
終了ページ | 49 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309054 |
JaLCDOI | 10.18926/19957 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_32.pdf |
著者 | 金谷 健一| Niitsuma Hirotaka| Sugaya Yasuyuki| |
抄録 | We present an alternative approach to what we call the “standard optimization”, which minimizes a cost function by searching a parameter space. Instead, the input is “orthogonally projected” in the joint input space onto the manifold defined by the “consistency constraint”, which demands that any minimal subset of observations produce the same result. This approach avoids many difficulties encountered in the standard optimization. As typical examples, we apply it to line fitting and multiview triangulation. The latter produces a new algorithm far more efficient than existing methods. We also discuss optimality of our approach. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 32 |
終了ページ | 41 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309124 |
JaLCDOI | 10.18926/19956 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_24.pdf |
著者 | 金谷 健一| Sugaya Yasuyuki| |
抄録 | We present an improved version of the MSL method of Sugaya and Kanatani for multibody motion segmentation. We replace their initial segmentation based on heuristic clustering by an analytical computation based on GPCA, fitting two 2-D affine spaces in 3-D by the Taubin method. This initial segmentation alone can segment most of the motions in natural scenes fairly correctly, and the result is successively optimized by the EM algorithm in 3-D, 5-D, and 7-D. Using simulated and real videos, we demonstrate that our method outperforms the previous MSL and other existing methods. We also illustrate its mechanism by our visualization technique. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 24 |
終了ページ | 31 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309159 |
JaLCDOI | 10.18926/19955 |
---|---|
フルテキストURL | Mem_Fac_Eng_OU_44_13.pdf |
著者 | 金谷 健一| Sugaya Yasuyuki| |
抄録 | A new numerical scheme is presented for computing strict maximum likelihood (ML) of geometric fitting problems having an implicit constraint. Our approach is orthogonal projection of observations onto a parameterized surface defined by the constraint. Assuming a linearly separable nonlinear constraint, we show that a theoretically global solution can be obtained by iterative Sampson error minimization. Our approach is illustrated by ellipse fitting and fundamental matrix computation. Our method also encompasses optimal correction, computing, e.g., perpendiculars to an ellipse and triangulating stereo images. A detailed discussion is given to technical and practical issues about our approach. |
出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
発行日 | 2010-01 |
巻 | 44巻 |
開始ページ | 13 |
終了ページ | 23 |
ISSN | 1349-6115 |
言語 | 英語 |
論文のバージョン | publisher |
NAID | 120002309170 |