JaLCDOI 10.18926/14150
FullText URL Mem_Fac_Eng_39_1_46.pdf
Author Kadono, Keisuke| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo|
Abstract We present a real-space, polynomial-expansion approach to electron dynamics in nanostructured semiconductors. The Chebyshev expansion method is employed for efficient calculation of timeevolution of single-electron wave function. Details of the formulation are described. The method is applied to the electron transport in nanostructured semiconductors such as Si nanowires. The mean-square displacement and diffusivity of electron in Si chains are obtained as functions of length of the chains. The results show clearly ballistic behavior of electron in the pure Si chain.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 46
End Page 51
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308231
JaLCDOI 10.18926/14152
FullText URL Mem_Fac_Eng_39_1_52.pdf
Author Kanamori, Katsuya| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo|
Abstract Thermal behavior of Coulomb clusters in a three dimensional confining potential is investigated by molecular dynamics simulations for system sizes of 1,000 to 20,288 ions. The specific heat of the system of shell-structured 20,000 ions is peaked almost at the same temperature as the system of bcc-structured 20,288 ions with much sharper structure for the latter. The diffusion coefficient and the peak to valley ratio of the two-dimensional pair distribution function on the outermost shell are obtained both as a function of temperature. The rotational movement of each shell in the system of 104 ions is observed.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 52
End Page 55
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308445
JaLCDOI 10.18926/14153
FullText URL Mem_Fac_Eng_39_1_56.pdf
Author Sugaya, Yasuyuki| Kanatani, Kenichi|
Abstract We present a new method for extracting objects moving independently of the background from a video sequence taken by a moving camera. We first extract and track feature points through the sequence and select the trajectories of background points by exploiting geometric constraints based on the affine camera model. Then, we generate a panoramic image of the background and compare it with the individual frames. We describe our image processing and thresholding techniques.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 56
End Page 62
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308594
JaLCDOI 10.18926/14155
FullText URL Mem_Fac_Eng_39_1_63.pdf
Author Kanatani, Kenichi|
Abstract Geometric fitting is one of the most fundamental problems of computer vision. In [8], the author derived a theoretical accuracy bound (KCR lower bound) for geometric fitting in general and proved that maximum likelihood (ML) estimation is statistically optimal. Recently, Chernov and Lesort [3] proved a similar result, using a weaker assumption. In this paper, we compare their formulation with the author’s and describe the background of the problem. We also review recent topics including semiparametric models and discuss remaining issues.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 63
End Page 70
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308366
JaLCDOI 10.18926/14156
FullText URL Mem_Fac_Eng_39_1_71.pdf
Author Nogami, Yasuyuki| Morikawa, Yoshitaka|
Abstract This paper proposes an algorithm for generating prime order elliptic curves over extension field whose extension degree is a power of 2. The proposed algorithm is based on the fact that the order of the twisted elliptic curve is able to be a prime number when the extension degree for the twist operation is a power of 2. When the definition field is F(2(40)−87)(4) , the proposed algorithm can generate a prime order elliptic curve within 5 seconds on PentiumIII (800MHz) with C language.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 71
End Page 81
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308036
JaLCDOI 10.18926/14157
FullText URL Mem_Fac_Eng_39_1_82.pdf
Author Wang, Feng| Nogami, Yasuyuki| Morikawa, Yoshitaka|
Abstract In this paper, we focus on developing a high-speed square root (SQRT) algorithm required for an elliptic curve cryptosystem. Examining Smart algorithm, the previously well-known SQRT algorithm, we can see that there is a lot of computation overlap in Smart algorithm and the quadratic residue (QR) test, which must be implemented prior to a SQRT computation. It makes Smart algorithm inefficient. The essence of our proposition is thus to present a new QR test and an efficient SQRT algorithm to avoid all the overlapping computations. The authors devised a SQRT algorithm for which most of the data required have been computed in the proposed QR test. Not only there is no computation overlap in the proposed algorithm and the proposed QR test, but also in the proposed algorithm over GF(p(2)) (4 | p − 1) some computations can be executed in GF(p); whereas in Smart algorithm over GF(p(2)) all the computations must be executed in GF(p(2)). These yield many reductions in the computational time and complexity. We implemented the two QR tests and the two SQRT algorithms over GF(pm) (m=1, 2) in C++ language with NTL (Number Theory Library) on Pentium4 (2.6GHz), where the size of p is around 160 bits. The computer simulations showed that the proposed QR test and the proposed algorithm over GF(p(m)) were about 2 times faster than the conventional QR test and Smart algorithm over GF(p(m)).
