JaLCDOI 10.18926/14084
FullText URL Mem_Fac_Eng_OU_41_1_52.pdf
Author Inaba, Hideo| Syahrul Husain| Horibe, Akihiko| Haruki, Naoto|
Abstract The effects of heat and mass transfer parameters on the efficiency of fluidized bed drying have been studied to optimize the input and output conditions. The analysis was carried out using two different materials, wheat and corn. Energy and exergy models based on the first and second law of thermodynamic are developed. Furthermore, some unified non-dimensional experimental correlations for predicting the efficiency of fluidized bed drying process have been proposed. The effects of hydrodynamics and thermodynamics conditions such as the inlet air temperature, the initial moisture content and well known Fourier and Reynolds numbers on energy efficiency and exergy efficiency were analyzed using the developed model. A good agreement was achieved between the model predictions, non-dimensional correlations and the available experimental results.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2007-01
Volume volume41
Issue issue1
Start Page 52
End Page 62
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308668
Author Haruki, Naoto| Inaba, Hideo| Horibe, Akihiko| Tanaka, Shinji| Nakata, Toru| Sato, Kenji|
Published Date 2005-02
Publication Title 日本機械学會論文集 B編
Volume volume71
Issue issue702
Content Type Journal Article
Author Katayama, Masatoshi| Inaba, Hideo| Horibe, Akihiko| Haruki, Naoto| Manabe, Tsuyoshi|
Published Date 2004-02
Publication Title 日本機械学會論文集 B編
Volume volume70
Issue issue690
Content Type Journal Article
Author Inaba, Hideo| Matsuo, Koichi| Horibe, Akihiko|
Published Date 2004-01
Publication Title 日本機械学會論文集 B編
Volume volume70
Issue issue689
Content Type Journal Article
Author Inaba, Hideo| Seo, Jeong-Kyun| Horibe, Akihiko|
Published Date 2003-11-25
Publication Title 日本機械学會論文集 B編
Volume volume69
Issue issue687
Content Type Journal Article
Author Inaba, Hideo| Matsuo, Kouichi| Horibe, Akihiko|
Published Date 2003-09-25
Publication Title 日本機械学會論文集 B編
Volume volume69
Issue issue685
Content Type Journal Article
Author Inaba, Hideo| Kim, Myoung-Jun| Horibe, Akihiko|
Published Date 2002-09-25
Publication Title 日本機械学會論文集 B編
Volume volume68
Issue issue673
Content Type Journal Article
Author Inaba, Hideo| Horibe, Akihiko| Haruki, Naoto| Murakami, Masahiro|
Published Date 2002-05-25
Publication Title 日本機械学會論文集 B編
Volume volume68
Issue issue669
Content Type Journal Article
Author Inaba, Hideo| Haruki, Naoto| Nakata, Toru| Horibe, Akihiko| Furumoto, Naoyuki| Sato, Kenji|
Published Date 2002-02-25
Publication Title 日本機械学會論文集 B編
Volume volume68
Issue issue666
Content Type Journal Article
Author Inaba, Hideo| Kim, Myoung-Jun| Horibe, Akihiko|
Published Date 2002-01-25
Publication Title 日本機械学會論文集 B編
Volume volume68
Issue issue665
Content Type Journal Article
Author Inaba, Hideo| Matsuo, Kouichi| Horibe, Akihiko|
Published Date 2001-08-25
Publication Title 日本機械学會論文集 B編
Volume volume67
Issue issue660
Content Type Journal Article
Author Inaba, Hideo| Kida, Takahisa| Horibe, Akihiko| Kameda, Kiyohiro| Okamoto, Tamio| Seo, Joung-kuen|
Published Date 2001-08-25
Publication Title 日本機械学會論文集 B編
Volume volume67
Issue issue660
Content Type Journal Article
Author Aoyama, Shigeo| Inaba, Hideo|
Published Date 2001-02-25
Publication Title 日本機械学會論文集 B編
Volume volume67
Issue issue654
Content Type Journal Article
Author Inaba, Hideo| Kida, Takahisa| Horibe, Akihiko| Kaneda, Makoto|
Published Date 2000-12-25
Publication Title 日本機械学會論文集 B編
Volume volume66
Issue issue652
Content Type Journal Article
Author Inaba, Hideo| Horibe, Akihiko| Kawakami, Yoshiaki|
Published Date 2000-11-25
Publication Title 日本機械学會論文集 B編
Volume volume66
Issue issue651
Content Type Journal Article
Author Inaba, Hideo| Horibe, Akihiko| Takamoto, Naoki| Kawakami, Yoshiaki| Imai, Seishi|
Published Date 2000-10-25
Publication Title 日本機械学會論文集 B編
Volume volume66
Issue issue650
Content Type Journal Article
Author Inaba, Hideo| Haruki, Naoto| Horibe, Akihiko|
Published Date 2000-07-25
Publication Title 日本機械学會論文集 B編
Volume volume66
Issue issue647
Content Type Journal Article
Author Inaba, Hideo| Horibe, Akihiko| Tsukamoto, Hirofumi| Kim, Myoung-Jum|
Published Date 2000-05-25
Publication Title 日本機械学會論文集 B編
Volume volume66
Issue issue645
Content Type Journal Article
JaLCDOI 10.18926/15354
FullText URL Mem_Fac_Eng_OU_34_1.pdf
Author Song Baoyin| Inaba, Hideo| Horibe, Akihiko| Takahashi Takashi|
Abstract The experiment for investigating the falling snow melting characteristics of warm water flowing along sheet channels spread on a roof was performed in Tookamachi city, Nigata prefecture from February 6 to February 7, 1995. The sheet surface temperatures at 11 positions in 3 channels were measured. A physical model for a gas-water-snow system was constructed to compare the predicted results with the measured ones. A fully spread uniform water film in the sheet channel was observed in the experiments. The experimental results elucidated that it was feasible to use warm water flowing along sheet channels for melting falling snow on roofs. The temperature drop in the sheet channel mainly depended on the snowfall intensity, atmospheric temperature and wind speed. Under the influence of the roof edge, the temperature drop in the channel next to the side edge was much larger than that in middle channels. A water-snow two phase flow or a snow covered frozen water was experienced temporarily in the lower reaches of the water flowing channel. These suggest that a larger water flow rate is needed for the channel next to the roof edge, and a higher inlet temperature or a greater water flow rate is required for a severe weather condition. There was reasonably good agreement between the measured and predicted water temperatures.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2000-03-27
Volume volume34
Issue issue1-2
Start Page 1
End Page 12
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307686
Author Inaba, Hideo| Ozaki, Koichi| Horibe, Akihiko| Shimoyama, Rikio| Kida, Takahisa|
Published Date 1999-11-25
Publication Title 日本機械学會論文集 B編
Volume volume65
Issue issue639
Content Type Journal Article