JaLCDOI | 10.18926/15501 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_24_2_67.pdf |

著者 | 名合 宏之| 前野 詩朗| |

抄録 | Many hydraulic structures are damaged by under flood flow and storm waves year after year. Many cases of dike and breakwater failure are caused by the suck out of sand from behind the revetment. This type of failure will be in close relation to the dynamic behavior of sand bed around the revetment. In this paper, from this point of view, we investigated the basic characteristics of such sand movement by small model tests and tried to explain the hydro- and soil-mechanical mechanism of this phenomenon theoretically. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1990-03-29 |

巻 | 24巻 |

号 | 2号 |

開始ページ | 67 |

終了ページ | 78 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307928 |

JaLCDOI | 10.18926/15502 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_24_2_79.pdf |

著者 | 佐藤 洋一郎| |

抄録 | In asynchronous arbiters, failures may happen, caused by metastable operations. The purpose of this study is to derive a formula to estimate such failures in a ring arbiter as mean time between failures (MTBF), under the condition that incidences of requests issued in all devices are different from each other. The operation of the arbiter is formularized by a markov chain. This chain is used to decide the probability at which each of possible failures contributes to MTBF. The sum of such probabilities gives the MTBF which can be represented as a sum of a finite number of terms. As an example, MTBF of a ring arbiter composed of 3 cells is shown. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1990-03-29 |

巻 | 24巻 |

号 | 2号 |

開始ページ | 79 |

終了ページ | 87 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307486 |

JaLCDOI | 10.18926/15503 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_9.pdf |

著者 | Mikuni, Masato| 飛田 守孝| Nishida, Norihide| 榊原 精| 山田 益男| |

抄録 | Strains induced in the Si substrates by TiN film were observed with X-ray topography. The image of the sample with TiN film 0.45μm thick was like that of a dislocation loop observed with transmission electron microscope. The images of the samples with TiN films 1.65, and 1.9μm thick were different; blackening spreaded in the <112> and <110> direction from the ring contrast in shape of four-lobed rosette pattern. Spreading extended 1.6 times longer than the radius of the ring contrast along the <112> direction. The strain field extended 0.1μm in depth from the top surface where TiN was plated. From the topographs of bent Si beam, it was found that the blackness was almost proportional to the strain. The strains induced by TiN film locally ion-plated were smaller than those observed previously when TiN was ion-plated on the whole top surface of the substrate. Fine structures were observed in the topographs which could not be explained by the kinematical theory. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 9 |

終了ページ | 15 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307429 |

JaLCDOI | 10.18926/15505 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_24_2_89.pdf |

著者 | 横平 徳美| |

抄録 | This paper considers a test set for an ALU with look ahead carry generators(LCGs). The ALU is logically partitioned into two groups of blocks, the group of one-bit operation units and LCG group. Each group is tested in parallel and exhaustively, independent of the other. And an easily testable design is applied to several blocks for decreasing the number of the input combinations of them. Under the easily testable design, a minimum test set for each group is generated, and the upper and lower bounds for a minimum test for the ALU are derived. The difference of the lower and upper bounds is not large, and a test set whose number of test vectors is equal to the upper bound can be easily obtained as the union of minimum test sets for two groups. Hence, the union can be used as a complete and practical test set for the ALU. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1990-03-29 |

巻 | 24巻 |

号 | 2号 |

開始ページ | 89 |

終了ページ | 98 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307212 |

JaLCDOI | 10.18926/15506 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_17.pdf |

著者 | 榊原 精| Kanadani, Teruto| Kaneeda, Toshiaki| Hosokawa, Norio| |

抄録 | Effect of the soft surface layer that was formed on low temperature aging of Al-Zn alloy on fatigue strength was studied under repeated tensile loading. Vickers microhardness test revealed that there existed less hardened region in the vicinity of grain boundary and surface, and that the region extends 50 to 100μm from the surface inward. From the plot of the stress amplitude against the number of cycles to failure, it is concluded that the presence of less hardened surface layer strengthens fatigue resistance of the age hardened Al-Zn alloys containing 8 to 16mass % Zn under the repeated tensile loading. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 17 |