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 82
End Page 92
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308422
JaLCDOI 10.18926/14158
FullText URL Mem_Fac_Eng_39_1_93.pdf
Author Iokibe, Kengo| Toyota, Yoshitaka| Wada, Osami| Koga, Ryuji|
Abstract The optical properties of clouds were measured with a polarization Mie lidar during April, 2004 and investigated to categorize the particles detected by the lidar. The cloud layers were categorized into five types according to the depolarization ratios, as follows: (I) constant and small (less than 5%); increasing with height (II) nearly from 0% and (III) from about 50%; (IV) large and varying with the backscattering coefficient; and (V) sharply decreasing. This categorization of clouds enabled us to separate aerosols from clouds in a lidar signal. Comparison of the backscattering coefficients between clouds of types (I) and (II) suggested that the depolarization ratio induced by multiple scattering in dense clouds does not depend on the particle density. Estimation of the particle phase for the five cloud categories was also examined.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 93
End Page 101
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308479
JaLCDOI 10.18926/15399
FullText URL Mem_Fac_Eng_OU_27_2_1.pdf
Author Kajihara, Yasuhiro| Osaki, Hirokazu|
Abstract Precedence relation in assembly has been determined by experience only. Now, an expert system is developed for determining such precedence relation. The conjugate states of the units of a product are shown in face frames and unit frames following the frame model. Seven rules are formulated. They consider geometrical interference of units, and make the precedence relation enable operation time to be shorter, and the number of JIG and substandards to be smaller. These rules are programized by computer language(PROLOG).
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1993-03-25
Volume volume27
Issue issue2
Start Page 1
End Page 9
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307210
JaLCDOI 10.18926/15400
FullText URL Mem_Fac_Eng_OU_27_2_11.pdf
Author Oka, Hisao| Yamamoto, Tatsuma| Saratani Keiji| Tanaka Masahiro| Kawazoe Takayoshi|
Abstract The use of dental implants has increased together with increases in the human life span and it has become an imperative subject for dentists to familiarize themselves with this treatment modality. Unfortunately, there has been no practical and quantitative method for in vivo evaluation of the stability of dental implants. In the tooth mobility examination, the tactile sense of natural teeth is different from that of dental implants. The authors have developed an automatic diagnosis system of tooth mobility for clinical use. The biomechanical mobility of peri-implantium is measured with a pseudo-random vibration, from which the viscoelasticity c1, c2, k of peri-implantium is obtained. The diagnosis system has been applied to the quantitative evaluation of the stability of implants : endodontics endosseous implants (titanium pin), endosseous implants (Bioceram). It has also been applied to the evaluation of the long-term prognoses of dental implantation (Bioceram) and the examination of Intramobile implant (IMZ), and the satisfactory results have been obtained.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1993-03-25
Volume volume27
Issue issue2
Start Page 11
End Page 17
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308018
JaLCDOI 10.18926/15415
FullText URL Mem_Fac_Eng_OU_29_2_29.pdf
Author Oka, Hisao| Fukuda, Takashi|
Abstract In the stiffness evaluation from the skin surface, the body structure under the skin, like a bone and muscle, influences on the measurement results. The authors developed the measurement system of biomechanical impedance with applying a vibration of acoustic frequency onto the body surface. We measured the viscoelasticity of the silicone-gel model, which involves metal blocks, from the gel surface by using this system. The internal structure of model is estimated from the relation between the viscoelasticity and the distance from the gel surface to the internal block. Applying this method, the shape of ribs of the right chest are estimated. The shapes and viscoelasticity of silicone-gel tumor model, which has two different tumors, are also estimated.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1995-03-27
Volume volume29
Issue issue2
Start Page 29
End Page 37
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307199
JaLCDOI 10.18926/15416
FullText URL Mem_Fac_Eng_OU_26_1_43.pdf
Author Bouzidi, Moncef| Koga, Ryuji| Wada, Osami| Kagawa, Naoki| Hai Xu| Kosaka, Megumi| Sano HIroya|
