JaLCDOI | 10.18926/46949 |
---|---|

フルテキストURL | mfe_38_1-2_029_032.pdf |

著者 | Totsuji, Hiroo| Totsuji, Chieko| Ogawa, Takafumi| Tsuruta, Kenji| |

抄録 | The structure of dust particles in dusty plasmas under microgravity has been analyzed by molecular dynamics simulation. The charge neutrality condition satisfied by the system composed of dust particles and ambient plasma is properly taken into account. It is shown that dust particles form shell structures at low temperatures and the number of shells are obtained as a phase diagram in the plane of two parameters characterizing the system: the number of particles and the strength of screening. It is also shown that these structures are almost independent of the strength of screening. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 29 |

終了ページ | 32 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016863328 |

JaLCDOI | 10.18926/46950 |
---|---|

フルテキストURL | mfe_38_1-2_033_037.pdf |

著者 | Liman, M. Sanusi| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo| |

抄録 | The dynamic structure factor and the spectrum of the momentum-density fluctuations of 2D Yukawa liquids are analyzed in the domain of weak and intermediate coupling and screenlng parameters. The dispersion relations of the longitudinal and transverse collective excitations are obtained and compared with the random phase approximation (RPA) and harmonic approximation for triangular lattice. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 33 |

終了ページ | 37 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016863329 |

JaLCDOI | 10.18926/46952 |
---|---|

フルテキストURL | mfe_38_1-2_039_059.pdf |

著者 | Kanatani, Kenichi| |

抄録 | We investigate the meaning of "statistical methods" for geometric inference based on image feature points. Tracing back the origin of feature uncertainty to image processing operations, we discuss the implications of asymptotic analysis in reference to "geometric fitting" and "geometric model selection", We point out that a correspondence exists between the standard statistical analysis and the geometric inference problem. We also compare the capability of the "geometric AIC" and the "geometric MDL' in detecting degeneracy. Next, we review recent progress in geometric fitting techniques for linear constraints, describing the "FNS method", the "HEIV method", the "renormalization method", and other related techniques. Finally, we discuss the "Neyman-Scott problem" and "semiparametric models" in relation to geometric inference. We conclude that applications of statistical methods requires careful considerations about the nature of the problem in question. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 39 |

終了ページ | 59 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016889442 |

JaLCDOI | 10.18926/46953 |
---|---|

フルテキストURL | mfe_38_1-2_061_071.pdf |

著者 | Kanatani, Kenichi| Sugaya, Yasuyuki| |

抄録 | The Tomasi-Kanade factorization for reconstructing the 3-D shape of the feature points tracked through a video stream is widely regarded as based on factorization of a matrix by SVD (singular value decomposition). This paper points out that the core principle is the affine camera approximation to the imaging geometry and that SVD is merely one means of numerical computation. We first describe the geometric structure of the problem and then give a complete programming scheme for 3-D reconstruction. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 61 |

終了ページ | 71 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016889443 |

JaLCDOI | 10.18926/46954 |
---|---|

フルテキストURL | mfe_38_1-2_073_089.pdf |

著者 | Kenmochi, Yukiko| Imiya, Atsushi| |

抄録 | Boundary tracking and surface generation are ones of main topological topics for three-dimensional digital image analysis. However, there is no adequate theory to make relations between these different topological properties in a completely discrete way. In this paper, we present a new boundary tracking algorithm which gives not only a set of border points but also the surface structures by using the concepts of combinatorial/algebraic topologies. We also show that our boundary becomes a triangulation of border points (in the sense of general topology), that is, we clarify relations between border points and their surface structures. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 73 |

終了ページ | 89 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016889444 |

JaLCDOI | 10.18926/46955 |
---|---|

フルテキストURL | mfe_38_1-2_091_096.pdf |

著者 | Kanayama, Naoki| Yamakoshi, Kimi| Kiyomi, Masaaki| Magari, Masaki| Ohmori, Hitoshi| |

抄録 | Generally, IgM antibodies (Abs) produced in a primary immune response show lower affinity for an inducing antigen (Ag) compared with the corresponding IgG Abs that are major switched isotypes formed in the secondary response. An IgM molecule is a pentamer with 10 Ag-binding sites that will contribute to an increase of avidity for an Ag. To estimate the contribution of the pentameric structure to the avidity of an IgM Ab, we generated IgM and IgG1 monoclonal Abs (mAbs) with identical V regions that are specific for 4-hydroxy-3-nitrophenylacetyl (NP) by in vitro class switching of B cells followed by the cell fusion with a mouse myeloma cell line. Compared with an anti-NP IgG1 mAb, the corresponding IgM mAb showed much higher avidity for NP-conjugated bovine serum albumin, which was drastically reduced after being dissociated into monomers. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 91 |