終了ページ | 23 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307685 |

JaLCDOI | 10.18926/15507 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_24_2_99.pdf |

著者 | 谷口 健男| Fujiwara Kohji| |

抄録 | This paper presents an effective solver for a large sparse set of linear algebraic equations, which appears at the application of the finite element and the finite difference methods in engineering field. Proposed method is a family of SKYLINE METHOD, and for faster computation on the vector processors the original skyline is modified with respect to following three items; the use of inner products of matrix operations, the removal of unnecessary numerical operations and the introduction of two-dimensional array for storing the data of coefficient matrix. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1990-03-29 |

巻 | 24巻 |

号 | 2号 |

開始ページ | 99 |

終了ページ | 112 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307515 |

JaLCDOI | 10.18926/15508 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_25.pdf |

著者 | Nsunge Felix Chintu| 冨田 栄二| 浜本 嘉輔| |

抄録 | A suddenly started cold methane gas jet issuing from a 1 mm diameter orifice into still air at Mach one has been predicted using the two-equation, high Reynolds number version of k-ε turbulence model and SIMPLE algorithm which employs so called primitive variables and a hybrid scheme for treating combined diffusion and convection. Global trends of predicted radial distributions of velocity, temperature, methane concentration in the steady rear part of the transient jet and axial jet tip penetration compare reasonably well with universal profiles representing measurement for the steady jet particularly in the fully developed turbulent core and semi-empirical relation for the transient jet respectively. The prediction scheme has shown reasonably good accuracy especially in prediction of main flow parameters of a transient, high speed compressible gas jet issuing into a dissimilar surrounding gas(binary gas mixture jet). |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 25 |

終了ページ | 38 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307676 |

JaLCDOI | 10.18926/15510 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_39.pdf |

著者 | Nsunge Felix Chintu| 冨田 栄二| 浜本 嘉輔| |

抄録 | Velocity distributions and related parameters of transient and steady, turbulent air jets issuing under atmospheric conditions at Mach 0.14, 0.33 and 0.5 have been predicted using Navier-Stokes(N-S) equations for compressible flow and incompressible flow independently with the k-ε model. The closeness and consistence of the results predicted by the N-S equations for compressible and incompressible flows as well as with relevant measurement or similar prediction show that the incompressible flow assumption for at least some subsonic gas jets issuing at velocities higher than Mach 0.3, the general limit for incompressible fluid flow, can be reasonably accurate particularly in the main fully developed flow region. This suggests that the divergence term in source terms of the momentum, turbulence energy and its dissipation rate equations have negligible effects for some seemingly compressible high speed, subsonic free gas jets. The computation time is reduced by at least 18 % when incompressible flow assumption is used. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 39 |

終了ページ | 54 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307456 |

JaLCDOI | 10.18926/15511 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_55.pdf |

著者 | Ohkura Akira| 亀山 嘉正| 佐山 隼敏| 鈴木 和彦| Fukumoto Shuichi| |

抄録 | AHP can handle decision-making problems involving several criteria when some of these are difficult or impossible to compare other than numerically. When a small group of decision makers settle the multi-criteria problem by AHP, the members of group could not often reach an agreement with hierarchic structure involving objectives, criteria, sub-criteria and alternatives because they have different positions, interests, and opinions. Further, the members have different importances for criteria and sub-criteria, and have dissimilar preferences for alternatives. In this article, we reveal the troubleness of AHP in case of being used by a small group of decision makers. Moreover, we proposed a procedure of AHP which the members of group could easily agree with the structure of problem and the weights of criteria etc. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 55 |

終了ページ | 67 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307741 |

JaLCDOI | 10.18926/15512 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_69.pdf |

著者 | Tsuchiya Takao| 加川 幸雄| |

抄録 | A finite element approach to the calculation of nonlinear sound propagation is proposed. Under the assumption of a weak nonlinearity, a linearized one-dimensional equation is considered. The equation is discretized in space, and is then solved for time by using Newmark-β integration scheme, in which a numerical damping is devised. Some numerical demonstrations are made for the nonlinear sound propagation of a single-shot pulse in air. It is shown that the shock wave propagation is stably and accurately simulated by the introduction of the numerical damping. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 69 |

