JaLCDOI 10.18926/15472
FullText URL Mem_Fac_Eng_OU_23_2_9.pdf
Author Kuroda Tsutomu| Osaki, Hirokazu| Matsuda, Masaaki| Fujisawa Keita|
Abstract Multi-item flexible manufacturing systems have been spread to correspond the short life-cycle and the diversification of products. Part handling plays an important role to operate multi-functional robot efficiently in these systems, and many jigs are widely used to hold a part. They should be exchanged at once according to changing products. In this paper, we propose a pin jig which holds a part with two pins, and design method of the position, length and diameter of those pins for a cylindrical part. This jig has the following characteristics. As a surface of the jig is inclined to use gravity, the part can be fixed without any external forces. Therefore the structure of jig becomes simple, and loading and unloading of a part becomes easy for a robot hand.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1989-03-30
Volume volume23
Issue issue2
Start Page 9
End Page 19
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307693
JaLCDOI 10.18926/15471
FullText URL Mem_Fac_Eng_OU_24_1_25.pdf
Author Kajihara, Yasuhiro| Osaki, Hirokazu|
Abstract An expert system, in which preconditions and rules are expressed in logical formulas, is developed to support the scheduling of an automated job shop type multi-item assembly line. This system has the foIIowing characteristics to apply any case of schedulings: (1)Forward scheduling orbackward scheduling can be made. (2)The criterion on the input order of products, the dispatching process at each assembly station, and the selection of products from a buffer can be selected from several priority criteria. (3)Layout, number and velocity of vehicles, and the capacity of each buffer can be changed.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1989-11-29
Volume volume24
Issue issue1
Start Page 25
End Page 39
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307454
JaLCDOI 10.18926/15470
FullText URL Mem_Fac_Eng_OU_24_1_13.pdf
Author Uno, Yoshiyuki| Nakajima, Toshikatsu| Endo, Osamu|
Abstract The generation mechanism of crater in electrical discharge machining is analyzed with a single pulse discharge device for alloy tool steel, black alumina ceramics, cermet and cemented carbide, investigating the gap voltage, the discharge current, the shape of crater, the wear of electrode and so on. The experimental analysis makes it clear that the shape of crater has a characteristic feature for the kind of workpiece. The shape of electrode, which changes with the wear by an electric spark, has a significant effect on the shape of crater. The diameter and the depth of crater have a close relation to the discharge energy for alloy tool steel, black alumina ceramics and cermet, while those for cemented carbide are related to the discharge current. The shape factor which is the ratio of the depth to the diameter of crater is different for the work material.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1989-11-29
Volume volume24
Issue issue1
Start Page 13
End Page 24
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307269
JaLCDOI 10.18926/15469
FullText URL Mem_Fac_Eng_OU_23_2_1.pdf
Author Kamiyabu, Hideto| Sakakibara, Akira| Maeda, Hironobu| Hida, Moritaka|
Abstract Surface tension (γ(L)) and contact angle (θ) of gallium related to wettability on Teflon and other substrates (Al(2)O(3), SiO(2), glass, graphite, BN, AI, Ni, As etc.) were investigated. The values of Teflon were 0.70(6)N/m and 158° in pure argon atmosphere, and the ones of other substrates were listed in a table in this text. We were interested especially in the relative values, γ(L)'s, on the substrates as compared with γ(L) on Teflon substrate. Liquid Ga showed spreading wetting on pure Ni metal and adhesional wetting on Al (supposed to be covered by A1(2)O(3)) and on metallic polycrystal As. Surface tension of Ga was remarkably decreased by a kind of oxide contamination due to oxygen in air. The surface layer coated by the contamination was of amorphous state nearly same as liquid Ga. The amorphous coat caused liquid Ga rather high supercooling of △T~35K. It seems that the contamination layer (oxide fi1m) smeared the crystal nucleation sites on the free surface of liquid Ga
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1989-03-30
Volume volume23
Issue issue2
Start Page 1
End Page 8
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307294
JaLCDOI 10.18926/15468
FullText URL Mem_Fac_Eng_OU_23_1_69.pdf
Author Totsuji, Hiroo| Takei Makoto|
Abstract The statistical properties of two-dimensional systems of charges in semiconductor superlattices are analyzed and the dispersion relation of the plasma oscillation is calculated. The possibility to excite these oscillations by applying the electric field parallel to the structure is discussed.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-11-22
Volume volume23
Issue issue1
Start Page 69
End Page 82
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307988
JaLCDOI 10.18926/15467
FullText URL Mem_Fac_Eng_OU_23_1_61.pdf