終了ページ | 96 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80017001822 |

JaLCDOI | 10.18926/46956 |
---|---|

フルテキストURL | mfe_38_1-2_097_100.pdf |

著者 | Yamagiwa, Masashi| Hirao, Taichi| Kiyomi, Masaaki| Akao, Tetsuyuki| Mizuki, Eiichi| Ohba, Michio| Sakai, Hiroshi| |

抄録 | Bacillus thuringiensis subsp. coreanensis A2316 is a newly isolated strain from Yonakunijima Island in Japan. It produces the proteinaceous inclusion body (crystal) which has no insecticidal and hemolytic activities. When the crystal proteins were digested by proteinase K, they exhibited the strong cytotoxicity against human leukemic T cell, MOLT-4. The proteinase K-digested A2316 crystal proteins have little damage upon the cell membrane of MOLT-4, suggesting that the cell death of MOLT-4 was induced through a mechanism other than the colloid-osmotic swelling and cell lysis as caused by hitherto known B. thuringiensis crystal proteins. The 29-kDa polypeptide proved to be an active component of the proteinase K-digested A2316 crystal proteins. EC(50) of the purified 29-kDa polypeptide was 0.0579 μg/ml. The N-terminal amino acid sequence of the 29-kDa polypeptide was identical with that of p29 produced by B. thuringiensis A1519 strain and shared no significant homology with all the known proteins, suggesting that this polypeptide belong to a new family of B. thuringiensis crystal proteins. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2004-03 |

巻 | 38巻 |

号 | 1-2号 |

開始ページ | 97 |

終了ページ | 100 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80017001823 |

JaLCDOI | 10.18926/46967 |
---|---|

フルテキストURL | mfe_37_1_001_010.pdf |

著者 | Sotobayashi, Ken| Konishi, Masami| Nishi, Tatsushi| Imai, Jun| |

抄録 | Auto Guided Vehicles (AGVs) are widely used in a semi-conductor fabricating factory and contribute to the stable production of a high quality semi-conductor products. In the near future, further expansion of the transportation system is expected accompanied with the rapid growth of semi-conductor industries. In such situation, the necessity of performing quick planning of transportation route and transportation control will be elevated. In this paper, practicable planning of the transportation route and transportation control are studied based on the decentralized agent method. Especially, the geometrical sizes of AGVs are considered in the determination of transportation routes and control strategy avoiding the occurrence of mutual collisions or deadlock of AGVs. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2002-11 |

巻 | 37巻 |

号 | 1号 |

開始ページ | 1 |

終了ページ | 10 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120003457322 |

JaLCDOI | 10.18926/46968 |
---|---|

フルテキストURL | mfe_37_1_011_014.pdf |

著者 | Totsuji, Chieko| Limant, Muhammad S.| Tsuruta, Kenji| Totsuji, Hiroo| |

抄録 | A theoretical approach which has been successful in reproducing results of molecular-dynamics simulations on dusty plasmas is applied to estimate the screening length and the electric charge of two-dimensional dust crystals of melamine particles in the discharge chamber experiment. It has been found that the screening length is of the same order of magnitude as the inter-particle distance and the electric charge decreases on increasing number density of dust particles. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2002-11 |

巻 | 37巻 |

号 | 1号 |

開始ページ | 11 |

終了ページ | 14 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80015784816 |

JaLCDOI | 10.18926/46969 |
---|---|

フルテキストURL | mfe_37_1_015_023.pdf |

著者 | Kanatani, Kenichi| |

抄録 | In order to facilitate smooth communications with researchers in other fields including statistics, this paper investigates the meaning of "statistical methods" for geometric inference based on image feature points, We point out that statistical analysis does not make sense unless the underlying "statistical ensemble" is clearly defined. We trace back the origin of feature uncertainty to image processing operations for computer vision in general and discuss the implications of asymptotic analysis for performance evaluation in reference to "geometric fitting", "geometric model selection", the "geometric AIC", and the "geometric MDL". Referring to such statistical concepts as "nuisance parameters", the "Neyman-Scott problem", and "semiparametric models", we point out that simulation experiments for performance evaluation will lose meaning without carefully considering the assumptions involved and intended applications. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2002-11 |