終了ページ | 80 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307747 |

JaLCDOI | 10.18926/15513 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_81.pdf |

著者 | Totsuji, Hiroo| |

抄録 | Numerical methods for the analysis of the proximity effect in superconducting microstructures in the dirty limit are formulated on the basis of the finite element method. One- and two-dimensional cases are considered and third order Hermite shape functions are used. The results are also applicable to investigations of electronic states in semiconductor superlattice structures. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 81 |

終了ページ | 93 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307242 |

JaLCDOI | 10.18926/15515 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_95.pdf |

著者 | Totsuji, Hiroo| Ishikura Satoshi| Takayama Norihisa| |

抄録 | Critical temperatures of two-dimensional microstructures with superconducting proximity effect in the dirty limit are evaluated for various geometrical constructions. As a numerical method, the finite element method is applied. Guidelines in estimating critical temperatures are given for the case where the decay of superconducting order parameter is either sufficiently slow or fast in comparison with the scale length of the structure. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 95 |

終了ページ | 113 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307413 |

JaLCDOI | 10.18926/15516 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_115.pdf |

著者 | 谷口 健男| Irie Hirotsugu| |

抄録 | Nested dissection method is an elimination method for a set of linear algebraic equations with minimum fillins. Physically it divides a domain into four subdomains, and each subdomain is again divided into four. This procedure is repeated till all nodes are included in some subdomains. Using this characteristic, the authors examine the efficiency of the method on the transputer. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 115 |

終了ページ | 122 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307316 |

JaLCDOI | 10.18926/15517 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_25_2_123.pdf |

著者 | Taniguchi, Takeo| Ohta, Chikashi| |

抄録 | The aim of this investigation is the proposal of 3D mesh generation method based on the Delaunay triangulation. The method is valid for the finite element modelling of any convex 3D domain into tetrahedra with optimum geometrical configuration. This paper includes the mathematical background of the mesh generation method, its detail, proposal of some efficient tools for faster and more rigorous computations, and some examples of the mesh generation. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 1991-03-28 |

巻 | 25巻 |

号 | 2号 |

開始ページ | 123 |

終了ページ | 133 |

ISSN | 0475-0071 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002307904 |

JaLCDOI | 10.18926/17822 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_43_1.pdf |

著者 | Shimizu, Kenichi| Torii, Tashiyuki| Ishida, Koki| |

抄録 | Using a fatigue testing method by which fatigue cracks can be initiated and propagated in a film adhered to cover an elliptical through-hole in a base plate subjected to push-pull cyclic loads, annealed copper films with the thickness of 100μm and those reduced the thickness from the 100μm to 50μm by an electro-polishing were fatigued under a constant stress amplitude with a stress ratio of zero. The crystal rotation behavior with the fatigue crack propagation was investigated by measuring the crystal orientation around the fatigue crack initiated from the notch root before and after fatigue testing, using EBSD (Electron Back-scatter Diffraction) method. Then, the change of crystal orientation with fatigue testing was evaluated quantitatively from the misorientation between the crystal orientation matrix on the same point obtained before and after fatigue testing. As a result, the angle of the crystal rotation obtained from the region showing the high fatigue crack propagation rate was larger than that obtained from the region showing the low fatigue crack propagation rate for the film with the thickness of 100μm, while the fatigue crack propagated faster in the film with the thickness of 50μm than that with the thickness of 100μm regardless of the small crystal rotation angles with the fatigue testing for the film with the thickness of 50μm. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2009-01 |

巻 | 43巻 |

開始ページ | 1 |

終了ページ | 7 |

ISSN | 1349-6115 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002308710 |

JaLCDOI | 10.18926/17826 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_43_8.pdf |