Abstract A numerical technique called as "adjoint spectrum" has been proposed by the authors in a previous work. Two applications of it are presented here. It is demonstrated that by generalizing the aspect of adjoint spectrum it becomes possible to measure densities of mixed gases simultaneously. An experimental proof of this has been carried on and simultaneous measurement of densities of both methane and dinitrogen oxide was realized. On the other hand, it is also reported that frequency shifting of spectra, which is a cause of error in spectrometric measurements, can be corrected by exploiting the adjoint spectrum technique in connection with the Taylor expansion. Numerical examples showing the success of this method are reported as well.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1991-11-30
Volume volume26
Issue issue1
Start Page 43
End Page 49
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307796
JaLCDOI 10.18926/15164
FullText URL Mem_Fac_Eng_OU_35_41.pdf
Author Kuroboshi, Manabu| Tanaka, Muneaki| Kishimoto, Suguru| Goto, Kentaro| Tanaka, Hideo|
Abstract In 360 females, Bone mineral density (BMD) in lumbar vertebrae (L2-L4) was assessed by quantitative computed tomography (QCT), and the values obtained were compared with the frequency of vertebral transformation or fracture as assessed by lateral scan image (scanogram) by X-ray CT. A correlation was observed between the frequency of vertebral transformation (or fracture) and lumbar BMD values : BMD under 125 mg/cm(3) was observed over 90% of women with vertebral transformation, and BMD under 70mg/cm(3) was found about 50% of them. These results suggest that decrease in BMD in lumbar vertebrae leads to vertebral transformation or fracture. Thus, measurement of BMD by QCT would be very useful in predicting vertebral transformation or fractures.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2001-03-27
Volume volume35
Issue issue1-2
Start Page 41
End Page 46
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307948
JaLCDOI 10.18926/15166
FullText URL Mem_Fac_Eng_OU_31_1_19.pdf
Author Totsuji, Hiroo| Kishimoto, Tokunari| Totsuji, Chieko|
Abstract As a model of dusty plasmas in external fields, Yuka.wa system in a one-dimensional external field is analyzed by molecular dynamics simulations and theoretical approaches. It is shown that particles form clear thin layers (sheets) at low temperatures and the number of layers changes discretely with characteristic parameters of the system, accompanying the rearrangements of whole system from nearly equipartitioned layers to also nearly equipartitioned layers. The number, positions and populations of layers are obtained as functions of characteristic parameters. The shell (sheet) model which has been successful for confined one-component plasmas is extended to this system and results of numerical experiments are reproduced to a good accuracy. The effect of cohesive energy in each layer is of essential importance to reproduce discrete changes in the number of sheets.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1996-12-27
Volume volume31
Issue issue1
Start Page 19
End Page 33
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307616
JaLCDOI 10.18926/15401
FullText URL Mem_Fac_Eng_OU_30_2_21.pdf
Author Tachibana Hiroyuki| Totsuji, Hiroo|
Abstract In order to apply quantum waveguides to electronic devices, we calculate the electrostatic potential in the split-gate quantum wire and establish the relation between the electrostatic potential and the square well potential which is usually assumed in simulations of these waveguides. The height and width of the square well potential are expressed as simple functions of the gate voltage and their dependencies are clarified. The results may be useful in calculating the characteristics of electronic devices based on quantum waveguides as functions of controllable parameters such as gate voltage.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1996-03-29
Volume volume30
Issue issue2
Start Page 21
End Page 25
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307620
JaLCDOI 10.18926/15402
FullText URL Mem_Fac_Eng_OU_30_2_27.pdf
Author Totsuji, Hiroo| Kishimoto, Tokunari| Totsuji, Chieko|
Abstract The behavior of the Yukawa system in external one-dimensional force fields is analyzed by the molecular dynamics simulation. The formation of layered structures at low temperatures is observed and the relation between the number of layers and characteristic parameters of the system is obtained. Since the Yukawa system serves as a model of clouds of dust particles in plasmas (dusty plasma) which play an important role in plasma processes of semiconductor engineering, the results may be useful to control the quality of semiconductor wafers in such processes. In simulations, periodic boundary conditions are imposed in two dimensions and deformations of periodic boundaries are allowed in order to reduce the effect of boundaries without giving too much constraint on the symmetry.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1996-03-29