巻 | 37巻 |

号 | 1号 |

開始ページ | 15 |

終了ページ | 23 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80015664455 |

JaLCDOI | 10.18926/46970 |
---|---|

フルテキストURL | mfe_37_1_025_032.pdf |

著者 | Kanazawa, Yasushi| Kanatani, Kenichi| |

抄録 | We present a new method for detecting point matches between two images without using any combinatorial search. Our strategy is to impose various local and non-local constraints as "soft" constraints by introducing their "confidence" measures via "mean-field approximations". The computation is a cascade of evaluating the confidence values and sorting according to them. In the end, we impose the "hard" epipolar constraint by RANSAC. We also introduce a model selection procedure to test if the image mapping can be regarded as a homography. We demonstrate the effectiveness of our method by real image examples. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2002-11 |

巻 | 37巻 |

号 | 1号 |

開始ページ | 25 |

終了ページ | 32 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80015664456 |

JaLCDOI | 10.18926/46971 |
---|---|

フルテキストURL | mfe_37_1_041_049.pdf |

著者 | Sugaya, Yasuyuki| Kanatani, Kenichi| |

抄録 | We study the problem of segmenting independently moving objects in a video sequence. Several algorithms exist for classifying the trajectories of the feature points into independent motions, but the performance depends on the validity of the underlying camera imaging model. In this paper, we present a scheme for automatically selecting the best model using the geometric AIC before the segmentation stage, Using real video sequences, we confirm that the segmentation accuracy indeed improves if the segmentation is based on the selected model. We also show that the trajectory data can be compressed into low-dimensional vectors using the selected model. This is very effective in reducing the computation time for a long video sequence. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2002-11 |

巻 | 37巻 |

号 | 1号 |

開始ページ | 41 |

終了ページ | 49 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120003457326 |

JaLCDOI | 10.18926/46972 |
---|---|

フルテキストURL | mfe_37_1_051_060.pdf |

著者 | Namba, Akihiro| Toyota, Yoshitaka| Wada, Osami| Koga, Ryuji| |

抄録 | This paper presents pulse timing control method to reduce electromagnetic emission from multiple signal interconnections. Pulse timing control gives intentional skew between signals. Higher order harmonics are canceled because of the difference of the phase between the signals. Using this property, pulse timing control can reduce the EMI in wide frequency range. In this paper, we show that radiated electromagnetic field from multiple signal lines reduces its intensity to the same level of the field from one line by using pulse timing control. The result of measurement shows that EMI from four differential transmission lines can be reduced more than 9 dB in the 200 MHz to 800 MHz frequency range. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2002-11 |

巻 | 37巻 |

号 | 1号 |

開始ページ | 51 |

終了ページ | 60 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80015683518 |

JaLCDOI | 10.18926/46975 |
---|---|

フルテキストURL | mfe_37_2_001_004.pdf |

著者 | Sakakibara, Akira| Kanadani, Teruto| |

抄録 | Effect of addition of Fe on the occurrence of serration in Al-12mass%Zn alloys was investigated. Specimens aged at 293K for various periods after quenching from various temperatures (T(Q)), 398K to 823K, were tensile-tested at room temperature. Serration occurred more easily and more remarkably with decreasing T(Q) for as-quenched specimens: in the case that T(Q)=448K serration was observed both for the binary and Fe added alloys, while in the case that T(Q)=573K none of the three alloys showed serration. For the binary alloy serration was observed only when the aging period was short enough, but addition of Fe to the binary alloy prolonged the aging period where serration could be recognized. Aging rate measured by hardness was remarkably retarded with the increase of Fe addition. These results confirm the interpretation that the serration in Al-Zn alloy occurs in the early stage of aging where small GP zones or solute clusters are formed. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 1 |

終了ページ | 4 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016019142 |

JaLCDOI | 10.18926/46976 |
---|---|

フルテキストURL | mfe_37_2_005_012.pdf |

著者 | Abe, Takeji| Sato, Takashi| |

抄録 | Cork is a material that has many characteristics, for instance, light weight, elasticity, insulation against heat, impermeability for liquid, and so forth. There are two types of cork, the natural and the agglomerated corks. In the present paper, compression tests of the natural and the agglomerated cork specimens were carried out. The compression test were done in various directions. Compressive stress was measured by a original compression apparatus, and stress-strain curves were obtained in various directions of the cork specimens. In the natural cork, there are differences between the radial and the non-radial direction. The recovery of dimensions after compression was also studied in respective directions. The structure of the deformed surface was observed by a scanning electron microscope. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 5 |