Author Yamamoto, Yoshitake| Yamamoto, Tatsuma|
Abstract Skin impedance satisfies the Cole-Cole arc's law. The change of skin impedance during GSR (Galvanic Skin Reflex) can be expressed by the change of equivalent parallel resistance approximately. Using these characteristics, the complicated change of skin impedance during GSR can be determined continuously from the measurement value in one frequency point.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-11-22
Volume volume23
Issue issue1
Start Page 61
End Page 68
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307322
JaLCDOI 10.18926/15466
FullText URL Mem_Fac_Eng_OU_24_1_1.pdf
Author Yoshida, Akira| Ohue, Yuji| Fujii, Masahiro|
Abstract To clarify the effects of a drive system lubricant additive upon rolling fatigue of rollers manufactured from carburized and hardened steel, three types of oil were used as lubricants: one mineral base oil and the other two mineral base oils to which an S-P additive package and ATF additive package were added, respectively. These specimens were tested for sliding/rolling fatigue and examined for failure on the surface, rolling fatigue strength, and other properties. Roller surface temperatures and inter-roller frictional coefficients were found scarcely affected by the type of oil used. Irrespective of the difference in oil type, failure on the surface was found to be entirely spalling attributable to cracks generated in the subsurface. The depth at which spalling cracks had taken place was found nearly coincident with the depth at which a ratio of reversing orthogonal shear stress to hardness had amplitude A(Tyz/Hv) maximized. These depths were larger as Hertz stress became more prominent. Nevertheless, they were found hardly affected by the type of oil. Although rolling fatigue strength did not show a significant difference dependent upon the type of oil, it may be said that fatigue life would be somewhat negatively affected by an extreme pressure coated film with a content of sulfur and phosphorus.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1989-11-29
Volume volume24
Issue issue1
Start Page 1
End Page 12
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307588
JaLCDOI 10.18926/15465
FullText URL Mem_Fac_Eng_OU_23_1_49.pdf
Author Oka, Hisao| Yamamoto, Tatsuma| Isayama Yoshiharu|
Abstract In the field of dental study it is most fundamental and necessary to estimate the condition of periodontium. In order to examine a mechanical characteristics of periodontium, the theoretical displacement response to periodontal mechanical model (three elements model) are strictly solved in case of some pulse excitations. Impact excitations (rectangular, triangular and half-cycle sine pulse) are given in physical and mathematical definitions and complete solutions to the impact excitations are provided. The triangular pulse excitation which is obtained by means of a fracture of pencil-lead is most suitable. The mechanical parameters of periodontium are given using this input excitation. This is experimentally confirmed by artificial tooth model. The obtained mechanical characteristic of the periodontal tissues can be applied to clinical diagnosis.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-11-22
Volume volume23
Issue issue1
Start Page 49
End Page 60
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307622
JaLCDOI 10.18926/15464
FullText URL Mem_Fac_Eng_OU_28_2_77.pdf
Author Osaka, Akiyoshi| Kawamura Haruyuki| Miura, Yoshinari|
Abstract Amorphous films of lead oxyfluorosilicate were prepared with a rf-sputtering technique, and the distribution profiles of the component elements and chemical states of the fluoride ions were analyzed with an X-ray photoelectron spectrometer. Si atoms with an expanded coordination, O(4)Si-F, were present near the surface, and O(3)Si-F units were present in the deeper part of the films. Electrical resistance indicated transition to a conduction state for the films containing fluoride ions, while the films were crystallized to precipitate low quartz by the irradiation of He-Ne laser of 3 mW up to 1 sec.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 77
End Page 84
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307766
JaLCDOI 10.18926/15463
FullText URL Mem_Fac_Eng_OU_28_2_59.pdf
Author Nishigaki, Makoto| Sun Yao| Kohno, Iichiro|
Abstract In this paper, first, an elasto-plastic consitituve equation for unsaturated soil was developed by considering of the basically behavior of unsaturated soil. Second, the results of a number of triaxial test and a set of rigid foundation model tests were simulated by using this constitutive equation, the agreement between observed and computed results was satisfactory and confirms the possibilities of this constitutive equation.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 59
End Page 75
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307850
JaLCDOI 10.18926/15462
FullText URL Mem_Fac_Eng_OU_23_1_39.pdf
Author Osaka, Akiyoshi| Yuasa Motokazu| Miura, Yoshinari| Takahashi, Katsuaki|