Volume volume30
Issue issue2
Start Page 27
End Page 37
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307582
JaLCDOI 10.18926/15403
FullText URL Mem_Fac_Eng_OU_27_2_19.pdf
Author Nara, Shigetoshi| Totsuji, Hiroo|
Abstract Numerical simulations of a single layer recurrent neural network model in which the synaptic connection matrix is formed by summing cyclic products of succesive patterns show that complex dynamics can occur with the reduction of a connectivity parameter which is the number of connection between neurons. The structure in these dynamics is discussed from the viewpoint of realizing complex function using complex dynamics.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1993-03-25
Volume volume27
Issue issue2
Start Page 19
End Page 40
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307451
JaLCDOI 10.18926/15404
FullText URL Mem_Fac_Eng_OU_27_2_41.pdf
Author Prokop Jiri| Myojin Sho|
Abstract The fundamental objective of this paper is to aggregate and establish a set of practical principles, guidelines, and procedures to clarify and improve classification yard design and to enhance the efficiency of the design process. The paper primarily addresses theoretical and technical aspects of hump yard height and grade design, placement of the switches and the retarders. It attempts to compile and document yard design procedures, based on the Theory of Energy Head and Energy Loss. This procedures are applicable to the design of new yards, rehabilitation of the existing yards of different types and sizes including manually operated as well as highly automated classification yards.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1993-03-25
Volume volume27
Issue issue2
Start Page 41
End Page 58
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307241
JaLCDOI 10.18926/15269
FullText URL Mem_Fac_Eng_OU_35_47.pdf
Author Doumae, Yukihiro| Konishi, Masami| Imai, Jun| Asada, Hideki| Kitamura, Akira|
Abstract In this paper, an identification method of motor parameters for the diagnosis of rotor bar defects in the squirrel cage induction motor is proposed. It is difficult to distinguish the degree of deterioration by a conventional diagnostic method such as Fourier analysis. To overcome the difficulty, a motor simulator is used to identify the degree of deterioration of rotors in the squirrel cage induction motor. Using this method, the deterioration of rotor bars in the motor can be estimated quantitatively.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2001-03-27
Volume volume35
Issue issue1-2
Start Page 47
End Page 51
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307181
JaLCDOI 10.18926/15405
FullText URL Mem_Fac_Eng_OU_30_2_39.pdf
Author Totsuji, Chieko|
Abstract A simple model for oxygen ion conduction in perovskite compounds is proposed. The potential for an oxygen ion is calculated as the sum of the long range Coulomb potential and short range repulsive potential in a cubic lattice. The activation energy is estimated as the difference in the values of potential at the barrier and at the stable site. When appropriate conditions are satisfied, the activation energy has a minimum as a function of lattice constant in accordance with recent experiments.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1996-03-29
Volume volume30
Issue issue2
Start Page 39
End Page 43
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307769
JaLCDOI 10.18926/14053
FullText URL Mem_Fac_Eng_OU_42_1.pdf
Author Asatani Jun| Koumoto, Takuya| Toru Fujiwara| Tadao Kasami|
Abstract Two typical examples, the (32, 21, 6) and (64, 45, 8) extended code of primitive permuted BCH codes, are considered. The sets of minimum weight codewords are analyzed in terms of Boolean polynomial representation. They are classied by using their split weight structure with respect to the left and right half trellis sections, and for each class, the standard form is presented. Based on the results, we can generate a proper list of the minimum weight codewords of the codes.
Keywords Boolean polynomial representation extended BCH codes minimum weight codewords binary shift invariance property
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 1
End Page 9
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308333