終了ページ | 12 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80015999990 |

JaLCDOI | 10.18926/46977 |
---|---|

フルテキストURL | mfe_37_2_013_027.pdf |

著者 | Shibuta, Taizo| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |

抄録 | Nowadays, various kind of reactor furnaces are widely used for the production in industry. The raw materials charged into the furnace generate reaction heat produced by blowing gas. Generally speaking, the reaction heat generated in the furnace is remarkably high. Therefore the occurrence of an inappropriate temperature distribution in the furnace may make damege or serious accident of the furnace. This is the motivation of furnace control. The author is considering the application of studied results to the furnace control of Blast Furnace in steel industry. To the propose, the approximated and simplified Macro Model of the Blast Furnace is constructed which has the function of representation of qualitative characteristics of the furnace in dynamical sense. The furnace temperature, distribution greatly effects both on the producting and the product quality of the furnace. Needless to say, stable furnace operation is indispensable for the economical prosperity of the industry. In this paper, macro simulation of the furnace is developed to support the analysis and design of the furnace control. Using the simulator, the stability and the control characteristics for inner furnace temperature distribtion are analised quantitatively. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 13 |

終了ページ | 27 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80015999991 |

JaLCDOI | 10.18926/46978 |
---|---|

フルテキストURL | mfe_37_2_029_044.pdf |

著者 | Imajo, Shuya| Konishi, Masami| Imai, Jun| Nishi, Tatsushi| |

抄録 | In hot strip rolling mills, the looper control system is automated. However, the looper's behavior tends to be unstable in threading. Therefore, human expert always intervenes and stabilizes the looper's behavior by tuning PID gains and interposing manipulation variable of looper control system. In this paper, we propose a method based on the recurrent neural network to express PID gains tuning action by human. Furthermore, we propose two methods to update the model by learning. To check the effectiveness of the proposed learning methods, numerical simulation applied to the looper height control is carried out. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 29 |

終了ページ | 44 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016037880 |

JaLCDOI | 10.18926/46979 |
---|---|

フルテキストURL | mfe_37_2_045_060.pdf |

著者 | Xu, Wei| Zhao, Y.| Horikane, T.| Hayata, T.| Tosuji, H.| Kagawa, Y.| |

抄録 | Resistivity distribution sounding of the non-homogeneous earth is important for electrical ground system design, geophysical prospecting and survey or monitoring the groundwater flow level. The previous paper presented that the direct inversion of the electric resistivity distribution in a domain is possible from the impedance data measured over the domain boundary using the dual reciprocity boundary element modelling in two-dimentional field [1]. The proposed inversion technique is extended to the distribution in three-dimensional space [2]. This technique is capable of inversion without iteration and meshing of the domain. Electric field with spatially varying conductivity is governed by Laplace equation, which is transformed into a Poisson-type expression with an inhomogeneous term involving the conductivity difference as a source term. Dual reciprocity method (DRM) is a technique for transforming the domain integral associated with the inhomogeneous term in Poisson equation into the boundary integral expression. The resistivity distribution in the field can thus be identified from the data observed over its boundary, for which some examples are demonstrated [2]. In this paper, the examination is extended to the case where only the data measured over the single surface is used for the inversion. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 45 |

終了ページ | 60 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016037881 |

JaLCDOI | 10.18926/46980 |
---|---|

フルテキストURL | mfe_37_2_061_066.pdf |

著者 | Vaillancourt, Chico| |

抄録 | In this case study, I will analyse and discuss the results of a survey concerning motivation towards learning a second language conducted in one Danish high school. The students surveyed were between the ages of 13-18. This section, part two of the study, was conducted in Copenhagen, Denmark. This region of the world was chosen because bilingualism is quite common there and a large portion of the school-aged community is learning a second language and often a third and even a fourth. Denmark, a European country, is different than Canada (Case Study-Part 1.) because it neighbours many countries, which use different mother tongues. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 61 |

終了ページ | 66 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120003457333 |

JaLCDOI | 10.18926/46981 |
---|---|

フルテキストURL | mfe_37_2_067_072.pdf |

著者 | Yamagiwa, Masashi| Sakai, Hiroshi| |

抄録 | An active form of Cry4A is a heterodimer of the 20- and 45-kDa fragments that are derived from the 130-kDa Cry4A protoxin. To investigate the function of these two fragments, several deletion mutants were constructed and expressed in E.coli as the GST (glutathione-S-transferase) fusion proteins. The results of the bioassay against Culex pipiens larvae showed that the interaction of two fragments of Cry4A was necessary for the toxicity, and that the C-terminal 67 amino acids of the 20-kDa fragment corresponding to the helices α4 and α5 were involved in determining the insecticidal activity. Surprisingly the lack of helix α5 did not affect the toxicity to C. pipiens, suggesting that the role of helix α5 of Cry4A was different from that postulated in the case of Cry4A toxins. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2003-03 |

巻 | 37巻 |

号 | 2号 |

開始ページ | 67 |

終了ページ | 72 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 80016019143 |