著者 Faculty of Engineering, Okayama University|
発行日 2003-03
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
37巻
2号
資料タイプ その他
著者 Faculty of Engineering, Okayama University|
発行日 2001-12
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
36巻
1号
資料タイプ その他
著者 Faculty of Engineering, Okayama University|
発行日 2001-12
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
36巻
1号
資料タイプ その他
著者 Faculty of Engineering, Okayama University|
発行日 2002-03
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
36巻
2号
資料タイプ その他
著者 Faculty of Engineering, Okayama University|
発行日 2002-03
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
36巻
2号
資料タイプ その他
JaLCDOI 10.18926/44497
フルテキストURL mfe_045_027_036.pdf
著者 Kanatani, Kenichi| Sugaya, Yasuyuki|
抄録 We describe in detail the algorithm of bundle adjustment for 3-D reconstruction from multiple images based on our latest research results. The main focus of this paper is on the handling of camera rotations and the efficiency of computation and memory usage when the number of variables is very large; an appropriate consideration of this is the core of the implementation of bundle adjustment. Computing the fundamental matrix from two views and reconstructing the 3-D structure from multiple views, we evaluate the performance of our algorithm and discuses technical issues of bundle adjustment implementation.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2011-01
45巻
開始ページ 27
終了ページ 35
ISSN 1349-6115
言語 English
著作権者 Copyright © by the authors
論文のバージョン publisher
NAID 80021759249
JaLCDOI 10.18926/46952
フルテキストURL mfe_38_1-2_039_059.pdf
著者 Kanatani, Kenichi|
抄録 We investigate the meaning of "statistical methods" for geometric inference based on image feature points. Tracing back the origin of feature uncertainty to image processing operations, we discuss the implications of asymptotic analysis in reference to "geometric fitting" and "geometric model selection", We point out that a correspondence exists between the standard statistical analysis and the geometric inference problem. We also compare the capability of the "geometric AIC" and the "geometric MDL' in detecting degeneracy. Next, we review recent progress in geometric fitting techniques for linear constraints, describing the "FNS method", the "HEIV method", the "renormalization method", and other related techniques. Finally, we discuss the "Neyman-Scott problem" and "semiparametric models" in relation to geometric inference. We conclude that applications of statistical methods requires careful considerations about the nature of the problem in question.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2004-03
38巻
1-2号
開始ページ 39
終了ページ 59
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80016889442
JaLCDOI 10.18926/46953
フルテキストURL mfe_38_1-2_061_071.pdf
著者 Kanatani, Kenichi| Sugaya, Yasuyuki|
抄録 The Tomasi-Kanade factorization for reconstructing the 3-D shape of the feature points tracked through a video stream is widely regarded as based on factorization of a matrix by SVD (singular value decomposition). This paper points out that the core principle is the affine camera approximation to the imaging geometry and that SVD is merely one means of numerical computation. We first describe the geometric structure of the problem and then give a complete programming scheme for 3-D reconstruction.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2004-03
38巻
1-2号
開始ページ 61
終了ページ 71
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80016889443
JaLCDOI 10.18926/14069
フルテキストURL Mem_Fac_Eng_OU_42_104.pdf
著者 Donghui, MA| Torii, Tashiyuki| Shimizu, Kenichi| Matsuba, Akira|
抄録 As model specimens of surface film-bonded materials, pure copper films with a thickness of 100μm were bonded to the surface of steel base with epoxy resin, where the tensile residual stress was measured by an X-ray on the surface copper film. The distribution of initial electric resistance was measured on both copper film and base specimen by a direct current potential drop technique. As a result, there was a good agreement between the measured and theoretical values. From the fatigue testing results, it was shown that the measured electric resistance increased with the fatigue crack length on the copper film, which was almost equal to the theoretical value calculated for a central slit in a plate with finite width. This was probably because the fatigue crack was opened due to the tensile residual stress on the film even under unloading condition. In addition, the internal crack length during fatigue was examined by ultrasonic testing for the film-bonded specimen. As a result, there was a difference in the fatigue crack length between the surface copper film and the inner base.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2008-01
42巻
1号
開始ページ 104
終了ページ 109
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308537
JaLCDOI 10.18926/14096
フルテキストURL Mem_Fac_Eng_OU_40_1_1.pdf
著者 馬 有理| 清水 憲一| 鳥居 太始之|
抄録 A testing for bent fatigue crack propagation under mixed-mode conditions was carried out using fatigue and annealed slant precracks with different slant angles, β ,defined as the angle between loading and precrack directions in a rectangular plate. As a result, bent fatigue crack from the fatigue precrack with β =45deg. propagated under mixed-mode conditions with mode II stress intensity factor (K(II))(est) evaluated from the discontinuous displacement measured along the crack. On the other hand, bent fatigue crack from the fatigue precrack with β =60deg. and from the annealed precracks with both slant angles of β =60deg. and β =45deg. propagated under the mode I behavior. This was because the compressive residual stress near the fatigue precrack caused contact to each other between the upper and the lower surfaces of the precrack with the smaller slant angle β . Furthermore, the fatigue crack propagation rates indicated almost the same relationship for all the data, using the mixed-mode effective stress intensity factor (K(M))(est), calculated from the discontinuous displacement measured along the bent fatigue crack.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 1
