start-ver=1.4 cd-journal=joma no-vol=49 cd-vols= no-issue=4 article-no= start-page=1118 end-page=1125 dt-received= dt-revised= dt-accepted= dt-pub-year=2011 dt-pub=201104 dt-online= en-article= kn-article= en-subject= kn-subject= en-title= kn-title=Exfoliated graphene sheets decorated with metal / metal oxide nanoparticles: simple preparation from cation exchanged graphite oxide en-subtitle= kn-subtitle= en-abstract= kn-abstract=We produced carbon hybrid materials of graphene sheets decorated with metal or metal oxide nanoparticles of gold, silver, copper, cobalt, or nickel from cation exchanged graphite oxide. Measurements using powder X-ray diffraction, transmission electron microscopy, and X-ray absorption spectra revealed that the Au and Ag in the materials (Au-Gr and Ag-Gr) existed on graphene sheets as metal nanoparticles, whereas Cu and Co in the materials (Cu-Gr and Co-Gr) existed as a metal oxide. Most Ni particles in Ni-Gr were metal, but the surfaces of large particles were partly oxidized, producing a core-shell structure. The Ag-Gr sample showed a catalytic activity for the oxygen reduction reaction in 1.0 M KOH aq. under an oxygen atmosphere. Ag-Gr is superior as a cathode in alkaline fuel cells, which should not be disturbed by the methanol cross-over problem from the anode. We established an effective approach to prepare a series of graphene-nanoparticle composite materials using heat treatment. en-copyright= kn-copyright= en-aut-name=GotohKazuma en-aut-sei=Gotoh en-aut-mei=Kazuma kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=1 ORCID= en-aut-name=KinumotoTaro en-aut-sei=Kinumoto en-aut-mei=Taro kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=2 ORCID= en-aut-name=FujiiEiji en-aut-sei=Fujii en-aut-mei=Eiji kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=3 ORCID= en-aut-name=YamamotoAki en-aut-sei=Yamamoto en-aut-mei=Aki kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=4 ORCID= en-aut-name=HashimotoHideki en-aut-sei=Hashimoto en-aut-mei=Hideki kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=5 ORCID= en-aut-name=OhkuboTakahiro en-aut-sei=Ohkubo en-aut-mei=Takahiro kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=6 ORCID= en-aut-name=ItadaniAtsushi en-aut-sei=Itadani en-aut-mei=Atsushi kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=7 ORCID= en-aut-name=KurodaYasushige en-aut-sei=Kuroda en-aut-mei=Yasushige kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=8 ORCID= en-aut-name=IshidaHiroyuki en-aut-sei=Ishida en-aut-mei=Hiroyuki kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=9 ORCID= affil-num=1 en-affil= kn-affil=Okayama Univ affil-num=2 en-affil= kn-affil=Oita Univ affil-num=3 en-affil= kn-affil=Ind Technol Ctr affil-num=4 en-affil= kn-affil=Okayama Univ affil-num=5 en-affil= kn-affil=Okayama Univ affil-num=6 en-affil= kn-affil=Okayama Univ affil-num=7 en-affil= kn-affil=Okayama Univ affil-num=8 en-affil= kn-affil=Okayama Univ affil-num=9 en-affil= kn-affil=Okayama Univ END start-ver=1.4 cd-journal=joma no-vol=104 cd-vols= no-issue= article-no= start-page=106475 end-page= dt-received= dt-revised= dt-accepted= dt-pub-year=2019 dt-pub=20190731 dt-online= en-article= kn-article= en-subject= kn-subject= en-title= kn-title=Bipolar anodic electrochemical exfoliation of graphite powders en-subtitle= kn-subtitle= en-abstract= kn-abstract=The electrochemical exfoliation of graphite has attracted considerable attention as a method for large-scale, rapid production of graphene and graphene oxide (GO). As exfoliation typically requires direct electrical contact, and is limited by the shape and/or size of the starting graphite, treatment of small graphite particles and powders, the typical form available commercially, is extremely difficult. In this study, GO nanosheets were successfully prepared from small graphite particles and powders by a bipolar electrochemical process. Graphite samples were placed between two platinum feeder electrodes, and a constant current was applied between the feeder electrodes using dilute sulfuric acid as the electrolyte. Optical microscopy, atomic force microscopy, X-ray diffractometry, Raman spectroscopy, and X-ray photoelectron spectroscopy were employed to examine the samples obtained after electrolysis. The results obtained from these analyses confirmed that anodic electrochemical exfoliation occurs in the graphite samples, and the exfoliated samples are basically highly crystalline GO nanosheets with a low degree of oxidation (C/O = 3.6–5.3). This simple electrochemical method is extremely