Abstract Sodium borosilicate gels of compositions similar to that of Vycor(R) glass like 80SiO(2).15B(2)O(3).5Na(2)O (wt%) were prepared from hydrolysis and polycondensation of metal alkoxides under the HCl catalysis. Variation of specific surface area and porosity with temperature indicated that closed pores were opened below 400℃, and collapsed above 450℃ after the porosity reached a maximum value around 450℃. The structural evolution was examined due to IR spectra and a phase separation in the gels was observed. The solubility of the gels into 1N-HCl was studied as a function of the treatment temperature.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-11-22
Volume volume23
Issue issue1
Start Page 39
End Page 48
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307518
JaLCDOI 10.18926/15461
FullText URL Mem_Fac_Eng_OU_28_2_53.pdf
Author Totsuji, Chieko| Matsubara Takeo| Miyata Satoru|
Abstract One of the best known solid solution of perovskites is the PbTiO(3)-PbZrO(3) system which is usually abbreviated as PZT. In the phase diagram of this system, there is a drastic phase change from tetragonal to rhombohedral at the molar ratio around 50:50. The PZT crystals are widely used as a practical piezoelectric material because of its very strong piezoelectric effect near this morphotropic phase boundary. We try to explain this anomaly in piezoelectric constant by a phenomenological theory.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 53
End Page 58
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307223
JaLCDOI 10.18926/15460
FullText URL Mem_Fac_Eng_OU_28_2_45.pdf
Author Totsuji, Hiroo| Hashimoto, Seiji| Nara, Shigetoshi|
Abstract Difficulties in simulating systems composed of classical and quantum particles lie in the treatment of the many-body interactions between quantum particles and the geometrical variety of configurations of classical particles. In order to overcome these difficulties, we have developed some numerical methods and applied them to simple cases. As for stationary states, the finite element method provides us with sufficient geometrical freedom. Combined with the Kohn-Sham equation based on the density functional theory, this method virtually satisfies our requirement. In order to investigate time-dependent phenomena, we apply the time-dependent Kohn-Sham equation. Adopting the finite difference method, we are able to follow the development of quantum many-body system. As an example, we estimate the effects of the potential height, the electric field, and many-body interactions in some transition processes in quantum wells coupled by a tunneling barrier. This example is important in itself in relation to semiconductor superlattices and also serves as a benchmark for quantum simulations, variety of geometry corresponding to that of classical particles.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 45
End Page 52
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307158
JaLCDOI 10.18926/15459
FullText URL Mem_Fac_Eng_OU_23_1_31.pdf
Author Miura, Yoshinari| Yuasa Motokazu| Osaka, Akiyoshi| Takahashi, Katsuaki|
Abstract Sodium borosilicate gels of compositions similar to that of Vycor(R) glass like 80SiO(2).15B(2)O(3).5Na(2)O(wt%) were prepared from hydrolysis and polycondensation of tetraethyl orthosilicate, trimethyl borate, and sodium methylate under the HCl catalysis. Variation of the gelation time is examined as a function of the mixing ratio of the starting materials and the catalyst. The thermal behavior of the gels has been discussed on the basis of their TG and DTA traces.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-11-22
Volume volume23
Issue issue1
Start Page 31
End Page 38
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307464
JaLCDOI 10.18926/15458
FullText URL Mem_Fac_Eng_OU_28_2_33.pdf
Author Wang, Ming| Ahmed, Anis| Wada, Osami| Koga, Ryuji|
Abstract Proposed here is a convenient optical system to collimate the crescent shaped blue laser beam radiated from a Cerenkov SHG in channel waveguide configuration. This collimation system is consisted of a parabolic mirror and has a very large tolerance to the mirror displacement. The anisotropy of the nonlinear crystal on which the waveguide is fabricated has been taken into account. The optimum mirror location is given to obtain a collimated blue laser beam with an aberration less than 0.07λ. By using an objective lens, the collimated beam can be focused down to a thin beam with the spot size less than 1μm.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 33
End Page 44
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307149
JaLCDOI 10.18926/15456
FullText URL Mem_Fac_Eng_OU_28_2_21.pdf
Author Yamamoto, Kyoji| Jiao Xuezhen|