終了ページ 8
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308402
JaLCDOI 10.18926/17822
フルテキストURL Mem_Fac_Eng_OU_43_1.pdf
著者 Shimizu, Kenichi| Torii, Tashiyuki| Ishida, Koki|
抄録 Using a fatigue testing method by which fatigue cracks can be initiated and propagated in a film adhered to cover an elliptical through-hole in a base plate subjected to push-pull cyclic loads, annealed copper films with the thickness of 100μm and those reduced the thickness from the 100μm to 50μm by an electro-polishing were fatigued under a constant stress amplitude with a stress ratio of zero. The crystal rotation behavior with the fatigue crack propagation was investigated by measuring the crystal orientation around the fatigue crack initiated from the notch root before and after fatigue testing, using EBSD (Electron Back-scatter Diffraction) method. Then, the change of crystal orientation with fatigue testing was evaluated quantitatively from the misorientation between the crystal orientation matrix on the same point obtained before and after fatigue testing. As a result, the angle of the crystal rotation obtained from the region showing the high fatigue crack propagation rate was larger than that obtained from the region showing the low fatigue crack propagation rate for the film with the thickness of 100μm, while the fatigue crack propagated faster in the film with the thickness of 50μm than that with the thickness of 100μm regardless of the small crystal rotation angles with the fatigue testing for the film with the thickness of 50μm.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2009-01
43巻
開始ページ 1
終了ページ 7
ISSN 1349-6115
言語 English
論文のバージョン publisher
NAID 120002308710
JaLCDOI 10.18926/46954
フルテキストURL mfe_38_1-2_073_089.pdf
著者 Kenmochi, Yukiko| Imiya, Atsushi|
抄録 Boundary tracking and surface generation are ones of main topological topics for three-dimensional digital image analysis. However, there is no adequate theory to make relations between these different topological properties in a completely discrete way. In this paper, we present a new boundary tracking algorithm which gives not only a set of border points but also the surface structures by using the concepts of combinatorial/algebraic topologies. We also show that our boundary becomes a triangulation of border points (in the sense of general topology), that is, we clarify relations between border points and their surface structures.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2004-03
38巻
1-2号
開始ページ 73
終了ページ 89
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80016889444
JaLCDOI 10.18926/46956
フルテキストURL mfe_38_1-2_097_100.pdf
著者 Yamagiwa, Masashi| Hirao, Taichi| Kiyomi, Masaaki| Akao, Tetsuyuki| Mizuki, Eiichi| Ohba, Michio| Sakai, Hiroshi|
抄録 Bacillus thuringiensis subsp. coreanensis A2316 is a newly isolated strain from Yonakunijima Island in Japan. It produces the proteinaceous inclusion body (crystal) which has no insecticidal and hemolytic activities. When the crystal proteins were digested by proteinase K, they exhibited the strong cytotoxicity against human leukemic T cell, MOLT-4. The proteinase K-digested A2316 crystal proteins have little damage upon the cell membrane of MOLT-4, suggesting that the cell death of MOLT-4 was induced through a mechanism other than the colloid-osmotic swelling and cell lysis as caused by hitherto known B. thuringiensis crystal proteins. The 29-kDa polypeptide proved to be an active component of the proteinase K-digested A2316 crystal proteins. EC(50) of the purified 29-kDa polypeptide was 0.0579 μg/ml. The N-terminal amino acid sequence of the 29-kDa polypeptide was identical with that of p29 produced by B. thuringiensis A1519 strain and shared no significant homology with all the known proteins, suggesting that this polypeptide belong to a new family of B. thuringiensis crystal proteins.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2004-03
38巻
1-2号
開始ページ 97
終了ページ 100
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80017001823
JaLCDOI 10.18926/46969
フルテキストURL mfe_37_1_015_023.pdf
著者 Kanatani, Kenichi|
抄録 In order to facilitate smooth communications with researchers in other fields including statistics, this paper investigates the meaning of "statistical methods" for geometric inference based on image feature points, We point out that statistical analysis does not make sense unless the underlying "statistical ensemble" is clearly defined. We trace back the origin of feature uncertainty to image processing operations for computer vision in general and discuss the implications of asymptotic analysis for performance evaluation in reference to "geometric fitting", "geometric model selection", the "geometric AIC", and the "geometric MDL". Referring to such statistical concepts as "nuisance parameters", the "Neyman-Scott problem", and "semiparametric models", we point out that simulation experiments for performance evaluation will lose meaning without carefully considering the assumptions involved and intended applications.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2002-11
37巻
1号
開始ページ 15
終了ページ 23
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80015664455
JaLCDOI 10.18926/46970
フルテキストURL mfe_37_1_025_032.pdf
著者 Kanazawa, Yasushi| Kanatani, Kenichi|
抄録 We present a new method for detecting point matches between two images without using any combinatorial search. Our strategy is to impose various local and non-local constraints as "soft" constraints by introducing their "confidence" measures via "mean-field approximations". The computation is a cascade of evaluating the confidence values and sorting according to them. In the end, we impose the "hard" epipolar constraint by RANSAC. We also introduce a model selection procedure to test if the image mapping can be regarded as a homography. We demonstrate the effectiveness of our method by real image examples.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2002-11