useful for preparing large amounts of graphene and GO from small particles of graphite. en-copyright= kn-copyright= en-aut-name=HashimotoHideki en-aut-sei=Hashimoto en-aut-mei=Hideki kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=1 ORCID= en-aut-name=MuramatsuYusuke en-aut-sei=Muramatsu en-aut-mei=Yusuke kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=2 ORCID= en-aut-name=NishinaYuta en-aut-sei=Nishina en-aut-mei=Yuta kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=3 ORCID= en-aut-name=AsohHidetaka en-aut-sei=Asoh en-aut-mei=Hidetaka kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=4 ORCID= affil-num=1 en-affil=Department of Applied Chemistry, School of Advanced Engineering, Kogakuin University kn-affil= affil-num=2 en-affil=Department of Applied Chemistry, School of Advanced Engineering, Kogakuin University kn-affil= affil-num=3 en-affil=Research Core for Interdisciplinary Sciences, Okayama University kn-affil= affil-num=4 en-affil=Department of Applied Chemistry, School of Advanced Engineering, Kogakuin University kn-affil= en-keyword=Graphite kn-keyword=Graphite en-keyword=Graphene kn-keyword=Graphene en-keyword=Graphene oxide kn-keyword=Graphene oxide en-keyword=Electrochemical exfoliation kn-keyword=Electrochemical exfoliation en-keyword=Anode kn-keyword=Anode en-keyword=Bipolar electrochemistry kn-keyword=Bipolar electrochemistry END start-ver=1.4 cd-journal=joma no-vol=127 cd-vols= no-issue=5 article-no= start-page=2223 end-page=2230 dt-received= dt-revised= dt-accepted= dt-pub-year=2023 dt-pub=20230124 dt-online= en-article= kn-article= en-subject= kn-subject= en-title= kn-title=Uniform Formation of a Characteristic Nanocomposite Structure of Biogenous Iron Oxide for High Rate Performance as the Anode of Lithium-Ion Batteries en-subtitle= kn-subtitle= en-abstract= kn-abstract=Recently, Fe2O3 has been considered as an alternative anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity (approximately 1000 mA h g-1), low cost, and nontoxicity. However, its rate performance remains poor relative to that of the conventional graphite anode. In this study, Fe2O3-based anodes were prepared through the annealing of biogenous Fe2O3 (L-BIOX) samples produced by an aquatic Fe-oxidizing bacterium. The effect of the annealing temperature on the performance of the synthesized Fe2O3-based material as the anode of an LIB was investigated. Electrochemical measurements revealed that the annealed L-BIOX samples at 300-700 degrees C exhibited higher rate performances than the unannealed material. Particularly, the sample annealed at 700 degrees C exhibited the highest capacity among the synthesized materials and showed a higher performance than the previously reported Fe2O3-based anodes. It exhibited a capacity of 923 mA h g-1 even at a high current density of 2 A g-1. After annealing at 700 degrees C and discharging, the synthesized biogenous material had a uniform nanocomposite structure composed of alpha-Fe2O3 nanoparticles dispersed in an amorphous matrix of Li-Si-P oxide. To form this uniform nanostructure, the solid-state diffusion resistance of the Li+ ions in the active material was reduced, which consequently improved the rate performance of the electrode. Therefore, this study provides substantial insights into the development and improvement of the performance of novel Fe2O3-based nanomaterials as the anode of LIBs. en-copyright= kn-copyright= en-aut-name=TakahashiMasakuni en-aut-sei=Takahashi en-aut-mei=Masakuni kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=1 ORCID= en-aut-name=SakumaRyo en-aut-sei=Sakuma en-aut-mei=Ryo kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=2 ORCID= en-aut-name=HashimotoHideki en-aut-sei=Hashimoto en-aut-mei=Hideki kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=3 ORCID= en-aut-name=FujiiTatsuo en-aut-sei=Fujii en-aut-mei=Tatsuo kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=4 ORCID= en-aut-name=TakadaJun en-aut-sei=Takada en-aut-mei=Jun kn-aut-name= kn-aut-sei= kn-aut-mei= aut-affil-num=5 ORCID= affil-num=1 en-affil=Graduate School of Natural Science and Technology, Okayama University kn-affil= affil-num=2 en-affil=Graduate School of Natural Science and Technology, Okayama University kn-affil= affil-num=3 en-affil=Graduate School of Natural Science and Technology, Okayama University kn-affil= affil-num=4 en-affil=Graduate School of Natural Science and Technology, Okayama University kn-affil= affil-num=5 en-affil=Graduate School of Natural Science and Technology, Okayama University kn-affil= END