Abstract An experimental investigation has been made of the cyclone dust collector with a perforated internal rotating cylinder. The size of the rotating cylinder is of 0.5D, where D is the diameter of the cyclone body, and is the same size as the outlet tube. The dust collection efficiency as well as the pressure loss has been measured when the inlet flow speed is 9 ~ 21 m/s and the rotating speed of the cylinder is 37 ~ 63 m/s. The velocity and pressure distributions were also measured. It is found that the collection efficiency decreases and the pressure loss increases as the rotating speed increases. It is also shown that both the inward radial velocity and the upward vertical velocity become large as the rotating cylinder increases its speed. As a whole, the rotation of the internal cylinder makes worse performance of the cyclone dust collector.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 21
End Page 31
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307575
JaLCDOI 10.18926/15455
FullText URL Mem_Fac_Eng_OU_23_1_1.pdf
Author Matsuda, Masaaki| Osaki, Hirokazu|
Abstract Display equipment has been used as communication media in the factory, office, and home. In order to communicate effectively, it is necessary to clarify the characteristics of eye movement in the case of looking at the display. The development of Eye Camera enables us to measure eye movement during work, so that we can collect the many data of eye movement during work. In this study, we proposed a method to evaluate the visual work using the distribution of visual points in X and Y axis. The cumulative distribution is approximated by the logistic curve which shows the symmetry and kurtosis by the parameter. The proposed method was applied to the three typical display models, that is, the digital meter model, reading model, and game model. In the digital meter model, the visual points were distributed symmetrically along the meters, and the symmetry and kurtosis of the distribution varied by the arranged direction of the meter. In the reading model, the visual points were distributed nearly symmetrically and uniformly in each axis and they were moved around the character and line from the period of spectrum analysis. In the game model, the visual points moved according to the target and were distributed symmetrically in the Y axis. And whether the target moved vertically or horizontally, the kurtosis of the distribution became equal in each axis.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-11-22
Volume volume23
Issue issue1
Start Page 1
End Page 12
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307354
JaLCDOI 10.18926/15454
FullText URL Mem_Fac_Eng_OU_22_63.pdf
Author Myojin Syo| Kishino Keiichi| Yamada Masahito|
Abstract The paper is a case study mode choice in interregional occupational person trips. Disagregate behavioral model of logit type is applied to the occupational person trips from Tsuyama area in Okayama Prefecture to Osaka area. The model turned out to give asignificant explanation of the interregional mode choice characteristics. Travel time, travelling expenses and " with or wi thout heavy baggage " were found to be significant.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-03-31
Volume volume22
Start Page 63
End Page 70
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307421
JaLCDOI 10.18926/15453
FullText URL Mem_Fac_Eng_OU_28_2_13.pdf
Author Kusumoto, Hisao| Hida, Moritaka| Sakakibara, Akira| Nishida, Norihide| Takemoto, Yoshito| Yamada, Masuo|
Abstract The strain in Si substrate induced by locally ion-plated thin film of TiN was observed by X-ray topograph (Lang technique). Circular TiN film was deposited on one side of the Si surface. In all topographs the highest blackness attributed to kinematical diffraction effect occurred at the film edge. Rosette pattern with four-lobes was observed around the film. Blackness as a whole increased with the film thickness. Strain was observed in the depth direction of substrate by limited projection method. When the slit width was narrowed, the kinematical images disappeared, and white images appeared at the film edge. All the contrast disappeared when the TiN film was completely removed in boiling HNO(3). The strain induced by the film deposition was proved to be elastic.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 13
End Page 20
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307150
JaLCDOI 10.18926/15452
FullText URL Mem_Fac_Eng_OU_28_2_9.pdf
Author Sakakibara, Akira| Kanadani, Teruto| Nakagawa, K.| Yokota, Y.|
Abstract The state above the solubility temperature of GP zones of Al-3mass % Mg alloy, which has a tendency for precipitation and preprecipitation at low temperature, was studied by resistivity measurement. Homogenization treatment at high temperature reduced Mg atoms in the surface layer. After quenching from 623K, the specimen was annealed sequentially at various temperatures above the GP zone solvus. The stationary resistivity obtained in annealing at a temperature was the same irrespective of the starting state and increased with decreasing annealing temperature. No precipitation was observed in the annealing. The results are not in favor of the segregation of Mg atoms to the dislocation loops but of the short range clustering.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1994-03-15
Volume volume28
Issue issue2
Start Page 9
End Page 12
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307581