37巻
1号
開始ページ 25
終了ページ 32
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80015664456
JaLCDOI 10.18926/46971
フルテキストURL mfe_37_1_041_049.pdf
著者 Sugaya, Yasuyuki| Kanatani, Kenichi|
抄録 We study the problem of segmenting independently moving objects in a video sequence. Several algorithms exist for classifying the trajectories of the feature points into independent motions, but the performance depends on the validity of the underlying camera imaging model. In this paper, we present a scheme for automatically selecting the best model using the geometric AIC before the segmentation stage, Using real video sequences, we confirm that the segmentation accuracy indeed improves if the segmentation is based on the selected model. We also show that the trajectory data can be compressed into low-dimensional vectors using the selected model. This is very effective in reducing the computation time for a long video sequence.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2002-11
37巻
1号
開始ページ 41
終了ページ 49
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120003457326
JaLCDOI 10.18926/46975
フルテキストURL mfe_37_2_001_004.pdf
著者 Sakakibara, Akira| Kanadani, Teruto|
抄録 Effect of addition of Fe on the occurrence of serration in Al-12mass%Zn alloys was investigated. Specimens aged at 293K for various periods after quenching from various temperatures (T(Q)), 398K to 823K, were tensile-tested at room temperature. Serration occurred more easily and more remarkably with decreasing T(Q) for as-quenched specimens: in the case that T(Q)=448K serration was observed both for the binary and Fe added alloys, while in the case that T(Q)=573K none of the three alloys showed serration. For the binary alloy serration was observed only when the aging period was short enough, but addition of Fe to the binary alloy prolonged the aging period where serration could be recognized. Aging rate measured by hardness was remarkably retarded with the increase of Fe addition. These results confirm the interpretation that the serration in Al-Zn alloy occurs in the early stage of aging where small GP zones or solute clusters are formed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2003-03
37巻
2号
開始ページ 1
終了ページ 4
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80016019142
JaLCDOI 10.18926/46976
フルテキストURL mfe_37_2_005_012.pdf
著者 Abe, Takeji| Sato, Takashi|
抄録 Cork is a material that has many characteristics, for instance, light weight, elasticity, insulation against heat, impermeability for liquid, and so forth. There are two types of cork, the natural and the agglomerated corks. In the present paper, compression tests of the natural and the agglomerated cork specimens were carried out. The compression test were done in various directions. Compressive stress was measured by a original compression apparatus, and stress-strain curves were obtained in various directions of the cork specimens. In the natural cork, there are differences between the radial and the non-radial direction. The recovery of dimensions after compression was also studied in respective directions. The structure of the deformed surface was observed by a scanning electron microscope.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2003-03
37巻
2号
開始ページ 5
終了ページ 12
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80015999990
JaLCDOI 10.18926/46979
フルテキストURL mfe_37_2_045_060.pdf
著者 Xu, Wei| Zhao, Y.| Horikane, T.| Hayata, T.| Tosuji, H.| Kagawa, Y.|
抄録 Resistivity distribution sounding of the non-homogeneous earth is important for electrical ground system design, geophysical prospecting and survey or monitoring the groundwater flow level. The previous paper presented that the direct inversion of the electric resistivity distribution in a domain is possible from the impedance data measured over the domain boundary using the dual reciprocity boundary element modelling in two-dimentional field [1]. The proposed inversion technique is extended to the distribution in three-dimensional space [2]. This technique is capable of inversion without iteration and meshing of the domain. Electric field with spatially varying conductivity is governed by Laplace equation, which is transformed into a Poisson-type expression with an inhomogeneous term involving the conductivity difference as a source term. Dual reciprocity method (DRM) is a technique for transforming the domain integral associated with the inhomogeneous term in Poisson equation into the boundary integral expression. The resistivity distribution in the field can thus be identified from the data observed over its boundary, for which some examples are demonstrated [2]. In this paper, the examination is extended to the case where only the data measured over the single surface is used for the inversion.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2003-03
37巻
2号
開始ページ 45
終了ページ 60
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 80016037881
JaLCDOI 10.18926/46980
フルテキストURL mfe_37_2_061_066.pdf
著者 Vaillancourt, Chico|
抄録 In this case study, I will analyse and discuss the results of a survey concerning motivation towards learning a second language conducted in one Danish high school. The students surveyed were between the ages of 13-18. This section, part two of the study, was conducted in Copenhagen, Denmark. This region of the world was chosen because bilingualism is quite common there and a large portion of the school-aged community is learning a second language and often a third and even a fourth. Denmark, a European country, is different than Canada (Case Study-Part 1.) because it neighbours many countries, which use different mother tongues.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2003-03
37巻
2号
開始ページ 61
終了ページ 66
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120003457333