著者 | Umeda Ryosuke| 東辻 千枝子| 鶴田 健二| 東辻 浩夫| |

抄録 | Metamaterial which has negative permittivity and permeability is investigated via computer simulations. Effects of the nanostructure on dielectric and magnetic properties of the material are taken into account by introducing the Drude-Lorentz model in the materials dispersion. We include multi-band process in the dielectric response in order to reproduce accurately experimental values of bulk Au thin film. Size effect on the dispersion is examined by comparing the model with that of a noble metal particle. Based on the dispersion model constructed, we analyze the electromagnetic response of nanostructured metamaterials to evanescent waves at microwave and optical frequencies via finite-difference time-domain simulatioins on parallel computer. A re- focusing and an amplification of the evanescent waves propagating through a metamaterial, consisting of metal slab/vacuum stacking, is demonstrated for the frequencies of 30GHz and 744THz. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2009-01 |

巻 | 43巻 |

開始ページ | 8 |

終了ページ | 15 |

ISSN | 1349-6115 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002308833 |

JaLCDOI | 10.18926/17829 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_43_16.pdf |

著者 | Kurose Tomoyuki| 鶴田 健二| 東辻 千枝子| 東辻 浩夫| |

抄録 | The finite-difference time-domain (FDTD) method has been applied to the calculation of the phonon band structure of two-dimensional (2D) phononic crystals, consisting of metal cylinders placed periodically in liquid. By comparing several combinations of materials for metal cylinder and liquid, we analyze the dependence of the band structures on sound speed and density of liquid media. Moreover, the negative refraction of the acoustic waves is observed at the interfaces between phononic crystal slab and the liquid. We find that an acoustic“lens effect”with the slab appears due to the negative refractions. The relationship between the focal intensity in the lens effect and the band structure is discussed. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2009-01 |

巻 | 43巻 |

開始ページ | 16 |

終了ページ | 21 |

ISSN | 1349-6115 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002308928 |

JaLCDOI | 10.18926/17831 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_43_22.pdf |

著者 | 東辻 浩夫| Chai Hong| 東辻 千枝子| 鶴田 健二| |

抄録 | For the transfer of quantum information and the creation of entangled states, the application of tuned spin chains, systems of spins with the nearest-neighbor coupling tuned so as to give high efficiency, has been proposed and some examples of high performance have been given by several authors. In this article, the effect of deviations from tuned values and the effect of resultant asymmetry are investigated through numerical simulations and theoretical analyses. It is shown that there exists a system where the transfer efficiency is comparable with exactly tuned ones and, at the same time, robust to noises in the coupling constants. It is also shown that the effect of asymmetry on the efficiency of entanglement creation is of the second order when the asymmetry is small. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2009-01 |

巻 | 43巻 |

開始ページ | 22 |

終了ページ | 26 |

ISSN | 1349-6115 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002308966 |

JaLCDOI | 10.18926/17833 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_43_27.pdf |

著者 | 東辻 浩夫| |

抄録 | When the Coulomb coupling between fine particles becomes sufficiently strong in fine particle plasmas, the isothermal compressibility of the whole system diverges and we have a phase separation and an associated critical point. Experimental conditions of fine particle plasmas, densities and temperatures of components and the fine particle size, are obtained corresponding to characteristic parameters around the critical point and the dependency on ion species and other factors is discussed. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2009-01 |

巻 | 43巻 |

開始ページ | 27 |

終了ページ | 31 |

ISSN | 1349-6115 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002308947 |

JaLCDOI | 10.18926/17835 |
---|---|

フルテキストURL | Mem_Fac_Eng_OU_43_32.pdf |

著者 | 馬渕 周治| 小西 正躬| 今井 純| |

抄録 | A tractor-trailer vehicle in the factory might move on the route determined beforehand. However, automation of a tractor-trailer vehicle is difficult so that it is necessary to consider the nonlinearity of a vehicle and a trailer. In this research, the effective tracking control method of a tractor-trailer vehicle is proposed. The control method using time-state control form for a preview control is presented, and be applied a tractor-trailer vehicle with nonholonomic characteristics. Results of numerical experiments are presented to check effectiveness of the proposed control method. |

出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |

発行日 | 2009-01 |

巻 | 43巻 |

開始ページ | 32 |

終了ページ | 38 |

ISSN | 1349-6115 |

言語 | English |

論文のバージョン | publisher |

NAID | 120002308736 |